Kenmore Dryer 110.6617710 (1106617710, 110 6617710) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 349241T
The Dryer Rear Drum Support Roller Kit is an OEM replacement part for Whirlpool dryers, as well as Kenmore, Samsung and other brands. This kit includes the rear support rollers that are crucial for maintaining proper drum alignment and smooth rotation during the drying cycle. Matching belt 341241 and idler pulley WP691366.
Symptoms of a faulty Rear Drum Support Roller Kit include:
- Excessive vibration or shaking during drying cycles
- Loud grinding or squeaking noises from the rear of the dryer
- Uneven wear or visible damage to the rollers
- Potential drum misalignment, rubbing against the drum casing, or leaks
Causes of a bad Rear Drum Support Roller Kit can include wear and tear over time, excessive load imbalances, or physical damage from impact or mishandling.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.
Do-It-Yourself Stories from Customers like You
Thumping/vibrating/rattling pretty bad fixed 100%! Doug P. • Durham , NC • November 15, 2015
I am very glad to find the AppliancePartsPros.com website! Their instructional videos and easy parts reference made all the difference. I had originally planned to have someone come to fix my dryer, but no one was available for at least a week. I checked out their site, and after watching the videos I felt confident I could repair my appliance. I determined that a drum roller wheel had gone bad. Apparently it was going bad over the last five years since the dryer always seemed to rattle a...
Read more
More
$17.74
- Compare At:
-
$21.29
- You Save:
-
$3.55
Genuine Whirlpool part
By: Whirlpool
Part Number: WP691366
The Idler Pulley is an OEM part for Whirlpool dryers, responsible for maintaining the correct tension on the drive belt, allowing it to remain tight and aligned, preventing slipping and contributing to the consistent rotation of the drum during cycles.
Symptoms of a bad Idler Pulley include:
- Squealing or squeaking noises
- The dryer drum failing to turn
- Excessive vibration or unusual sounds
Causes of failure can range from normal wear and tear, which can lead to the pulley's bearing wearing out, to the accumulation of lint and debris causing the pulley to seize or function improperly. Additionally, a cracked or damaged pulley can lead to belt misalignment and slippage.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Fits all Whirlpool-made dryers (Whirlpool, Kenmore with prefix 110, Roper, KitchenAid, and Estate). Matching belt 341241 and rear support rollers 349241T. Whirlpool dryer repair manual 677818L.
This part fixes the following symptoms
-
Will not tumble
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Thumping/vibrating/rattling pretty bad fixed 100%! Doug P. • Durham , NC • November 15, 2015
I am very glad to find the AppliancePartsPros.com website! Their instructional videos and easy parts reference made all the difference. I had originally planned to have someone come to fix my dryer, but no one was available for at least a week. I checked out their site, and after watching the videos I felt confident I could repair my appliance. I determined that a drum roller wheel had gone bad. Apparently it was going bad over the last five years since the dryer always seemed to rattle a...
Read more
More
$15.65
- Compare At:
-
$18.78
- You Save:
-
$3.13
Genuine Whirlpool part
By: Whirlpool
Part Number: 8009
Original Whirlpool light bulb, 40 watt.
Symptoms of needing to replace the light bulb include:
- Dimming or flickering light
- Complete lack of illumination inside the appliance
- Visible signs of damage or burnout on the bulb itself
Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.
Do-It-Yourself Stories from Customers like You
Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016
I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it...
Read more
More
$17.76
- Compare At:
-
$20.96
- You Save:
-
$3.20
Genuine Whirlpool part
By: Whirlpool
Part Number: 279827
The Dryer Drive Motor is an OEM part for Whirlpool dryers. This motor is the heart of the dryer, responsible for turning the drum and enabling the air to circulate properly throughout the machine.
Over time, dryer motors can suffer from wear and tear due to continuous use, accumulation of lint and debris, or overload from heavy laundry loads. These factors can lead to the motor overheating, losing power, or failing to start altogether.
Symptoms of a bad Dryer Drive Motor include:
- The dryer not starting when the start button is pressed
- Unusual noises, such as humming or buzzing
- The dryer stopping unexpectedly during cycles
- A burning smell coming from the dryer
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Will not tumble
-
Noisy
-
Shuts off too soon
See more...
Do-It-Yourself Stories from Customers like You
High pitched squeal: maybe a roller wheel maybe a bad felt bearing on drum maybe a rubbing fan wheel or just a burned out motor! Bruce K. • Pikeville , KY • September 06, 2014
My 12 year old Kenmore dryer problem started about 3 years ago with the motor just stopping.
