Maytag Washer Dispenser Parts

This outer trim panel cover replaces a cracked, broken or missing exterior cover to protect internal components and restore the appliance's finished appearance. It fits where the factory cover shields wiring and mounting points. What it does:

• Protects wiring, switches and internal parts from debris and accidental contact
• Restores the appliance's exterior finish and prevents drafts or gaps
• Stops rattling or vibration caused by damaged or loose trim
• Helps keep moisture and dust out of sensitive areas

• Disconnect power to the appliance before starting any repair.
• Remove any adjacent panels or fasteners to access the cover; retain screws and clips for reassembly.
• Align cover tabs and secure with original screws or clips; do not force or overtighten to avoid cracking.
• Replace those parts before finishing the repair.

This dispenser is the exterior door component that delivers chilled water and/or ice from the refrigerator, restoring normal dispensing and preventing drips or jams. It replaces a damaged, cracked or non-functioning door dispenser. What it does

• Guides water and ice from the internal plumbing to the exterior spout so items can be dispensed from the door.
• Re-establishes a secure spout and actuator for reliable dispensing and reduced leaks.
• Stops common dispenser symptoms such as leaking at the door, stuck or loose dispenser lever, and misaligned spout.
• Helps restore normal dispensing when the door dispenser is cracked, broken, or no longer seating properly.

• One dispenser assembly.

• Disconnect power and shut off the refrigerator water supply before beginning.
• Remove the interior door panel and any trim to access the dispenser assembly; keep fasteners organized for reassembly.
• Inspect and replace any worn gaskets or seals to prevent leaks; ensure proper hose routing.
• Test operation and check for leaks after reconnecting power and water.

The Door Latch is an OEM part for Whirlpool washers. It ensures that the washer door locks securely during operation, preventing leaks and ensuring that the washer will not operate unless the door is properly closed. This latch is crucial for the safety and efficiency of the washing cycle.

Causes of a bad door latch can include wear and tear from frequent use, physical damage from slamming the door, or electrical issues that prevent the latch from locking or unlocking correctly. A malfunctioning latch can interrupt the wash cycle and compromise safety.

Symptoms of a bad Door Latch include:

• The washer door not locking or unlocking
• The washer not starting or stopping mid-cycle
• Error codes related to door lock issues
• Difficulty in opening or closing the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dispenser Drawer Assembly is an OEM part for Whirlpool front-loading washing machines. The drawer houses mechanisms that deposit detergent and fabric softener into the drum at the proper times in the wash cycle. 

Causes of a bad dispenser drawer can include wear and tear to runners, rollers, or linkage connecting it to the washer cabinet over repeated use. Mineral or chemical deposits may also jam drawer movement.

Symptoms of a bad dispenser drawer include: 

• Failure to fully retract or extend from the cabinet
• Difficulty latching or staying securely closed  
• Contents not fully dispensing into the drum
• Inconsistent or improper distribution of detergent

This OEM Whirlpool replacement drawer assembly is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore front-loading washing machines. 

The Detergent Dispenser Drawer is an OEM part for Whirlpool washers. This drawer is designed to hold and dispense detergent, fabric softener, and other laundry soaps during the wash cycle.

A bad detergent dispenser drawer can be caused by clogging, damage, or improper operation. If you notice issues such as the drawer not opening or closing smoothly, leaks or drips from the dispenser area, or improper dispensing of detergent or fabric softener, it may indicate a problem with the detergent dispenser drawer.

Symptoms of a bad detergent dispenser drawer include:

• Difficulty in opening or closing the drawer
• Leaks or drips from the dispenser area
• Improper dispensing of detergent or fabric softener
• Visible cracks or damage on the drawer

Replace your faulty detergent dispenser drawer with this genuine OEM part to restore your washer. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

Color: Grey

The Tank is an OEM part for Whirlpool washing machines. It properly dispenses detergent during the wash cycle.

