Mcculloch Parts

The oil tank cap helps keep dirt, insects, and flying debris out of the tank and oil inside of it. Contaminated oil can wreak havoc on the inner workings of your engine because of foreign particles gumming up the mechanics. Keeping the lid tightly shut is the best way to keep your oil clean. Oil caps attach to the outside of a machine, so they are susceptible to physical damage and the elements. It is time to replace the oil cap if it will no longer connect completely to the oil tank. With this genuine OEM product from the original manufacturer, quickly and easily swap out the oil cap before anything can fall into the tank. Just remove the broken cap, feed the blocker into the tank, and screw the new cap on. Compatible with string trimmers and chainsaws made by Craftsman, Poulan, and Poulan Pro. Sold individually.

This carburetor adapter attaches to the gasket on some kinds of lawn equipment with small engines. It is made of a durable plastic material, but wear and tear or impact can cause the part to become damaged. If the part is damaged or broken, the carburetor adapter will need to be replaced with a new component.A visual inspection can determine whether the carburetor adapter should be replaced. The fuel lines and throttle linkage will first need to be removed. Next, the bolts on the carburetor should be taken out so the carburetor can be removed. Take the bolts out of the carburetor plate and remove it. This will give access to the carburetor adapter so it can be determined whether it needs to be replaced. Simply install the new part before reassembling the machine so it can be used again.This replacement carburetor adapter is designed for use with string trimmers and pole pruners manufactured by Craftsman, Poulan, Poulan Pro, and Weed Eater. It is a genuine OEM part that is directly sourced from the manufacturer. This part is sold as an individual component.

This replacement part is a cylinder shield. This is a genuine replacement part made by Husqvarna. This shield is made of durable material to keep the cylinder of the lawnmower safe during use. This cover is responsible for repelling flying debris or other objects to ensure that the engine runs smoothly and effectively. A new cylinder shield might be needed if the current one is at all damaged. This might include being dented, cracked, or bent. If the shield is unable to completely cover the cylinder it would be best to replace this part as soon as possible. The repair should be simple as most shields are able to click easily into place. This part is a genuine OEM replacement part to ensure proper fit. It is also sold individually and is sourced directly from the manufacturer.

This replacement part is a front handle intended for use in lawn mowers. This is a genuine replacement part made by Husqvarna. Handles are essential to helping the user guide the machine in the correct direction.A new front handle might be needed if the current one is broken or damaged in any way, including being dented, bent, or cracked. It is common that this part will need to be replaced after years of normal wear and tear. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. It is recommended that the user refer to the appliance manual for more detailed instructions on how to install this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by Husqvarna.

This part is a lever ignition switch, often called an ignition lever. The lever ignition switch is used on chainsaws. This part is a switch starts and stops the chainsaw. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.A new lever ignition switch may be needed if the engine will not start, if the engine suddenly dies, if the chainsaw only runs intermittently, or if the kill-switch is not engaging. A Phillips screwdriver, Torx driver, flat-head screwdriver, and ratchet/socket set will be needed to perform this replacement.This lever ignition switch is a genuine Husqvarna part. It is sold individually. This particular lever ignition switch is compatible with gas chain saws that are manufactured by Husqvarna, Poulan, and Jonsered.

This part is a replacement spring ignition switch. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or faulty spring ignition switch in a variety of gas chainsaw models.This part is essential for applying tension to the throttle control lever. If the spring ignition switch is malfunctioning, the chainsaw will not work properly, and the user will not have sufficient control over the throttle. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any work. Proper tools are required to replace this part. For more accurate information on how and where to install this spring ignition switch, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this spring ignition switch is suitable for use on several different models of gas chain saws manufactured by Husqvarna, Poulan, and Jonsered. This is a genuine part made of high-quality, durable materials and is sold individually.

The air filter works to prevent contaminants from entering the chainsaw’s carburetor. When the air filter becomes clogged with things like dust, yard clippings, pollen, and other materials, it cannot supply fresh air to the carburetor. If the carburetor does not have enough air to mix with the gasoline, it cannot create a fuel mixture for the engine. If you see signs that the engine is not running correctly, runs roughly, or does not start at all, check the air filter and replace if needed. It is important to check the air filter frequently to prevent damage or engine inefficiency. Keep several air filters on hand to make swapping them out convenient. A good rule of thumb is to replace air filters annually. This air filter is compatible with chainsaws made by Craftsman, McCulloch, and Poulan. This air filter is a genuine OEM part.

