Kenmore Washer 110.47788800 (11047788800, 110 47788800) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10135699
The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.
This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10730972
The Water Pump is an OEM replacement part for Whirlpool washing machines. It plays a key pump function by introducing water into the wash tub. Proper water circulation is necessary for effective cleaning.
Symptoms of a faulty pump include:
- Slow or no water filling during wash cycles
- Water leaks or drips due to cracked pump housing
- Loud grinding or knocking noises during operation
- Error codes for water fill related issues
Causes of pump failure can be due to regular usage over time, mineral buildup inhibiting flow inside the pump, or cracks developing in the plastic housing exposing internal components to corrosion.
This OEM Whirlpool replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
This part fixes the following symptoms
-
Will not drain
-
Noisy
-
Burning smell
-
Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You
Loud noise when washer was in a drain cycle Robert G. • Clayton , NC • January 03, 2016
There was a loud noise from my washer during the drain cycle. (The washer seemed to drain just fine.) It was pretty easy to determine that the noise was coming from the drain pump. (Which for my washer is behind the front lower inspection panel on the right side front.) I inspected the outside of the pump for any physical damage and verified no issues with the pump or the mounts. Everything seemed ok. I then checked the drain pump filter(You will need something to catch water if you do...
Read more
More
$108.65
- Compare At:
-
$155.00
- You Save:
-
$46.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8182119
The Bellow Tub Seal is an OEM part for Whirlpool washing machines. This part acts as a flexible seal between the door and the drum of front-loading washers, preventing water from leaking out during operation. Note: The clamps do not come with the seal. For clamps order W10902779 and WP8182210
Causes of damage to the bellow tub seal often include regular wear and tear from frequent use, the buildup of detergents and chemicals that can degrade the material over time, and physical damage from overloading or from objects caught between the door and the drum.
Symptoms of a bad Bellow Tub Seal include:
- Visible cracks, holes, or tears in the bellow
- The accumulation of mold or mildew
- Water leakage from the front of the machine
- Clothes getting caught or snagged in the damaged areas of the bellow
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Water leak due to torn bellow tub seal. Christopher R. • Bryn Mawr , PA • November 09, 2018
Luckily we planned ahead when building the laundry room, as we built a water catch basin and drain under the washer, but waking up to see 1-2 inches of water is never a good sign - even if it is contained.
It appears that a sleeve of a shirt was accidentally caught between the door mechanism and the bellow seal. After a few hundred revolutions in the washer, the shirt knotted up and was torn free of its pinch - in doing so, it tore a quarter sized hole in the rubber bellow seal. This was,...
Read more
More
$119.62
- Compare At:
-
$163.91
- You Save:
-
$44.29
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8183202
The Door Hinge is an OEM part for Whirlpool washing machines. This hinge attaches the door to the washing machine, allowing it to open and close smoothly while maintaining proper alignment.
You should replace the door hinge if it becomes damaged or worn out. Common causes of a bad door hinge include wear and tear from frequent use, rust or corrosion, or physical damage from accidental impacts or excessive force.
Symptoms of a bad door hinge include:
- Difficulty opening or closing the washer door
- The door not sealing properly, leading to leaks
- A sagging or misaligned door
- Unusual noises when the door is moved
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Lid or door won't close
-
Lid or door will not open
See more...
Do-It-Yourself Stories from Customers like You
Broken washer hinge Frank H. • Scottsdale , AZ • February 04, 2017
I watched the AppliancePartsPros.com video on the part and replaced the hinge according to the video. Nothing could be easier.
Read more
More
$103.95
- Compare At:
-
$139.45
- You Save:
-
$35.50
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10253483
The Door Latch Assembly is an OEM part for Whirlpool washing machines. It is designed to secure the washer door during operation, ensuring it remains closed and locked. This assembly is crucial for the safe and effective operation of the washing machine, preventing the door from opening mid-cycle, which could result in water leaks and interruptions.
You should replace the door latch assembly if it becomes faulty. Causes of a bad door latch assembly can include regular wear and tear, damage from forceful closing or opening, or electrical issues within the latch mechanism. A malfunctioning door latch can prevent the washer from operating correctly.
