Mcculloch Parts

This replacement flywheel assembly for use in chainsaws fits onto the crankshaft. It features magnets along the side that provide an electric charge when the magnets go past the ignition module. The electric charge that is created by the flywheel and ignition module passes to the spark plugs, which spark the air-fuel mix in the cylinder. The metal flywheel could become corroded, which can make parts of it brittle. Over time, the flywheel could also become worn down from natural use, and it might no longer function properly. This would mean that it would be difficult or even impossible to start the chainsaw. When this part fails, owners should replace it right away. The authentic OEM chainsaw flywheel assembly is sold individually. It is made to work with chainsaws, and it is compatible with several different brands including Husqvarna, Craftsman, Poulan, and Poulan Pro.

This is a high-quality assembly seal and bearing that is used on chainsaws by several manufacturers. The purpose of the ball bearing is to reduce friction between various moving parts in a chainsaw or another tool. The component is also used to stabilize and hold the position and angle of specific parts in lawn and garden equipment. The assembly seal and bearing experience substantial wear and may need to be replaced regularly. When replacing the assembly seal and bearing in a chainsaw, basic tools will be needed. A screwdriver, a pair of pliers, a socket set, and an impact wrench may be required for the process. First, take the chainsaw and place it on a stable and level surface. Make sure it is powered off before disconnecting the spark plug wire. The engine will need to be removed to replace the bearing and its seal. Test the tool before further use.This assembly seal and bearing are designed for use with Husqvarna, Craftsman, and Poulan chainsaws. The part is sold on an individual basis with one seal and one bearing. It is a genuine OEM replacement component that is directly sourced from the manufacturer.

This bar adjuster knob is used on a variety of chainsaws. It works by adjusting the amount of bar tension which helps to tighten the chain on a chainsaw. Without the part, the tension of the bar would not be kept in the correct area and the chain could come loose. This could result in a chainsaw that doesn't run or is too dangerous to use. A visual inspection of the knob can indicate if it is damaged or no longer working correctly.If the bar adjuster knob needs to be replaced because it's stripped or otherwise damaged, the process is simple. A hammer and screwdriver will be required to make the replacement. Pull on the handle of the adjustment knob and place a screwdriver inside to remove it. A flat screwdriver can be placed against the metal nut at an angle. Hit the back of the screwdriver with a hammer to pull the nut loose if the knob is stripped. This will help remove the knob and install a new one.This bar adjuster knob is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold individually. It is compatible with many Poulan Pro, Craftsman, and Husqvarna chainsaws.

The ignition module is an assembly that includes the condenser and the ignition boot coil that connects to the spark plug. It creates the power to generate the spark as the flywheel magnet passes the module. Then it transfers that energy into the spark plug, which will power the engine and keep it running. If the engine is idling rough or starts and then dies, it could be a sign that the spark plug or ignition module are bad. In severe cases, the engine might not start at all. Since spark plugs are a part of routine maintenance, it's usually the later issue. This ignition module can provide an exact fit for select machines. This genuine OEM ignition module is manufactured by Husqvarna to exact standards. It can be used with a number of chainsaws from Poulan, Craftsman, and Mcculloch. This durable unit is made of plastic, rubber, and metal and is sold as an entire assembly. No hardware or other accessories are included with the purchase. Always wear gloves and allow the engine to cool before performing any parts repairs or replacements.

This recoil spring is used as part of the starting mechanism for gasoline power tools such as cultivators, leaf trimmers, edgers, power vacuums, and blowers. These devices do not use battery-powered starters and thus must rely on magneto armatures and rope pulls. The recoil spring is attached to the rope pull and returns the rope to its proper place after being pulled. The coil spring receives a tremendous amount of torque again and again over time, and through aging and stretching, the spring will become inoperable and need to be replaced. Signs the recoil spring has weakened include a slackened pull from the starter rope that does not allow the engine to start or an absolutely slack pull rope. Replacing the recoil spring is a matter of detaching the pull rope and removing the starter housing. Remember to wind the pull rope around the new coil spring to allow the proper amount and length of rope. It will have to be steadied in place as the starter housing is refastened. Always use a genuine OEM replacement part, such as this one, in order to get parts that are identical to the originals. The coil is compatible with tools branded by Cub Cadet, Yard-Man, Ryobi, Bolens, MTD, and Yard Machines.

This nut is a genuine MTD part, sold individually. This nut can be used as a replacement part in tillers, string trimmers, leaf blowers, and edgers. The purpose of a nut for one of these small engine outdoor appliances is to work in conjunction with a bolt to serve as a fastening component.Because of their size, nuts can be easily lost or misplaced. They may also become stripped from wear and tear with long-term use. If a nut is lost, misplaced, or cannot serve its critical function as a fastening component within the appliance, it should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This nut is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, Bolens, and Yard-Man.

This is a genuine ignition module, also known as an ignition coil, that is designed to be used on select line trimmers. The ignition module is what connects the spark plug to the machine and is responsible for creating the spark and carrying that power back to the engine to power the unit. if the ignition module fails, the engine will not be able to start. It could start and stop, or it could fail to start entirely. Either way, replacing the ignition module will resolve the issue in most cases and can be done with this OEM part. Since it's attached to the spark plug, it's a good idea to inspect the module during regular spark plug replacement and other maintenance to check for damage. The ignition module is made from durable metal and rubber materials and is sold as an individual part. It will require a screwdriver and socket set to replace the part. Be sure to wear gloves to protect the hands and disconnect the power for safety before doing any work on electrical components like this.

This muffler cover assembly is a genuine MTD part, sold individually. This muffler cover assembly can be used as a replacement part in a variety of small engine outdoor appliances including tillers, string trimmers, and leaf blowers. The purpose of the muffler cover assembly is to provide a safe housing for the muffler so that the muffler does not suffer damage as the outdoor appliance is in operation.If the muffler cover assembly is punctured, torn, scraped, dented, warped, eroded, or otherwise damaged to the point that the muffler is exposed to potential damage, the muffler cover assembly should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This muffler cover assembly is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Ryobi, Troy-Bilt, Yard Machines, Huskee, Bolens, and Yard Man.

This is a cylinder assembly that is designed for use in various lawn and garden small engines. The cylinder assembly is a component of the starter assembly and engine. Problems with engine compression are usually the result of the cylinder assembly going bad and needing to be replaced. If the cylinder assembly is not working, the engine may not work at all. One test of the cylinder assembly is to cover the cylinder hole with a finger and pull the starter rope. If the cylinder is not working correctly, no air will come through the hole.If the cylinder assembly is not functioning, it needs to be replaced. The engine will need to be taken apart to get access to this assembly so that it can be removed and replaced. This repair requires work gloves and a basic toolset. Never work on hot engines and make sure the spark plug is removed before working on the machine.This cylinder is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The cylinder assembly is designed to fit blowers, cultivators, edgers, trimmers, and vacuums manufactured by Ryobi, Troy Bilt, MTD, Yard Machines, and Bolens.