Parts for Lg WT7300CV/00: Outer Case Assy Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This damper controls airflow into the refrigerator compartment to maintain even temperatures and proper cooling. Replaces a worn or stuck damper to help restore correct air distribution and reduce temperature swings. What it does:

• Opens and closes the air inlet to regulate cold air from the freezer into the fridge compartment
• Helps maintain even temperatures and prevents sections from becoming too warm or too cold
• Commonly replaced when damper is stuck, noisy, or not responding and fridge temperatures fluctuate
• Works with the fridge's control system to modulate airflow as needed

• One damper assembly

• Disconnect power before beginning any repair to avoid electrical shock
• Access typically requires removing interior panels or trim in the refrigerator compartment; keep fasteners organized
• Verify actuator orientation and proper linkage engagement before reassembly

This rear panel replaces the damaged or missing back cover on compatible LG appliances to protect internal components and restore the cabinet enclosure. It helps prevent dust, debris, and accidental contact with wiring while keeping the appliance looking complete. What it does:

• Covers and protects internal components at the rear of the appliance.
• Restores structural enclosure to reduce vibration and rattling.
• Prevents dust, pet hair, and foreign objects from entering the chassis.
• Reduces risk of accidental contact with electrical components and wiring.

• One rear panel

• Disconnect power (unplug or shut off breaker) before starting any work.
• Remove mounting screws from the old panel; handle edges carefully—metal edges may be sharp.
• Reuse original screws and grounding hardware unless replacement fasteners are provided; ensure panel is secured flush to the cabinet.

Replacement mounting bracket that secures internal washer components in position. Needed when original bracket is cracked, broken, or loose causing parts to shift.

The Pulsator Cap is an OEM part for LG washing machines. It is designed to secure the pulsator (or agitator) in place, ensuring proper movement of the wash plate during the wash cycle. This component helps in the effective distribution of water and detergent, promoting thorough cleaning of clothes.

You should replace this pulsator cap if it becomes damaged, lost, or worn out. Causes of a bad pulsator cap can include regular wear and tear, exposure to heavy loads, or damage from improper handling. A compromised cap can lead to inefficient washing and potential damage to the pulsator.

Symptoms of a bad Pulsator Cap include:

• The pulsator becoming loose or dislodged
• Unusual noises during the wash cycle
• Clothes not being cleaned properly
• The washer experiencing imbalance issues

This OEM LG part is also compatible with Sears/Kenmore models.

Washer holder assembly that secures internal components in place. Replace if the original holder is cracked, broken, or missing to restore proper fit.

Complete top-load washer lid assembly that replaces cracked or damaged lids. Restores proper closing and sealing. Verify fit with your model number.

Lower outer panel that supports and finishes the bottom of your washer cabinet. Replace if cracked, dented, or missing to restore structural integrity.

The Customized Screw is an OEM part for securing the wash plate in LG washing machines. This screw maintains the wash plate's position and stability during the washer's operation. The Customized Screw ensures the wash plate performs efficiently, contributing to the effectiveness of the washing process by enabling proper agitation and circulation of clothes.

Causes of a bad Customized Screw can include wear and tear over time, especially from the constant motion and stress during the wash cycles.  

Symptoms of a bad Customized Screw include:

• The wash plate becoming loose or detached
• Ineffective washing due to improper motion of the wash plate
• Unusual noises during the wash cycle indicating a loose component

This OEM LG part is also compatible with some Kenmore models.

This damper controls airflow between compartments to help maintain consistent temperatures and efficient cooling. It replaces a worn or failed damper to restore proper air distribution and reduce temperature swings. What it does:

• Regulates airflow between freezer and fresh-food compartments for balanced temperatures
• Can cause uneven cooling or warm fresh-food compartment when faulty
• May click, stick, or fail to open/close if broken or obstructed
• Works with the refrigerator's control system to adjust airflow based on settings

• Disconnect power before beginning any service to avoid electric shock
• Handle the damper and housing carefully to avoid damage to plastic fins or linkage
• Note orientation and actuator connection before removal to ensure correct reassembly
• Test operation after reinstalling by restoring power and cycling temperature controls

Adjustable leveling leg that supports your washer and allows height adjustment. Replace if damaged, stripped, or missing to restore stability on uneven floors.

