Parts for Ge JVM1540DP2CC: 01 - Microwave Parts

The Handle Assembly is an OEM replacement part for GE microwaves. This assembly includes a handle used for opening and closing the microwave door. A properly functioning handle assembly provides safe and easy access to the microwave interior for loading and unloading food items.

Causes of a bad handle assembly can include damage from excess weight or stress on the handles during operation, cracks or breaks from normal usage over time, or issues affecting their usability.

Symptoms of a bad handle assembly include:

• Loose, unstable, or wobbly handles that feel unsafe to grip
• Difficulty opening or closing the microwave door
• Inability to fully access the microwave interior

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

Holds the light bulb securely in your microwave for proper interior illumination. Replace if bulb won't stay in place, socket is burned or cracked.

Illuminates your microwave interior for monitoring food during cooking. Replace when bulb burns out or dims. Verify fit with your model number before ordering.

Replace your microwave's base bottom panel if the original is cracked, damaged, or missing. This structural component forms the lower chassis foundation.

Replace your microwave's bottom base panel if cracked, rusted, or damaged. This structural part forms the lower cabinet foundation and mounting surface.

Traps grease, smoke, and odors from your microwave's ventilation system. Replace when clogged or damaged. Verify fit with your model number.

Replacement glass lens cover for microwave interior or cooktop lights. Protects bulb from food splatters. Needed when cracked, broken, or shattered.

Glass light cover for microwave cooktop lights. Shields and diffuses bulb from heat, grease, and splatter. Replace if cracked, broken, or missing.

Clear glass lens cover for over-the-range microwave cooktop light. Shields bulb from grease and splatters. Replace if cracked, broken, or missing.

Color: metallic. It measures about 6 inches wide by 4 inches deep.

Fixes microwaves with motors that start slowly or make abnormal noise. This run capacitor stores electrical energy to help motors start and run smoothly.

Fix a microwave with no power. This thermal cutoff cavity (TCO) safety device prevents overheating by cutting power when temps exceed safe limits.

Replacement door latch body for microwaves. Secures the door closed during operation. Install when original latch is cracked, broken, or won't hold door.

Microwave won't stop running or starts when door closes? A faulty door switch is likely the cause. This safety switch is a 45-minute DIY fix.

Microwave won't start or heat but light works and timer counts down? A faulty monitor switch is often the cause. DIY repair typically under 30 minutes.

Replacement door latch lever bracket for microwaves. Installs behind the control panel to hold interlock switches. Needed when bracket is cracked or broken.

If your microwave heats unevenly or has hot and cold spots, a damaged stirrer blade is often the cause. This part distributes microwaves for even cooking.

Stirrer blade holder for microwave ovens. Mounts inside the cavity to secure the waveguide stirrer fan. Replace if cracked, broken, or missing.

Plastic cover that shields the stirrer assembly inside your microwave. Replace if cracked, melted, broken, or missing to protect internal components.

Connects the turntable motor to the glass tray in your microwave. Replace if cracked, broken, or worn to restore smooth rotation and prevent slipping.

Microwave turntable not turning? The turntable motor rotates the glass tray for even heating. Simple DIY repair with basic tools in under an hour.

Fix a microwave that won't heat or makes loud humming noises. This high voltage capacitor often fails when the magnetron can't generate heat properly.

Microwave not heating but lights and timer work? The high voltage diode converts AC to DC for the magnetron. DIY repair in 1-2 hours with basic tools.

Mounting bracket for microwave ovens. Secures the unit to the wall or cabinet. Replace if bent, broken, or missing during installation or repair.

Plastic cover that fits over the air damper assembly to help direct airflow. Replace if your original cover is cracked, broken, worn, or missing.

Controls exhaust airflow in over-the-range microwaves. Replaces bent, damaged, or missing damper assemblies for proper external venting installation.

Secures microwave to wall cabinet mounting bracket. Replace if cracked, stripped, or missing to restore proper cabinet installation and stability.

Power cord assembly for microwave ovens. Supplies electrical connection from wall outlet to unit. Replace if cord is frayed, damaged, or missing.

Outer door panel for your microwave. Replaces chipped, cracked, or damaged exterior door frames. Restores clean appearance and door structure.