Symptoms of a bad door latch assembly include:
- The washer door not latching or locking properly
- The washing machine not starting or stopping mid-cycle
- Error codes related to door lock issues
- Difficulty in opening or closing the door
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Lid or door will not open
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Whirlpool duet washer kept stopping at random times with no error codes Joseph L. • Hawthorne , CA • April 17, 2015
Did lots of internet research. Narrowed problem down to three things - door lock latch, control unit, and motor control unit. Figured out how to run the diagnostic test program, which showed a F22 (door lock) error. Removed and ohm tested the door lock (pins 1 & 3). Found door lock latch to be defective. ordered new one and installed it. YouTube video helped a lot. https://www.youtube.com/watch?v=_SjU6k5bpSs So far, so good. Have only done a few loads. New door lock latch tested fine.
Read more
More
$133.28
- Compare At:
-
$157.27
- You Save:
-
$23.99
Genuine Whirlpool part
By: Whirlpool
Part Number: W10822553
The Shock Absorber is an OEM part designed for Whirlpool washing machines. This part helps to dampen the motion of the tub during the spin cycle, reducing vibrations and noise. By absorbing the energy produced during operation, the shock absorber contributes to the stability and longevity of the machine. A well-functioning set of shock absorbers is essential for maintaining the washer's performance and preventing damage to other components.
Causes of a bad shock absorber can include wear and tear from regular use, excessive load sizes or unbalanced loads, and structural damage from moving or improper handling.
Symptoms of a bad Shock Absorber include:
- Increased vibration and noise during the spin cycle
- The washer moving or "walking" across the floor
- Unusual wear on other components due to excessive movement
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Our whirlpool duet washer was very noisy during spin cycles Linda M. • Kiel , WI • September 25, 2014
We looked online at AppliancePartsPros.com under the symptoms and found it was most likely caused by the shocks. Of course there was a repair video showing how to replace all four shocks step by step, and there was a link for purchasing the four shocks at the bottom of the video. Our repair didn't go quite as quickly as on the video because we are novices, but we were able to do the repair ourselves and, once again, saved ourselves a ton of money! Now we have a very quiet washer and dryer again...
Read more
More
$53.27
- Compare At:
-
$63.92
- You Save:
-
$10.65
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10110225
The Water Inlet Flow Meter is an OEM part for Whirlpool washing machines. It is responsible for monitoring and regulating the flow of water entering the washing machine during the fill cycle, ensuring the correct amount of water is added for efficient and effective cleaning.
Causes of a faulty Water Inlet Flow Meter include sediment buildup, physical damage, or electrical issues with the meter's sensors or connections.
Symptoms of a bad Water Inlet Flow Meter include:
- Incorrect water levels in the wash tub
- Washing machine not filling properly with water
- Error codes related to water inlet flow or water level issues
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Will not fill with water
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
Unnoticed leak until i removed the top of my front end washer George V. • Homestead , FL • January 03, 2015
This should be plastered all over the place and every owner of a front end washer should be advised or a recall should be issued about this. As I opened the top of my washer to fix a F35 error by replacing the water level switch, which worked out great and it fixed the issue, I noticed a rusting spot at the bottom of the washer just under where the motor is placed. After running the washer with the lid open (I don't recommend doing that) I noticed that it was coming from the top of the soap...
Read more
More
$76.95
- Compare At:
-
$92.34
- You Save:
-
$15.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10388414
The Drive Belt is an OEM part for Whirlpool front load washing machines. It transmits power from the wash motor to rotate the tub assembly, tumbling clothes during cycles. The belt is designed with deep grooves to securely grip the motor and tub pulleys. It measures 48.22” long uninstalled and will stretch to 51.53” when installed.
Causes of a bad Drive Belt can include cracks developing from repeated flexing during operation or stretching over many years. Debris trapped in the belt path can also wear down the belt prematurely.
Symptoms of a bad belt include:
- The washing tub failing to spin or agitate clothes
- Abnormally loud squealing noises from inside the machine
- The belt slipping off pulleys during cycles
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, and select Kenmore front load washers.
This part fixes the following symptoms
-
Burning smell
-
Will not agitate
-
Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You
Drum not turning Paul H. • Seattle , WA • December 13, 2019
I pulled the unit away from the wall and noticed black dust on the floor. Unplugged the unit, turned off the water. Removed back panel (about 10 screws with Torx heads) and noticed the belt was off, the drive pulley was loose and wobbling on the shaft, black dust all over the inside. Belt was worn along one side. Some grooves/damage in the outer drum casing around the pulley where it appeared the belt had rubbed. Removed the lower crossbar (2 more screws) to get better access to the drive...