My thing was:
I would turn it off and turn the drum by hand about halfway around and it would work again.
Last month, my wife said it stopped again and its making a loud noise,
but when I did "my thing" it still made a loud squealing noise (like I was killing a mouse).
I made time to work on it the next day, I took it apart, using the video instructions from AppliancePartsPros, I removed the top,...
Read more
More
$97.95
- Compare At:
-
$131.61
- You Save:
-
$33.66
Genuine Whirlpool part
By: Whirlpool
Part Number: 279570
The Door Latch Kit is an OEM replacement part for Whirlpool washers. This component is responsible for securely locking the washer door during the wash cycle, preventing it from opening unexpectedly and ensuring a safe and efficient operation.
Symptoms of needing to replace the door latch kit include:
- Difficulty in closing or latching the washer door
- Door opening unexpectedly during the wash cycle
- Leaks or water seeping due to an improper door seal
- Excessive wear or damage to the latch components
Causes of a faulty door latch kit can include normal wear and tear over time, physical damage due to impact or mishandling, or issues with the door alignment or strike plate.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.
This part fixes the following symptoms
-
Door won't close
-
Shuts off too soon
-
Doesn't shut off
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Dryer door latch worn out Kathy M. • San Diego , CA • February 22, 2015
When I looked up the part number there was a handy video that popped up. I watched the video and thought "how easy!" so, I ordered that part and waited. The next day, I thought I better start to take the door off of my dryer (because that's what the video instructed, and I wanted a head start) so as I was going into the garage to get my tools, my son came in with a small package. It was the part. That came, to quote another customer, "Crazy Fast!" All the way from Kentucky to California! ...
Read more
More
$6.95
- Compare At:
-
$13.85
- You Save:
-
$6.90
Genuine Whirlpool part
By: Whirlpool
Part Number: WP694089
The Blower Wheel is an OEM part for Whirlpool dryers. This component is crucial for the proper circulation of hot air within the dryer drum, ensuring efficient drying of clothes by directing airflow through the drum and out the exhaust.
Common causes of a bad blower wheel include accumulated lint and debris obstructing the wheel, physical damage from foreign objects, or general wear from prolonged use. A faulty blower wheel can significantly reduce drying efficiency and may cause the dryer to overheat.
Symptoms of a bad blower wheel include:
- Longer drying times for clothes
- Unusual noises during the drying cycle
- Overheating of the dryer
- Poor airflow from the dryer vent
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Will not tumble
-
Takes too long to dry
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Broken blower wheel on dryer Mark B. • Independence , WV • April 12, 2014
I FOUND the website on t internet, found my part ordered it and watched the how to video ,repaired the dryer myself. Awesome Website.
Read more
More
$33.48
- Compare At:
-
$39.84
- You Save:
-
$6.36
Genuine Whirlpool part
By: Whirlpool
Part Number: 339392V
The Lint Screen is an OEM part for Whirlpool dryers. This component is designed to trap lint and debris that are generated during the drying process, preventing them from accumulating in the dryer's vent system. By capturing lint, the screen helps maintain proper airflow, reducing the risk of fire hazards and ensuring that the dryer operates efficiently. This lint screen measures approximately 19 x 7 inches.
Symptoms of a failing Lint Screen include:
- Visible tears or holes in the screen mesh
- The screen not fitting securely in its slot
- Lint buildup in the dryer or vent system
- Clothes taking longer to dry due to restricted airflow
- The screen being difficult to remove or replace
Causes of a bad lint screen can include regular wear and tear from frequent use, physical damage from heavy lint loads or improper handling, and the accumulation of residue from dryer sheets or fabric softeners that can clog the mesh.
This OEM part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.
Do-It-Yourself Stories from Customers like You
Noisy & inefficient Richard M. • Indianapolis , IN • December 06, 2016
After having replaced the drum support rollers twice in a roughly 3yr period, I realized something wasn't quite right, and indeed it wasn't. I had been ordering the wrong parts - I did use the online parts locator after checking, & double checking my model number. Apparently my older Whirlpool dryer has a somewhat ambiguous model number because the rollers that were shipped each time looked nothing like the originals. I realize that is not particularily uncommon - manufacturers often modify...
Read more
More
$55.95
- Compare At:
-
$67.14
- You Save:
-
$11.19
Genuine Whirlpool part
By: Whirlpool
Part Number: W11415783
The Seal is an OEM part for Whirlpool dryers. This specific seal is designed to fit around the blower housing, ensuring a tight seal that prevents air leaks within the dryer. The blower housing is a critical component of the dryer's air circulation system, which moves air through the drum to dry clothes efficiently.
