Maytag Refrigerator Drawer, Shelf, Pan

The Storage Drawer is an OEM replacement part for Whirlpool refrigerators. It provides customizable organization for items like snack foods, beverages, and condiments inside the refrigerator cabinet. The drawer measures approximately 27"x 20"x 6".

Causes of a bad storage drawer can include broken mounting slides, making it difficult to open or close securely. Overpacking may also cause cracks in the plastic construction over time.

Symptoms of a bad storage drawer include:

• Will not stay fully closed when loaded
• Mounting brackets crack or break off from vibration
• Contents spill out easily due to loose fit

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The glide is an OEM replacement part for Whirlpool refrigerators. These glides are responsible for facilitating easy insertion and removal of the snack pan shelf from the refrigerator compartment.

Causes of bad glides can include wear and tear over time allowing increased play, compression, or cracking from repeated loading/unloading.

Symptoms of bad glides include:

• Resistance or difficulty when moving the bin
• Loose fit that causes the bin to shift out of place
• Noisy operation or vibration from the glides
• Complete breakage or separation of the glide components

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

The Glass Shelf is an OEM part for Whirlpool refrigerators. This shelf provides a stable and durable surface for storing food items within the refrigerator, helping to keep the interior organized and allowing easy access to stored items.

Causes of a bad glass shelf can include accidental impacts, overloading with heavy items, or thermal stress from placing hot containers directly on the glass.

Symptoms of a bad glass shelf include:

• Visible cracks or chips in the glass
• The shelf not fitting securely in place
• Difficulty in removing or adjusting the shelf
• Items not being properly supported, leading to instability

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Crisper Frame Support is an OEM part for Whirlpool refrigerators. This part provides structural integrity and support for the crisper drawer, ensuring it remains stable and functions smoothly. 

Causes of a bad crisper frame support can include regular wear and tear from frequent use, accidental impacts, or overloading the crisper drawer. 

Symptoms of a bad crisper frame support include:

• The crisper drawer not sliding in and out easily
• Misalignment or instability of the crisper drawer
• Visible cracks or breaks in the frame support
• Difficulty in opening or closing the crisper drawer

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Storage Pan is an OEM part for Whirlpool refrigerators. This pan, also known as a crisper drawer, is designed to store fruits, vegetables, and other fresh produce at an optimal humidity level, helping to keep them fresh for longer periods.  

Causes of a bad storage pan can include frequent use, overloading with heavy items, or accidental drops or impacts.

Symptoms of a bad storage pan include:

• Cracks or splits in the plastic
• Difficulty sliding the pan in and out
• Reduced ability to keep produce fresh
• Visible damage or warping

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Replace a cracked or missing crisper bin with this refrigerator crisper pan. It restores smooth drawer operation and keeps fruits and vegetables contained under the crisper cover so they stay organized and easy to access.

• Holds produce in the fresh food compartment and slides on the crisper tracks
• Works with the crisper cover/humidity control to help manage moisture around produce
• Replaces drawers that are cracked, chipped, warped, or missing
• Helps resolve issues like drawers that won't slide smoothly, fall off track, or won't close fully

• Unplug the refrigerator or disconnect power; remove food from the drawer
• Fully extend the drawer, lift the front to clear the stops, and pull straight out to remove
• Align the new pan on the rails and slide in until seated; do not force
• Avoid overloading the bin to prevent future damage

This shelf trim is the molded edge piece for your refrigerator shelf. It snaps in place to restore a clean, secure lip that helps keep items in place and limits spills from reaching shelves below. What it does:

• Attaches to the edge of a refrigerator shelf to create a finished barrier
• Helps retain items and contain minor spills
• Restores stability when the original trim is cracked or missing
• Common symptoms: broken or loose trim, items sliding off the shelf, trim won't stay attached

• 1 shelf trim

• Disconnect power and remove food from the affected shelf before servicing
• Lift out the shelf or bin and place it on a flat, protected surface
• Release the old trim's tabs and slide or unsnap it from the shelf—avoid forcing or flexing
• Align the new trim and press until fully seated; reinstall the shelf or bin

RIGHT HAND GLIDE

This crisper pan is the refrigerator's produce drawer. It replaces a cracked or missing bin to restore a clean, dedicated space for fruits and vegetables and smooth slide-in/slide-out access in the fresh food section. What it does:

• Provides a dedicated compartment to organize produce in the fresh food compartment
• Helps contain spills to protect shelves and liners below
• Slides on the factory rails for easy access and removal
• Common failure signs: cracks, chips, warping, staining, or a drawer that won't slide or stay on its tracks

• 1 crisper pan

• Disconnect power to the refrigerator before servicing
• Empty the old bin and slide it straight out of the tracks
• Clean and inspect tracks/rollers for debris or damage before installing
• Align the new pan with the tracks and slide it fully in; do not force

