Microwave Manual, Care Guide

This is a factory-style adhesive replacement label that restores original markings, warnings, and identification on the appliance. It helps keep important model/serial and safety information legible for service and ownership. What it does:

• Restores factory-applied markings, identification, and safety/instruction text
• Makes model/serial and wiring/installation info readable for service techs
• Replaces labels that are faded, torn, or missing, improving safety and documentation
• Non-electrical part — purely informational/identification function

• One adhesive appliance label as pictured

• Clean and dry the mounting surface; remove oils or residue for best adhesion
• Peel backing and align carefully before pressing firmly to set the label
• Avoid repositioning once applied to prevent damage; allow adhesive to cure before heavy cleaning
• No electrical disconnection required for label replacement, but follow appliance safety guidelines

This printed information label displays the appliance model, serial, electrical ratings and key manufacturing data so technicians and owners can identify the unit and specifications quickly and accurately. What it does:

• Shows model and serial numbers, voltage, and manufacturing details for identification
• Helps replacement parts and service information
• Assists technicians during diagnostics and maintenance
• Supports safe power and connection checks by showing rated electrical info

• Clean and dry the mounting surface before applying the label for best adhesion
• Peel backing and press firmly; avoid stretching or wrinkling during placement
• Replace only with the exact OEM label to preserve accurate unit information

This printed wiring diagram is the factory schematic label technicians use to identify wiring routing and component connections for safe troubleshooting and repair. It helps locate connectors, wire colors, and terminal IDs at a glance. What it does:

• Shows the appliance's electrical schematic so you can trace circuits and understand connections
• Identifies wire colors, terminal numbers, and component interconnections for diagnostics
• Useful for wiring before replacing controls or harnesses
• Helps communicate exact wiring

• One wiring diagram label/schematic

• Disconnect power to the appliance before inspecting or referencing the diagram
• Typically mounted inside the appliance cabinet or on the service panel; check common label locations
• Handle the label carefully to avoid tearing; this is a reference document, not an electrical component
• If the existing label is damaged or missing, replace it to keep accurate wiring information with the appliance

This wiring diagram is the factory service schematic that shows the electrical layout for the appliance, helping technicians and DIYers identify circuits and wire routing for accurate troubleshooting. What it does:

• Shows component locations, wiring connections, and circuit paths in plain schematic form
• Helps diagnose electrical issues like no power to components, shorts, or intermittent operation
• Clarifies connector pinouts and wire colors for safe testing with a multimeter
• Supports correct reassembly after repairs by showing original wiring routes

• One original factory wiring diagram (single printed schematic)

• Read the diagram fully before testing or disconnecting wiring; follow all safety procedures
• Always disconnect power before accessing electrical components or performing tests
• Use the diagram alongside an electrical meter for safe diagnostics

This adhesive label replaces worn or missing identification and informational markings on the appliance, restoring readable factory markings and safety/usage info. It's a simple cosmetic replacement that helps keep your appliance clearly labeled. What it does:

• Replaces faded, torn, or missing identification or information labels
• Restores readable model/serial/usage markings and safety information
• Helps owners identify the appliance and service parts
• Prevents confusion from illegible or absent labels during maintenance

• Clean and dry the surface thoroughly before applying; remove grease and debris
• Align the label carefully, then press firmly from one edge to the other to avoid bubbles
• Apply at room temperature for best adhesion; allow adhesive to set before use
• Dispose of old label according to local regulations; avoid inhaling adhesive fumes

This wiring diagram is the factory replacement schematic used to identify electrical connections, wire colors and connector locations for service and troubleshooting. It helps technicians and DIYers confirm wiring before repairing or replacing electrical components. What it does:

• Shows the appliance's electrical circuit layout, connector pinouts and wire color codes.
• Helps locate power feeds, switches, fuses and control board connections for diagnostics.
• Useful for tracing shorts, open circuits, or verifying correct harness routing during repairs.
• Aids in safe, accurate replacement of electrical parts by providing the OEM wiring view.

• One original wiring diagram schematic (paper/printed diagram).

• Always disconnect power (unplug or switch off breaker) before accessing wiring or control panels.
• Use the diagram to verify wiring against the actual harness and connectors; replace only with the identical diagram for that appliance.
• Handle the printed diagram carefully; keep it dry and stored with the appliance documentation for future service.

This replacement label reproduces the original model/serial and electrical rating decal so you can restore identification and rating information on the appliance. It helps owners model, serial, and safety data. What it does

• Displays the appliance model, serial number, and electrical ratings in a durable decal format
• Restores missing or worn identification needed for service and parts ordering
• Helps show key safety and rating information
• Adhesive-backed for direct re-application to the cabinet or component

• Clean and dry the surface; remove old adhesive and residue before applying
• Align the label carefully, then press firmly from center outward to ensure adhesion
• Apply at room temperature to allow proper bonding; avoid stretching the decal
• No electrical work is required to replace the label; do not cover vents or moving parts