Mtd Latch

This is a chute flange keeper that is commonly used on snowblowers. It is black and made of durable plastic. The purpose of the chute flange keeper is to ensure the chute can properly rotate along with the chute adapter. The chute flange keeper is connected to the flange on the chute. There are typically three chute flange keepers on a snowblower.If a chute flange keeper is damaged, broken, or missing, it will need to be replaced. A screwdriver and work gloves will be needed to handle the job. A screwdriver can be inserted into the equipment to pry off the old chute flange keeper. Put the new flange keeper in place and force it into position using vice grips. Users can also snap in one end and use a pair of pliers to get the other side to fit. Reassemble all parts before using the tool again.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The chute flange keeper is designed for use with snowblowers manufactured by Yard-Man, Huskee, MTD, Yard Machines, Troy-Bilt, Cub Cadet, and Craftsman.

Snowblowers are equipped with a trigger that allows the user to direct the snowblower on a path to the left or the right while plowing. With regular use of the equipment, the trigger can wear out, loosen, or become damaged. When the trigger is not working correctly, the operator will have no control over which direction the machine goes, which can pose a safety risk and cause poor performance. Signs that the trigger in the snowblower is beginning to wear down or is already damaged are a lack of resistance when applying pressure or no response from the snowblower when the trigger is directed in either direction.The trigger replacement can be done quickly and easily with a pair of pliers. The process includes removing the pin where the existing trigger is. Install the new part in the place of the old one. Re-insert the pin. The entire process takes less than 15 minutes.This is a genuine OEM MTD trigger for various snow blowers model types. It is compatible with many different brands of snow machines, including Craftsman and Troy-Bilt. The part is sold individually. Each trigger is made of durable red plastic.

This choke control lever automatically regulates the combined amount of air and fuel that come together in a small gasoline powered engine's carburetor to give a cold engine a fuel-rich mixture when the motor is first started. The control lever has several positions that allow it to adjust the fuel/air mixture in lawn equipment such as lawn mowers, snow blowers, tillers, chippers, log splitters, and other small gas engines. Over time with regular use, the control lever may become worn and must be replaced. There are several signs that indicate a choke control lever may be failing. If the gas tank is full of fresh gasoline but the engine refuses to start, if the engine starts and quickly floods, or if the engine runs at top speed but does not idle, the choke control level may be need to be replaced. Should the choke control lever need to be replaced, it is essential to use an OEM genuine manufactured replacement part such as this one. OEM parts are built to the exact specifications of the equipment's original parts. This part is compatible with Huskee, Cub Cadet, Yard Man, MTD, Yard Machines, and Troy-Bilt brand equipment.

This is a genuine adjustment lever assembly that is made for use in select models of edgers. The adjustment lever assembly is a durable metal part that is designed to help adjust the height of the unit. This part is used frequently and it can be subject to damage from repetitive motion or other impacts. It could also become dented or otherwise broken, necessitating a repair or replacement. Typically, this OEM adjustment lever assembly is going to resolve the issue by offering an exact replacement. It is compatible with machines from MTD, Troy-Bilt, Yard Man, and Cub Cadet and will have different applications depending on the appliance in question. Owners should refer to the parts diagram for exact placement when replacing this lever assembly. This part will require a screwdriver and a wrench set to replace. It will be important to disconnect the power and wear gloves in order to perform this repair. Always allow the unit to cool before performing any work, as well. This assembly is sold individually and does not include hardware or additional components.

This is a choke control replacement part that is used in lawn and garden equipment. It is an attachment to the throttle box. The choke control helps ensure the choke lever is actuated so the carburetor can take advantage of a richer ratio of air and fuel when the motor is started. It is made of durable plastic and metal.If the choke control has become damaged or broken, either through frequent use or impact with other items, it will need to be replaced. A screwdriver may be needed for the replacement. The equipment should be placed on a stable surface with the spark plug wire disconnected. The top cover can be removed before taking out the recoil assembly. Once that is complete, the existing choke control can be removed using the screwdriver. Replace the part and reinstall the other components before use.This choke control is a genuine OEM product sourced directly from the manufacturer. It is sold as an individual component. The part is designed to be used in wood chippers and log splitters manufactured by MTD and Cub Cadet.