Fixes microwaves with no power or that stop mid-cycle. This thermostat switch monitors temperature and protects against overheating. Simple repair.

Microwave not heating? The magnetron generates the microwaves that heat food. Common repair for units that run but don't warm. DIY-friendly repair.

Microwave won't heat or power on? This bottom thermal cut-off protects against overheating by cutting power when excess heat is detected. Easy fix.

Microwave runs but won't heat food? This high-voltage transformer powers the magnetron to generate heat. Restores cooking function when failed.

Base plate assembly for over-the-range microwaves. Provides structural mounting support. Replace if cracked, broken, or missing during installation.

Microwave not heating? A failed magnetron assembly prevents heating and defrosting. This replacement part restores microwave energy generation.

Rear wall mounting plate bracket that supports over-the-range microwaves during installation. Replace if bent, broken, or missing for secure wall mount.

Supports and guides the microwave turntable ring for smooth rotation. Replace if cracked, broken, or wheels keep falling off causing alignment issues.

Glass turntable tray rotates food for even heating in your microwave. Replace if cracked, broken, or chipped from accidental drops or impacts.

Secures microwave components and mounting brackets. Replace this hardware assembly if screws are stripped, bolts are missing, or fasteners are damaged.

Wire harness assembly for microwaves. Connects electrical components inside the unit. Replace if wires are frayed, damaged, or connectors are broken.

Washered screw secures panels, brackets, and internal microwave components. Replace if screw is missing, stripped, or damaged to restore proper fit.

Flat bolt fastener for securing microwave to cabinets or wall brackets. Replace missing, stripped, or corroded mounting hardware to restore secure installation.

Color: Black

Color: Bisque

Color: Stainless Steel

Clean Steel

Direct replacement noise filter assembly for microwaves. Reduces electrical interference. Replace if cracked, damaged, or missing to restore clean power.

Support plate that mounts and secures the power control module inside your microwave. Replace if cracked, broken, or missing to properly hold the control board.

Replacement control panel cover for microwave ovens. Restores the front console's appearance and protects controls from spills. Needed when cracked or broken.

This condenser fan motor circulates air across the condenser coils to help the refrigerator release heat and run efficiently. Replacing a worn motor restores proper airflow and can improve cooling performance. What it does:

• Spins the condenser fan blade to expel heat from the condenser coils
• Helps maintain correct compressor and system temperatures
• Runs continuously or with the compressor depending on the model
• Common symptoms: refrigerator running hot, poor cooling, loud or grinding noises from the rear, or fan not spinning

• One condenser fan motor

• Disconnect power to the appliance before servicing to avoid electrical shock
• Typical installation requires basic hand tools and access to rear or bottom rear panel
• If the fan blade is damaged or obstructed, replace or clear obstructions while motor is removed

This spring blade is a small metal tension spring that restores proper tension and movement in the appliance's linkage or latch assembly. It replaces worn or broken blades to help restore normal door or component action. What it does:

• Provides tension and return force in linkage, latch or lever assemblies
• Helps stop sagging, slipping or loose movement in the affected mechanism
• Can reduce related rattling or binding caused by a worn spring blade
• Restores reliable engagement where a broken or fatigued blade allowed failure

• Unplug the appliance or shut off power before starting any repair
• Verify orientation and engagement of the blade before final assembly
• Use proper hand tools; the blade may be under tension—wear safety goggles and gloves
• If the assembly uses multiple springs, replace all worn parts to ensure balanced function

Supports the removable wire rack inside your microwave cavity. Replace this holder if cracked, broken, or missing to restore stable two-level cooking capability.

Wire holder clip secures internal wiring in your microwave. Replace if wires are loose or rattling. Verify fit with your model number before ordering.

Cosmetic badge logo for your microwave door or control panel. Replace this emblem if the original is cracked, faded, peeling, or missing to restore appearance.

Replace your microwave's touch pad control panel if the surface is cracked, worn, or unresponsive. This assembly installs on the front exterior.

Replace your microwave's control panel assembly when the touch pad is cracked, unresponsive, or damaged. Restores the front interface area for controls.

Replace a cracked, damaged, or unresponsive microwave control panel assembly. Restores secure fit and access to touchpad, display, and switches.