This spur gear is part of the appliance's drive assembly, transferring motor power to mating components. Replacing a worn or stripped gear restores smooth, consistent motion and helps eliminate grinding, slipping, or no-drive issues. What it does

• Transfers rotational power within the drive mechanism
• Maintains proper engagement with mating gear(s) for smooth operation
• Common failure symptoms: grinding/clicking noises, slipping or stalled movement, irregular motion
• Visual clues: rounded, chipped, or missing teeth

• One spur gear

• Disconnect power; turn off water supply before service
• Access the drive assembly and note gear orientation and any shims/washers during disassembly
• Inspect mating gears, bushings, and bearings; replace any worn components to prevent rapid re-failure
• Apply manufacturer-specified grease if required and tighten fasteners per service information

The Door Shelf Retainer Bar is an OEM part for Whirlpool refrigerators. It helps secure items on the door shelves, preventing them from falling out when the refrigerator door is opened or closed. This retainer bar is typically located on the inner side of the refrigerator door and provides additional storage space for smaller items. The retainer bar measures approximately 21” long.

Causes of a bad door shelf retainer bar can include cracks or breaks due to heavy items being placed on the shelf, wear and tear from regular use, or accidental impact. A damaged or missing retainer bar can lead to items falling out and potentially getting damaged.

Symptoms of a bad door shelf retainer bar include:

• Items falling from the door shelves
• Difficulty keeping items secure on the door
• Visible cracks or breaks in the retainer bar
• The retainer bar not fitting properly or being loose

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Drawer Glide Gear is an OEM part for Whirlpool refrigerators. This part ensures the smooth operation of refrigerator drawers, allowing them to slide in and out with ease. This gear mechanism is vital for the user-friendly access to stored food items, contributing to the efficient organization and optimization of space within the refrigerator.

Causes for replacement include physical damage such as cracks or breakage, wear that impedes smooth operation, or a malfunction that prevents drawers from opening or closing properly.

Symptoms of a bad Drawer Glide Gear include:

• Difficulty in sliding the refrigerator drawers
• Uneven movement or jamming of the drawer
• Noise when opening or closing the drawer

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This crisper drawer front replaces the damaged face of your refrigerator's produce bin, restoring a solid handhold and proper drawer fit. Install it to keep contents contained and help the drawer open, close, and align smoothly. What it does:

• Attaches to the front of the crisper pan and serves as the handhold for opening and closing
• Retains items inside the bin to prevent spills into the compartment
• Helps the drawer sit squarely and slide correctly in its tracks
• Common symptoms: cracked or missing front, loose/broken tabs, drawer hard to open/close, or popping off rails

• 1 crisper drawer front

• Disconnect power to the refrigerator before servicing
• Remove the crisper drawer and place it on a padded, flat surface
• Release the locking tabs/clips to remove the old front; avoid over-flexing the drawer box
• Align the new front and press until all tabs fully engage, then reinstall the drawer

This refrigerator crisper pan replaces a cracked or missing produce drawer. It restores smooth sliding and dependable storage for fruits and vegetables, keeping items organized and contained in the fresh food compartment.

• Provides a dedicated bin for produce in the fresh food section
• Slides on the crisper rails beneath the crisper cover/shelf
• Helps contain leaks and prevent items from falling into the compartment
• Replaces a drawer that is cracked, chipped, warped, jammed, or missing

• Fully open the refrigerator door and remove items from the old drawer
• Pull the drawer to the stop, lift the front, then angle up and out to remove
• Inspect/clean the rails and underside of the crisper cover before installation
• Align the new pan with the tracks and slide in until it is fully seated; do not force

This is the front rail for a pick-off style door shelf bin. Replacing a cracked or missing front restores the bin's ability to hold bottles and jars securely on the refrigerator door.

• Forms the front barrier of the pick-off door shelf/bin
• Snaps to the bin back to help keep items from sliding or falling out
• Typical symptoms: cracked plastic, broken locking tabs, loose or missing front panel
• Restores proper door storage and helps prevent spills

• Empty the bin and remove it from the door before replacing the front piece
• Allow plastic parts to warm to room temperature to reduce the chance of cracking
• Align the new front with the bin back and snap it into the locking tabs
• Confirm the front is fully seated before reloading the shelf

This refrigerator pick-off front is the molded front piece of the ice dispensing assembly. Replacing a cracked or missing front helps guide ice properly during dispensing and protects the auger/crusher components for smoother, more reliable operation. What it does:

• Mounts to the front of the ice container/dispenser assembly
• Guides and separates ice as it exits to reduce jams
• Restores proper dispensing when the original front is worn, warped, or broken
• Common symptoms: ice jamming at the chute, intermittent or uneven dispensing, visible cracks or missing front cover

• 1 pick-off front

• Disconnect power and remove the ice bin before servicing
• Transfer any screws/clips from the old front; align tabs and secure firmly
• Ensure the auger and crusher components rotate freely before reassembly
• Restore power and test ice dispense for smooth operation