Read more
More
$55.95
- Compare At:
-
$66.58
- You Save:
-
$10.63
Genuine Whirlpool part
By: Whirlpool
Part Number: W10902779
The Boot Seal Retaining Ring is an OEM part for Whirlpool washing machines. This ring ensures the boot seal is securely fastened to the washing machine's door assembly. The boot seal retaining ring plays a key role in preventing water leaks by maintaining a tight seal between the door and the drum of the machine.
Over time, the retaining ring can lose its tension, become bent, or suffer from corrosion, leading to a compromised seal.
Symptoms of a bad Boot Seal Retaining Ring include:
- Visible water leakage around the washer door
- Difficulty closing the washer door securely
- A visible gap or misalignment between the boot seal and the door frame
- The boot seal coming loose or falling off
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The bellow tub seal ripped and leaked water all over the laundry room floor James S. • Moscow , TN • September 28, 2014
I used a directional video from AppliancePartsPros specifically made for my specific clothes washer. It made the repair quite simple.
Read more
More
$23.95
- Compare At:
-
$28.50
- You Save:
-
$4.55
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10352973
The Dispenser Actuator is an OEM part for Whirlpool washing machines. It is responsible for controlling the release of detergent and fabric softener during the wash cycle, ensuring that these cleaning agents are dispensed at the correct times.
Causes of a bad dispenser actuator can include wear and tear over time, damage from detergent residue build-up, or electrical faults within the actuator mechanism. If the actuator fails, it can disrupt the washing cycle and prevent proper dispensing of cleaning agents.
Symptoms of a bad dispenser actuator include:
- Detergent or fabric softener not being dispensed
- The washer displaying error codes related to the dispenser
- Intermittent or inconsistent dispensing
- Unusual noises during the dispensing phase
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
F8 e2 error maytag maxima front load washer Christopher A. • Azle , TX • May 26, 2018
After watching the YouTube video provided by Appliancepartspros and checking various forums I determined the dispenser motor had gone out. Turns out, it was a two part problem. The connectors to the motor, and the motor had corroded. Cleaned them both with vinegar. The old motor did a load before I started having problems with the CCU. I didn't learn about the CCU needing a reset under the quick diagnostics until after replacing the motor and the new part doing the same thing. Both the new...
Read more
More
$94.28
- Compare At:
-
$111.25
- You Save:
-
$16.97
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8182210
The Bellow Seal Clamp Ring is an OEM part for Whirlpool washing machines. This ring secures the bellow seal, which is a flexible gasket that provides a watertight seal between the washer door and the drum.
You should replace the bellow seal clamp ring if it becomes damaged or loses its ability to hold the seal tightly. This can occur due to wear and tear, frequent door use, or improper installation. A compromised clamp ring can lead to leaks and inefficient washer operation.
Symptoms of a bad bellow seal clamp ring include:
- Water leaking from the door area during washing
- The bellow seal coming loose or out of place
- Difficulty in keeping the washer door sealed properly
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The bellow tub seal ripped and leaked water all over the laundry room floor James S. • Moscow , TN • September 28, 2014
I used a directional video from AppliancePartsPros specifically made for my specific clothes washer. It made the repair quite simple.
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10467168
The Hose is an OEM part for Whirlpool washing machines. This hose is responsible for carrying water to and from the washing machine during the wash and rinse cycles. It is designed to withstand the pressure and temperature changes associated with the washing process, ensuring a reliable and leak-free connection. IF WASHER HAS AN ECO BALL, THE BALL IS NOT NEEDED AND MUST BE DISCARDED WHEN THE NEW HOSE IS INSTALLED.
Over time, hoses can degrade due to wear and tear, exposure to harsh water conditions, or repeated bending and flexing. Additionally, damage from accidental mishandling or improper installation can also cause hose failure.
