Mtd Ignition Controls

This is a genuine replacement ignition key that is manufactured by MTD for use in select models of outdoor power equipment. The ignition key is a plastic piece that is inserted into the ignition cylinder to start the machine. Turning the plastic key will signal to the engine to fire. This is a durable plastic piece, but it can become damaged or lost over time, which will render the machine unable to start. Replacing it will be necessary in order to operate the unit. This genuine OEM ignition key is manufactured to exact standards. It can be used in snowblowers and snow throwers from MTD, Yard Machines, Troy-Bilt, Cub Cadet, Yard-Man, and Husky. The durable plastic key is sold as an individual unit and does not require any tools for installation. This is a simple replacement that should only take a couple of minutes. In the event that the old key is damaged or stuck in the ignition, it may take more effort. It is important to disconnect the power supply for safety before performing any repairs, as well as to wear gloves for hand protection.

This is an ignition coil/module assembly for a string trimmer. Ignition coils are generally found on yard equipment that uses a motor, like lawnmowers and trimmers. It sends electric pulses to the spark plug so that the equipment can start.A faulty ignition coil can cause an array of problems. If the machine isn't starting it may need to be replaced. Sometimes, engine problems may be caused by other parts, so be sure to confirm that it is the ignition coil causing the trouble. An ignition tester can be used to tell if it needs to be replaced. The clutch and the engine will have to be removed to access the old ignition coil, once it has been accessed it can be aligned on the magnets of the engine and put back together for the machine to work again.This is an OEM replacement part sourced directly from the manufacturer and it is sold individually. It is for use with these brands: Yard-Man, MTD, Cub Cadet, and Troy-Bilt.

The ignition coil is a standard part of internal combustion engines on lawn and garden equipment. This coil consists of the ignition plug, plastic housing, and metal wires that include a flexible plastic casing. The coil is responsible for connecting the spark plug and transmitting the current that creates the spark that allows the engine to fire. This coil may develop wiring problems or the rubber and plastic parts may become worn and damaged over time. This will require a full replacement of the assembly. It is a good idea to inspect the coil when changing the spark plug as a part of routine maintenance, as well. This genuine OEM ignition coil is compatible with lawn and garden equipment from Troy-Bilt, MTD, Yard Machines, Yard Man, HUSKEE, and Cub Cadet. It can be used on more than 150 lawn and garden machines, including lawn mowers, log splitters, and chipper/shredder models. This coil assembly includes the ignition plug, metal wires encased in plastic, and a plastic housing. The hardware required to install this part is sold separately, as are all other components. Be sure to wear gloves and allow the engine to cool before working on the ignition or other components.

This is a set of two keys that are used with lawn tractors. Keys are put into the ignition and turned to start the engine.A new set of keys will be needed if the originals are cracked, broken, bent, or damaged in any way such that the key will not slide into the ignition. Keys can also be easy to misplace, which is another reason why someone may want to replace their keys. It's also a good idea to have extras on hand in the event that the keys are lost.This key set is a genuine MTD part. It is sold individually. This particular key set is compatible with lawn tractors that are manufactured by the MTD brand and Craftsman brand.

This ignition module is a genuine MTD part, sold individually. This ignition module can be used as a replacement part in a tiller or an edger. The purpose of the ignition coil in a tiller or an edger is to fire the spark plugs so that the engine can be powered on.The ignition module in a tiller or an edger might stop functioning at some point within the standard lifespan of the appliance; this could occur as a result of general wear and tear, exposure to the elements, or a collision with a hard object that damages the component beyond functionality. If the ignition module no longer fires up the spark plugs when it is supposed to do so, the ignition module should be removed and replaced by this genuine OEM replacement part before using the tiller or edger again.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This ignition module is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Ryobi, Craftsman, and Troy-Bilt.

This is a genuine ignition module, also known as an ignition coil, that is designed to be used on select line trimmers. The ignition module is what connects the spark plug to the machine and is responsible for creating the spark and carrying that power back to the engine to power the unit. if the ignition module fails, the engine will not be able to start. It could start and stop, or it could fail to start entirely. Either way, replacing the ignition module will resolve the issue in most cases and can be done with this OEM part. Since it's attached to the spark plug, it's a good idea to inspect the module during regular spark plug replacement and other maintenance to check for damage. The ignition module is made from durable metal and rubber materials and is sold as an individual part. It will require a screwdriver and socket set to replace the part. Be sure to wear gloves to protect the hands and disconnect the power for safety before doing any work on electrical components like this.