Causes of damage to the Seal can include wear and tear from regular use, excessive heat degrading the material over time, or improper maintenance practices that can cause physical damage to the seal.
Symptoms of a bad Seal include:
- Longer drying times than usual
- Excessive heat buildup in the dryer
- Unusual noises from the dryer, such as rattling or buzzing
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Gas dryer did not heat and excessive lint inside the unit James C. • New Boston , MI • July 20, 2017
Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered...
Read more
More
$16.75
- Compare At:
-
$19.93
- You Save:
-
$3.18
Genuine Whirlpool part
By: Whirlpool
Part Number: 239087
The Rear Dryer Drum Felt Seal with Adhesive is an OEM part for Whirlpool dryers. It forms a protective barrier along the rear opening of the dryer drum, preventing air leaks and absorbing sound-dampening vibrations.
Causes of a bad rear drum felt seal can include degradation of adhesives from heat cycling or poor drum surface bonding from bending stresses over time.
Symptoms of a bad rear dryer drum felt seal include:
- Reduced drying effectiveness and longer cycle times from air leaks
- Excessive noise emanating from around the rear drum seal area
- Flapping or loose seals allow air pathways to form
- Deterioration of the felt allowing lint and dust collection behind
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Noisy & inefficient Richard M. • Indianapolis , IN • December 06, 2016
After having replaced the drum support rollers twice in a roughly 3yr period, I realized something wasn't quite right, and indeed it wasn't. I had been ordering the wrong parts - I did use the online parts locator after checking, & double checking my model number. Apparently my older Whirlpool dryer has a somewhat ambiguous model number because the rollers that were shipped each time looked nothing like the originals. I realize that is not particularily uncommon - manufacturers often modify...
Read more
More
$41.95
- Compare At:
-
$58.24
- You Save:
-
$16.29
Genuine Whirlpool part
By: Whirlpool
Part Number: WP691581
The Door Switch Lever is an OEM part for Whirlpool dryers. It plays a vital role in ensuring the dryer only operates when the door is securely closed by engaging with the door switch to signal the door's status.
Causes of a bad door switch lever can include normal wear and tear from repeated use, physical damage from accidental impact, or deformation from heat and humidity inside the dryer. A faulty lever can prevent the dryer from starting or stopping correctly.
Symptoms of a bad door switch lever include:
- Dryer not starting
- Dryer stopping mid-cycle
- Door not latching properly
- The dryer continuing to run with the door open
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
The lever to the door switch broke. Valerie M. • Rochester , NH • April 02, 2014
First, I rooked on YouTube for a video on how to fix it. The video brought me to a very helpful video with a link to your website. We have had this dryer since we bought the house 10 years ago and the thought of buying something new, that wasn't made as well was a dreaded thought. I went on the website, entered the model number of my dryer and then a search link for a parts search. Not knowing the part number, I was able to find the exact thing I needed. It was amazing and so easy! Had...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP18776
The Top Lock is an OEM component for Whirlpool electric and gas dryers. It secures the outer metal cabinet door during drying cycles for safety and ventilation. This lock provides a method for releasing and latching the door tightly when shut.
Symptoms of a failing top lock may include:
- Inability to fully close or properly latch the dryer door
- Accidental opening from deficient locking during operation
- Difficulty manipulating the lock due to worn or broken parts
Causes related to normal wear of moving parts through frequent use over several years. Deformation from excessive exterior impacts could also damage locking mechanisms.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Clothes dryer drum stopped rotating Edward J. • Eclectic , AL • February 20, 2015
Located model number and went to Appliance Parts Pros.com to check the repair instructions on belt and motor. Used the suggestions to diagnose problem as a broken belt. I also ordered two top locks to replace the originals that were very brittle plastic that broke when I opened the dryer.
Ordered the parts on Presidents Day, and received the parts the next day. The dryer was back in service in 24 hours.
Read more
More
$12.51
- Compare At:
-
$14.76
- You Save:
-
$2.25
Genuine Whirlpool part
By: Whirlpool
Part Number: 279264
The Front Bearing and Seal Kit is an OEM replacement part for Whirlpool dryers. This kit includes the front bearing and seal for the dryer drum, which work together to provide smooth operation and prevent premature wear.
Causes of a bad front bearing and seal can include regular wear and tear from normal use, heavy loads that place extra strain on the bearings, or debris accumulation causing increased friction.
