Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Parts for Kenmore 267.1532413 (2671532413, 267 1532413): Motor & Drive Assembly Parts

Parts for Kenmore 267.1532413 (2671532413, 267 1532413): Motor & Drive Assembly Parts

Location on Diagram
Part Description
Price & Availability
37
Product photo
By: Ge
Part Number: WH01X10612

Secures panels and internal components in your laundry center. Replace this 1/4-20 Taptite hex washer-head screw if missing, stripped, or worn.

More
$17.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
38
Product photo
By: Ge
Part Number: WH01X10614

5/16-18 hex screw secures panels and components in laundry centers. Replace stripped, broken, or missing fasteners to restore proper fit and alignment.

More
$9.34

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
39
Product photo
By: Ge
Part Number: WH01X10616

Hex pan thread screw for washer dryer combo units. Secures panels and components to the frame. Replace missing, stripped, or damaged fasteners.

More
$9.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
302
Product photo
4.8 (5)
By: Ge
Part Number: WH16X10186

Fixes loud spin cycle noise, leaking from bottom, or poor agitation. This transmission assembly drives wash and spin cycles. Moderately difficult repair.

More
$269.72

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
304
Best Seller
Product photo
4.6 (7)
By: Ge
Part Number: WH08X24594

Seals the gap between outer tub and wash basket to prevent leaks. Replace if water leaks from bottom during wash cycles. Confirm fit by model number.

More
$28.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
305
Best Seller
Product photo
5.0 (1)
By: Ge
Part Number: WH01X10606

This shifter spring helps engage and return the transmission shifter mechanism in select top-load washers, allowing smooth changes between agitation and spin for reliable wash performance.

  • Maintains proper tension on the shift mechanism between agitate and spin
  • A worn or broken spring can cause no spin, no agitate, or loud shifting noises
  • May also lead to intermittent shifting or incomplete cycles
  • Restores consistent mechanical engagement of the drive system
What's included: One shifter spring Install notes:
  • Unplug the washer and shut off water supply before servicing
  • Access is typically from the cabinet/rear; support the tub to prevent movement
  • Note spring orientation and attachment points before removal
  • Use needle-nose pliers or a spring tool; replace any severely worn mating parts

More
$9.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
306
Product photo
By: Ge
Part Number: WH01X28559

Shifter hub connects the drive system to the agitator and spin mechanism in washers. Replace if cracked, worn, or broken to restore proper shifting.

More
$13.36

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
307
Best Seller
Product photo
By: Ge
Part Number: WH16X10147

Mounts in the washer's drive mechanism to support the shift fork. Replace if the assembly is cracked, broken, or worn to restore proper gear shifting.

More
$87.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
308
Product photo
5.0 (1)
By: Ge
Part Number: WH38X10018

Mounts on the transmission shaft to transfer motor power for agitation and spin. Replace if worn, cracked, or causing belt tracking issues.

More
$21.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
309
Product photo
By: Ge
Part Number: WH01X10611

Secures the drive pulley to the motor shaft in your washer. Replace if worn, loose, or missing to prevent pulley wobble and maintain proper belt alignment.

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

310
By: Ge
Part Number: WH01X10613

Protective shield for washer dryer combo tubs. Replaces cracked, broken, or missing shields. Installs around the tub to prevent damage and leaks.

More
$17.63

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
311
Product photo
4.7 (3)
By: Ge
Part Number: WH49X20495

This replacement kit combines the washer's drive motor with a protective tub shield. It restores agitation and spin performance and helps guard the new motor from splash-related moisture so your washer runs reliably through complete cycles. What it does:

  • Provides the mechanical power for the washer's agitation and spin functions
  • Tub shield deflects water and debris away from the motor area to reduce moisture exposure
  • Helps with symptoms such as no spin or no agitation, a motor that only hums, or a burning odor from the motor area
  • Useful when the original motor was damaged by leaks or corrosion
What's included:
  • One drive motor and one tub shield
Install notes:
  • Disconnect power and water supply before servicing; wear gloves and eye protection
  • Access the motor from the underside/front depending on the model; support the washer securely if tilting
  • Move wiring connectors one at a time and transfer any brackets or pulley/belt components as configured on your unit
  • Seat the tub shield properly, ensure wires are clear of moving parts, then run a test cycle to check operation and for leaks

More
$234.58

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
312
Product photo
By: Ge
Part Number: WH12X20439

Fix sensor errors and intermittent operation with this washer dryer combo support sensor board. Routes sensor signals to main control for reliable performance.

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

313
Best Seller
Product photo
By: Ge
Part Number: WH01X10608

Secures the drive pulley to the motor shaft in your laundry center washer. Replace if stripped, missing, or loose to restore a solid pulley connection.

More
$75.22

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
317
Best Seller
Product photo
5.0 (4)
By: Ge
Part Number: WH01X20436

This drive belt transfers motor power to your washer dryer combo's pulley system. Replace when you notice squealing, slipping, or burning odors.

More
$22.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
318
Product photo
4.6 (5)
By: Ge
Part Number: WH01X10617
$12.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
319
By: Ge
Part Number: WH03X20508

The Grommet is an OEM part for GE washing machines. Found around openings or connection points, it provides a resilient seal to prevent vibration noises and water entry.

Causes of a bad grommet include cracks, tears, or compression from extended use that eliminates the noise-dampening function. 

Symptoms of a bad grommet include:

  • Loud buzzing or knocking sounds heard through walls/cabinet during use  
  • Water stains or damage detected inside the washer's surrounding areas
  • Gaps visible where the grommet no longer properly seals an opening

This OEM GE replacement grommet is also compatible with some Hotpoint, RCA, and Kenmore models. Prevent noise complaints and leaks by relying on quality grommets. Replace yours today for smoother operation and protection against water damage.

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

325
Best Seller
Product photo
4.7 (6)
By: Ge
Part Number: WH01X10618

Secures the inner tub to the drive shaft in top-load washers. Replace if corroded, stripped, or damaged during tub seal or transmission repairs.

More
$13.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
461
Product photo
By: Ge
Part Number: WZ5X158D

Size: 8-32 t. Includes 12 screws.

More
$27.34

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
911
Best Seller
Product photo
By: Ge
Part Number: WL49X20360

The Kit Sensor Speed is an OEM part for GE washing machines. It plays a crucial role in monitoring the drum's speed and movement, ensuring that the washer operates with optimal efficiency and precision. This sensor helps adjust the spin cycle based on the load, which is essential for proper balancing and to prevent excessive vibration and noise.

Symptoms of a failing Kit Sensor Speed include:

  • The washer experiencing unbalanced loads frequently
  • Excessive vibration during the spin cycle
  • The washing machine making louder than normal noises
  • Error codes related to the drum speed appearing on the display

Causes of a bad sensor can stem from electrical faults like wiring issues or component malfunctions, physical damage from overload or impacts, or simply wear and tear over time.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

More
$33.31

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google