Hardware washer that sits beneath screws or nuts to distribute load and secure fasteners. Replace if bent, missing, or worn to restore proper fit.

Replacement mounting bracket holder that secures internal washer components. Needed when your original bracket is cracked, broken, or missing.

Genuine hardware washer that distributes fastener load at assembly joints. Replace if worn, cracked, or causing loose connections. Confirm fit with your model.

Balance assembly for washers. Mounts inside the tub to stabilize drum rotation during spin cycles. Replace if cracked, broken, or missing components.

Fix a washer that won't start, stops mid-cycle, or shows error codes with this main control board. Controls all wash functions and cycles. Pre-programmed.

Washer gasket creates a watertight seal to prevent leaks. Replace if you notice water pooling or dripping during cycles. Confirm fit with your model.

Water won't drain from washer tub or strange draining noise? Replace the drain pump assembly. Moderate DIY repair with basic tools in about 1 hour.

Fix washer leaking from drain or water pooling under machine with this drain hose connector. Simple DIY repair takes 15-30 minutes with basic tools.

Outer cabinet panel that covers the washer's upper surface. Replaces cracked, dented, or corroded tops. Restores finished appearance and protects components.

This is a factory replacement parts assembly designed to restore proper fit and function of a specific component group in your appliance. Use it to replace a worn, damaged, or missing original assembly and maintain reliable operation. What it does:

• Provides a complete, preassembled component group specified by the manufacturer
• Restores proper alignment, support, and operation of the associated parts
• Helps resolve issues like looseness, rattling, misalignment, or intermittent function
• Direct-fit replacement engineered to match the original design

• One parts assembly

• Disconnect power (and shut off water or gas, if applicable) before servicing
• Refer to your model's service documentation for the exact location and procedure
• Handle sharp edges and components carefully; wear cut-resistant gloves
• Verify correct operation before final reassembly

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Replace your washer's control panel housing case if cracked, broken, or damaged. This protective cover secures and shields internal components.

Replace your washer's guide cover if it's cracked, broken, or missing. This cover protects the internal guide mechanism and maintains proper operation.

Fix DL error code or washer that won't start with this lid switch and lock assembly. DIY repair in about 20 minutes with basic tools and video guide.

Connects the washer tub to the drain pump. Replace this hose if cracked, split, leaking, or worn from age. Ensures proper water drainage during cycles.

Secures internal components to the washer frame. Replace if your bracket is cracked, rusted, broken, or missing to restore stable support and alignment.

Secures internal washer components in proper alignment. Replace this mounting bracket if cracked, rusted, broken, or missing to restore stability.

Detergent dispenser box assembly for front-load washers. Replaces cracked, broken, or missing dispenser housing. Installs in control panel area.

Replace your washer's detergent dispenser box if it's cracked, broken, or missing. This box holds and dispenses detergent during wash cycles.

Fix a leaking or cracked fabric softener dispenser with this washer softener cap. Easy DIY repair with no tools needed—just remove and replace in minutes.

Fix fabric softener leaking or not dispensing with this washer dispenser cap. Seals the reservoir and directs softener flow during the wash cycle.

Replace a cracked or clogged washer nozzle assembly to restore proper water flow and prevent poor cleaning performance. Moderate DIY repair.

Fix a washer that won't spin or agitate with this clutch coupling & housing assembly. Links the motor to drive components for proper drum rotation.

Fix a washer that won't fill, leaks underneath, or drips constantly with this water inlet valve. Controls water flow into the drum. Easy DIY repair.