The ignition module coil is part of a blower's ignition assembly. The coil inside the ignition module is charged by the flywheel. The module then sends this charge through the ignition wire and on to the spark plug to start the engine. If the ignition coil fails due to age or excessive use, the engine will not crank, and the ignition coil will have to be removed and replaced.Always wear work gloves and safety goggles when working on equipment. Remove the spark plug and empty the fuel tank. Remove the air filter cover and engine housing. Remove the fuel tank and ignition module cover. Disconnect the wires and take the screws out of the ignition module. Remove and dispose of the module. Install the new module and reconnect the wires. Reverse the process to reassemble the blower.This ignition module is sold as an individual unit. It does not come with screws. This module is designed for use in blowers manufactured by MTD, Craftsman, and Troy-Bilt. This is an authentic OEM part sourced directly from the manufacturer.

The ignition coil replacement module assembly is used in lawn trimmers. It creates charges of high pulses of electric current. The ignition coil's current sends the voltages down the spark plug wire to the spark plug and then the engine. Signs the ignition coil may need replacing include poor performance, inability to engage the machine, and unusual noises. An ignition coil will wear out with routine use, or it can become damaged with improper usage. Replacing the ignition coil in a trimmer requires a screwdriver, socket set, adjustable wrench, and star bit screwdriver. Allow the engine to cool completely before disassembly. It can be achieved in about 30 minutes. Wear gloves for safety. Make notations of all removed pieces for easier reassembly after the replacement part has been installed.This replacement module is an authentic OEM part sourced from the manufacturer. It is compatible with several different lawn equipment brands, including MTD, Cub Cadet, and Troy-Built. The module is found in numerous trimmer machines. The replacement part is sold individually as one module assembly. Included with the assembly are the screws, spark plug boot, and rubber insulated wire. The piece is made from durable plastic and metal.

This is an ignition coil module assembly found in many string trimmers. Also known as an armature-magneto, the module assembly is responsible for creating current for the ignition system. It does this by sending high voltage pulses the spark plugs. If the ignition coil module assembly starts to go bad, engine performance can drop. It may also require more fuel to use the string trimmer. If the part does not provide sufficient power, the trimmer may not power on.An ignition tester can be used to determine whether the ignition coil module assembly will need to be replaced. If it is damaged or broken and needs to be replaced, make sure to wear work gloves and disconnect the spark plug wire before doing so. The starter assembly will need to be removed from the trimmer. Take out the component and replace it with a new one before reassembling all of the other parts.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The ignition coil module assembly is made to be used with string trimmers manufactured by Bolen, Craftsman, MTD, and Yard Machines.

This part is a replacement ignition coil. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective ignition coil in cultivators.Ignition coils are important for powering the cultivator as they generate the voltage that travels to the equipment's spark plugs. If the ignition coil is faulty, the cultivator may have decreased power or may not work at all, thus this part may need to be replaced. Disconnect the spark plug wire before installing the ignition coil. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this ignition coil, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This ignition coil can be used with different models of cultivators that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Sold individually.

This is a replacement module kit for use with gas trimmers. The module is an essential part of the machine since it produces the voltage that travels from the spark plug wire to the plug and then to the engine. If the module is going bad, it will be difficult or even impossible to get the trimmer started. Check the module and replace it if needed.The module is made from metal and plastic. It is usually a long-lasting piece, but it could still need to be replaced. It might be faulty and stop working, or it could be damaged. Regardless of the reason, owners will want to make a replacement. They will need to have a screwdriver, socket wrench, and a pair of pliers to help with the repair. They should wait until the engine is completely cool before starting the repair.This module is compatible with models of trimmers from Craftsman and MTD. The part is sold individually, and it is a genuine OEM replacement part.

This ignition coil is a genuine MTD part, sold individually. A ignition coil can be used as a replacement part in a tiller or a log splitter. The purpose of this genuine OEM part for one of these outdoor appliances is to power the engine.The ignition coil in a outdoor appliance might need to be replaced at any point within the typical lifespan of the appliance. This could occur if the ignition coil assembly has been damaged, in which case it should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This ignition coil is compatible with the following outdoor appliance brands: MTD, Yard Machines, Huskee, and Bolens.