Symptoms of issues include:
- Noisy or grinding sounds coming from the drum area
- Vibration noticed during the operation
- Difficulty turning or rotating the dryer drum by hand
- Reduced efficiency and longer drying times
This OEM replacement kit is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Noisy & inefficient Richard M. • Indianapolis , IN • December 06, 2016
After having replaced the drum support rollers twice in a roughly 3yr period, I realized something wasn't quite right, and indeed it wasn't. I had been ordering the wrong parts - I did use the online parts locator after checking, & double checking my model number. Apparently my older Whirlpool dryer has a somewhat ambiguous model number because the rollers that were shipped each time looked nothing like the originals. I realize that is not particularily uncommon - manufacturers often modify...
Read more
More
$59.95
- Compare At:
-
$71.34
- You Save:
-
$11.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90767
The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.
This part fixes the following symptoms:
- Loose or wobbly components within the appliance
- Panels or parts that are not securely attached
- Rattling or unusual noises due to loose parts
- Damaged or missing screw
The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Certain buttons were'not working Brent T. • Easton , MD • November 17, 2014
One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS!
p.s. In doing my research come to find Maytag did little to insulate control panel from oven...
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98234
This U-type nut clips over a sheet-metal edge to create a durable threaded anchor for a screw. It helps secure panels, trim, and brackets so fasteners hold tight and components stay aligned and rattle-free. What it does:
- Clips onto thin sheet metal to provide captive threads where a standard nut cannot be used
- Holds screws securely to fasten panels, trim pieces, or mounting brackets
- Addresses issues like loose panels, missing/broken clips, or screws that will not tighten
- Helps reduce vibration and rattling from unsecured components
What's included:
Install notes:
- Disconnect power and shut off gas/water before servicing
- Position the U-nut over the panel edge with the threaded side aligned to the hole
- Start the screw by hand to avoid cross-threading; tighten snugly without overtightening
- Replace any damaged or corroded hardware to ensure a secure hold
Also known as: U-clip, speed nut, spring nut
Do-It-Yourself Stories from Customers like You
Idler pulley broke. Bob D. • Oak Lawn , IL • August 18, 2020
Replaced part. But the door was missing a screw and nut, so bought them and replaced them.
Read more
More
$11.95
- Compare At:
-
$14.34
- You Save:
-
$2.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3394508
This front bearing ring sits on the dryer's front bulkhead to provide a smooth, low-friction surface for the drum lip. Replacing a worn ring helps restore quiet, steady drum rotation and prevents scraping against the front panel. What it does:
- Supports the front of the drum and keeps it centered
- Provides a low-friction surface between the drum and front bulkhead
- Helps eliminate squealing, scraping, or grinding noises from the front
- Can address drum drag or rough, uneven rotation
What's included:
Install notes:
- Disconnect power; shut off gas supply for gas models before servicing
- Remove the top and front panel to access the front bulkhead and drum
- Support the drum while replacing the ring; install in the same orientation as the original
- Spin the drum by hand to ensure smooth, quiet rotation before reassembly; inspect the belt, idler pulley, rollers, and felt seals while open
Do-It-Yourself Stories from Customers like You
Drum rear seal worn front bearing same Joseph M. • Conshohocken , PA • February 20, 2015
Replace parts worn i repair appliance for60 years i am79
Read more
More
$53.95
- Compare At:
-
$64.20
- You Save:
-
$10.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP660658
This part is a motor clamp. This is a genuine OEM part and has been sourced directly from the manufacturer. This part is intended to replace a deteriorated, damaged, or broken motor clamp on certain makes of indoor appliance models. Motor clamps are essential for properly securing the drive motor on various types of indoor appliances such as washers, dryers, and refrigerators. Without the use of a motor clamp, the drive motor is free to move around or become detached. This can easily cause serious damage to the equipment and prevent proper functionality. Proper tools are needed to replace this part and appropriate safety measures should be adhered to when working on any type of equipment. For accurate information on how and where to install this replacement motor clamp, specific manufacturer diagrams should be referred to.As an authentic replacement part, this motor clamp can be used on multiple different models of washers, dryers, refrigerators, and washer/dryer combos manufactured by Kenmore, Maytag, Whirlpool, and Amana. Please note that this motor clamp is a genuine part made of high-quality materials and is sold individually.
Do-It-Yourself Stories from Customers like You
Motor locked up and was buried in lint due to the felt seal failing and letting lint into the motor area. Steven O. • Shrewsbury , MA • February 06, 2022
Replaced the motor, blower, rear drum felt seal, and drive belt. Vacuumed up the lint everywhere, cleaned extra lint out of the chute, around the blower, and rear vents.
Read more
More
$10.37
- Compare At:
-
$12.44
- You Save:
-
$2.07