Connects water inlet valve to tub in your washer. Replace if cracked, leaking, or ports are stripped. Ensures secure, leak-proof connection during cycles.

Leaking water behind your washer? A cracked inlet hose is often the culprit. This hose channels water from your supply line into the machine during fill.

Fix detergent leaks or dispenser jams with this washer detergent housing assembly. Routes detergent properly and replaces cracked or warped housings.

Fixes washer drum not spinning or spinning intermittently. The stator assembly powers the motor that rotates the wash basket. Moderate difficulty repair.

Fix washer overfilling or not filling issues with a water level pressure switch replacement. Common repair for PE error codes. Takes 10-20 minutes to install.

Washer won't spin or agitate? This rotor assembly forms the rotating half of the direct-drive motor, restoring basket movement when worn or stripped.

Fix washer overfilling or not filling issues with a water level pressure switch replacement. Common repair for PE error codes. Takes 10-20 minutes to install.

Standard bolt for securing washer panels, brackets, and internal components. Replace when bolt is stripped, missing, or damaged to restore proper fit.

The Power Cord Assembly is an OEM part for LG washing machines. It allows the washer to receive power from the wall outlet during operation. The power cord assembly consists of the wiring that transmits electricity from the power source and into the washer's electrical control panel. 

Causes of a bad power cord assembly can include fraying of the insulation over time, cracks or breaks in the wiring, or loose connections that disrupt the flow of electricity. 

Symptoms of a bad power cord assembly include:

• The washer not receiving power and failing to turn on
• Buzzing or humming noises coming from the power cord area  
• Tripped breakers or blown fuses
• Shock or electrical hazards 

This OEM LG part is also compatible with Sears/Kenmore. Replacing a damaged or defective power cord assembly prevents electrical issues and unsafe conditions. 

Fix E6 error codes and loud ratcheting sounds during wash or spin cycles. This washer motor assembly drives drum rotation for proper cleaning.

Fix washer control issues, intermittent power, or unresponsive buttons with this multi-connector wiring harness. Restores reliable connections.

The Noise Filter is an OEM part for LG Washers. This part is responsible for reducing electrical noise and interference from the incoming power supply. It filters out unwanted electrical signals and prevents them from affecting the performance of your washing machine. It helps to maintain a stable power supply, minimizing the risk of electrical disruptions during the wash cycle.

A bad Noise Filter can occur due to power surges, electrical faults, or general wear and tear over time. If the noise filter board becomes faulty, you may experience issues such as excessive electrical noise, interference, or even complete power failure.

Symptoms of a bad Noise Filter include:

• Loud electrical buzzing or humming noises during operation.
• Random power fluctuations or interruptions.
• Inconsistent or erratic behavior of the washing machine controls.

If you're experiencing any of these issues, it's time to replace the Noise Filter with this genuine LG part to restore the electrical stability and performance of your washing machine. This OEM LG part can also be used on Kenmore/Sears appliances.
 

Fix washer not starting or intermittent operation with this multi wiring harness. Restores electrical connections between control and components.

Secures brackets, panels, and fasteners inside your washer. Replace this nut if worn, missing, or stripped to restore tight connections and eliminate rattling.

Kit is no longer available. Order MCJ61861201 and ACP72929002 separately.

The Coupling Washer is a genuine OEM part for LG washing machines. As a crucial component connecting the drive motor to the inner drum, the coupling washer allows for the transmission of rotational force during the spin cycle. This rotational movement generated by the drive motor is what extracts water from clothing, effectively drying clothes. 

Symptoms of a bad coupling washer include:

• The washing machine fails to spin or rotates very slowly
• Vibrations and noise during spinning
• Rubber couplings tearing or shredding prematurely

Over time, the constant exposure to vibrations and forces during spin cycles can cause the rubber material of the coupling washer to deteriorate. 

This OEM LG part is also compatible with Sears/Kenmore washers.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.