This part is specifically designed for use with chainsaws. This tube intake is designed to create a flexible path between the adapter and carburetor, ensuring efficient equipment functionality. If the tube intake becomes worn, detached, or cracked, the carburetor may not be able to properly mix the correct ratio of air and fuel, causing the engine to misfire or underperform. This tube intake is a genuine OEM replacement part that has been sourced directly from the manufacturer. This tube intake is designed to fit various different models of Husqvarna and Poulan chainsaws. Please note this part is sold individually.

The handle assist is the handle that is held to steer and control the machine during the trimming process. As the primary touchpoint, the handle has to provide enough comfort while assisting with the machine's function. This handle is designed to be gloves-friendly with a surface rough enough to provide security against slip. Use this as a replacement for a broken, loose, or worn handle. Remember always to hold the handle firmly while operating. This part is designed for use on trimmers or weed cutters made by Craftsman, Weed Eater, Poulan, or Poulan Pro. This is a genuine OEM replacement handle that will provide extra control and less hand fatigue. It is sold individually.

This part is a replacement ground strap. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a damaged or defective ground strap in a variety of chainsaw models. The ground strap works to ground a live current and is an important safety feature. Equipment should not be operated without a working ground strap. This part connects to the ignition module of the chainsaw, which transfers an electrical current to the spark plugs. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this ground strap, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this ground strap is suitable for use on several different models of chainsaws manufactured by Husqvarna, Poulan, and Jonsered. This is a genuine part made of high-quality, durable materials and is sold individually.

This is a replacement purge bulb. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a broken or defective purge bulb on various models of outdoor power equipment. The purge bulb purges air from the carburetor and draws in fuel from the fuel tank to allow the engine to start. Over time, the purge bulb can crack or become brittle, requiring replacement. Proper tools are required to replace this part and work gloves are advised. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is turned off and completely cooled down before starting any repairs. For more accurate information on how and where to install this purge bulb, the appropriate owner's manual and included diagrams should be referenced. As an authentic replacement part, this purge bulb is suitable for use on several different models of small engine power equipment such as string trimmers, leaf blowers, and edgers manufactured by Husqvarna, Craftsman, WeedEater, and Poulan. This is a genuine part made of high-quality, durable, non-corrosive materials and is sold individually.

This replacement part is an oil vent assembly. This is a genuine replacement part made by Husqvarna. This part works directly with the oil vent to ensure the proper settings and operation of the engine and machine as a whole. A new oil vent assembly might be needed if the current one is missing or damaged in any way. If the vent has been obstructed or is too dirty to clean it might be time to replace this part. Work gloves are recommended when repairing or replacing this part as the oil can stain hands and be hard to clean. It is also recommended that the engine be powered off before attempting to replace this part. This oil vent assembly is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

Combustion engines are quite loud by nature, and their sound and emissions are toned down through the use of a muffler system. In small engines, the muffler often attaches directly to the cylinder to capture the gases and reduce noise. Should that connection weaken or loosen, a replacement bolt may need to be installed to ensure a tight seal and optimal engine performance. This replacement muffler bolt is meant to be installed on edgers, blowers, trimmers and pruners from brands like Poulan, Jonesred, Weed Eater and Husqvarna. This is an OEM replacement part and is going to be responsible for fastening the machine's muffler to the cylinder. It will require the proper hex key to install properly and is considered an easy repair frequently required on many small machines.

This quality air filter cover protects and secures the air filter to the chainsaw. If the air filter cover is not in place, the air filter could become excessively dirty or damaged. Through use or impact, the air filter cover can become damaged and may need to be replaced. A quick visual inspection will tell whether there are holes or cracks in the cover that necessitate a replacement.This air filter cover replacement requires no tools. The air filter cover comes with small tabs that can be used to secure it in place over the air filter. Tug on the original air filter cover and pull it out of its place before pressing the new one into place using its plastic tabs. Reassemble any other components before use.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The air filter cover is designed to be used with chainsaws manufactured by Poulan, Poulan Pro, and Craftsman.

This replacement part is a handle clamp. This is a genuine replacement part made by Husqvarna. This part works with the handle of many lawn mowers and is able to maintain the functions of the handle itself. A new handle clamp might be needed if the current one has become damaged. This can be due to normal wear and tear and should be replaced if this is the case. If the functions of the handle are no longer working properly, it might be due to a malfunctioning handle clamp. Work gloves are recommended to ensure safety during the repair job. Be sure the engine is completely shut down during this repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.