Causes of a bad detergent tank can include: cracks, holes or other damage that cause leakage or improper detergent dispensing. Scaling or mineral buildup inside the tank over time may also lead to detergent dispensing issues.

Symptoms of a bad detergent tank include:

• Detergent not being fully dispensed or released during the wash
• Residue or leftover detergent remaining in the tank after cycles
• Clothes not getting properly cleaned due to insufficient detergent release

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This dispenser drawer holds and guides detergent, bleach, and fabric softener into the washer at the correct cycle time. Replacing a worn drawer helps prevent leaks, residue buildup, and improper dispensing that can affect wash results.

• Channels detergent, bleach, and softener from the 3-compartment tray into the wash
• May help when detergent remains in the drawer, leaks from the tray, or additives dispense inconsistently
• Restores smooth opening/closing and proper alignment of the dispenser tray

• Unplug the appliance and shut off water supply before servicing
• Pull the drawer out and release the locking tab to remove; reverse to install
• Transfer any reusable inserts from the old drawer if applicable
• Check for residue in the dispenser housing and clean before reinstalling

This dispenser drawer slides into the washer's dispenser housing and holds detergent and laundry additives for each cycle. Replace a cracked, stuck, or missing drawer to restore smooth operation and proper dispensing. What it does:

• Holds and organizes detergent and other laundry additives in labeled compartments
• Works with the dispenser housing to flush products into the tub at the correct time
• Helps contain liquids to reduce drips and spills around the dispenser area
• Typical failure symptoms: cracked/broken face or tabs, drawer binding or popping out, detergent left in the drawer, or water leaking at the dispenser

• 1 dispenser drawer

• Disconnect power and turn off water before servicing
• Fully extend the old drawer, press the release tab, and pull it free from the housing
• Move over any removable siphons or inserts from the old drawer if present
• Slide the new drawer in until it latches and glides smoothly; run a quick test cycle to check dispensing and leaks

This dispenser assembly mounts in the refrigerator door to provide a stable dispensing point for ice and water and restore normal use of the door dispenser. It replaces damaged or worn dispenser components to stop leaks and restore proper operation. What it does:

• Provides the exterior opening and actuator area for dispensing ice and/or water
• Guides and supports the dispense lever or actuator and related components
• Helps prevent leaks and dripping from the door dispense area
• Commonly replaced when the dispenser won't actuate, leaks, or has broken trim or lever

• Disconnect power and shut off the water supply before starting
• Door panel or inner liner removal may be required for access
• Handle trim and plastic parts carefully to avoid cracking during removal/installation
• Follow the refrigerator's service manual or tech sheet for torque and routing details

This replacement refrigerator door handle restores a secure grip and normal door operation after the original handle becomes cracked, broken, loose, or missing. It lets you open and close the fridge safely and comfortably. What it does:

• Provides a sturdy grip for opening and closing the refrigerator door
• Replaces cracked, snapped, or worn handles that no longer secure properly
• Stops handles from wobbling or pulling away from the door frame
• Restores normal usage when the original handle is missing or damaged

• Unplug the refrigerator or disconnect power before installing to prevent electrical risk
• Remove any trim or covers to access mounting screws; retain or replace existing screws as needed
• Use hand tools; avoid overtightening fasteners to prevent cracking the new handle

The Washer Detergent Container is an OEM replacement part for Whirlpool washers. It fits securely inside the dispenser drawer and is compartmentalized to hold detergent, fabric softener, and bleach. This container ensures the proper distribution of each cleaning agent during the wash cycle for optimal cleaning performance.

Over time, the detergent container may deteriorate due to exposure to chemicals, high temperatures, or buildup of residue, leading to potential leaks, blockages, or compromised distribution of cleaning agents.

Color: White

Symptoms of a faulty Washer Detergent Container include:

• Leaks from the dispenser drawer
• Clogged or restricted compartments
• Inconsistent or improper dispensing of detergent, fabric softener, or bleach

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.