Symptoms of a bad hose include:
- Leaks or puddles of water around the washing machine
- Reduced water flow or pressure
- Visible cracks, bulges, or wear on the hose
- Error codes related to water supply issues
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Drain pump and tub to drain pump replacement (error code sud washer not draining) Monty M. • Tooele , UT • August 08, 2016
Repairing the problem was the easy part. Diagnosing the problem took a little more time. To diagnose the problem, it took longer because I first cleaned the Drain Pump trap from all the material it collected. Socks, hair pins, and other materials that were not cleaned from pants pockets. It then still did not drain. Repeated the process after finding more materials and a toy that punctured the hose between the tub and the drain pump. Running the drain and spin cycle takes about 11...
Read more
More
$34.52
- Compare At:
-
$41.08
- You Save:
-
$6.56
Genuine Whirlpool part
By: Whirlpool
Part Number: W10135004
The Suspension Spring Kit is an OEM part for Whirlpool washing machines, designed to maintain balance and stability during the wash cycle. This kit includes 2 springs that work together to support the tub assembly, allowing for smooth operation and reducing vibrations and noise.
Causes of a bad Suspension Spring Kit can include normal wear and tear from repeated use, overload of the washing machine which can stretch or damage the springs, and corrosion due to exposure to water and detergents.
Symptoms of a bad Suspension Spring Kit include:
- Excessive shaking or vibrating of the washing machine, especially during spin cycles
- Unusual noises such as banging or thumping when the tub moves
- The washing machine "walking" or moving from its original position
- Difficulty in keeping the wash load balanced
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Whirpool duet 10 years old drum would make a rocous during spin cycle Jose F. • Pflugerville , TX • December 06, 2014
Ordered the springs and shocks. Noticed that the washer had placement for 4 springs, but the factory only installs 2 (or they forgot to install the other two on my machine).
If you replace the springs, be sure to check for the spring bracket mount. You will also need those.
The washer is running fine. Next I'll work on the dryer.
Read more
More
$44.95
- Compare At:
-
$53.49
- You Save:
-
$8.54
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10488048
The Door Strike is an OEM part for Whirlpool washing machines. This component engages with the door latch to securely close the washing machine door. Ensuring a tight seal, the door strike plays a pivotal role in the appliance's safety mechanisms, preventing the washer from operating if the door is not properly shut.
Causes for replacement often stem from physical damage, such as breaking or bending due to forceful closing of the door, normal wear and tear, or manufacturing defects that prevent the door from latching correctly.
Symptoms of a bad Door Strike include:
- The washing machine door won't latch or lock properly.
- The washer fails to start due to the door not being recognized as closed.
- Visible damage or wear to the strike, indicating it may not engage correctly with the latch.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
My son slammed the door to the washer closed and broke the striker latch Vernon S. • Harbor City , CA • June 02, 2014
Ordered the striker latch, it arrieved in two days, I removed the two screws holding the broken latch and installed the new latch, then put the two screws back in. Wam Bam, it was fixed, it was easy.
Read more
More
$10.43
- Compare At:
-
$12.41
- You Save:
-
$1.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP596669
The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.
Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
- Leaks at the hose connection points
- Hoses slipping off the connections
- Visible rust or damage on the clamp
- Reduced appliance efficiency due to leaks
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Will not stop filling with water
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
My washing machine smelt horrible Bryan W. • Ogdensburg , NY • August 20, 2018
First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available....
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10003250
The Drain Hose is an OEM replacement part for Whirlpool washing machines. Replacements are typically needed due to compression fatigue caused by years of absorbing hydraulic pounding. Additionally, mineral buildup within hoses can reduce drainage efficiency over time.
Symptoms involve:
- Remaining water pockets not fully evacuating after rinses
- Premature alerts about blocked pumps requiring inspection
- Damp loading areas traced to splits along pressure-prone locations
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
F02 fail to drain repeated suds warnings John C. • Eagle River , AK • February 18, 2019
Prior to ordering parts I had pulled the pump strainer basket and cleaned it out. There was both soft and hard scale build up. The tub-to-pump hose was also pretty crusty/slimey. Still got warnings for SUDS and repeated F02 errors. Ordered parts and replaced the pump, tub-to-pump hose, interior drain hose and exterior drain hose (both hoses has some slime build up). The water standing in the tub when I emptied it the first time had very little suds but we kept getting the SUDS warning. ...
Read more
More
$36.62
- Compare At:
-
$43.58
- You Save:
-
$6.96