Kenmore Refrigerator 363.9557710 (3639557710, 363 9557710) Parts
Genuine Ge part
By: Ge
Part Number: WR30X10093
The Electromechanical Icemaker Kit is an OEM replacement part for GE refrigerators. It includes the ice maker assembly components responsible for harvesting, ejecting, and monitoring the ice-making process.
Symptoms of a faulty electromechanical kit include:
- Ice not being produced or dispensing properly
- The ice maker failing to turn on or stop automatically
- Strange noises emanating from the ice maker
Causes can be worn parts like the ejector assembly or drive motor, as well as electrical malfunctions. Continued use puts wear on components that regulate ice production.
This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. Replace yours today for reliable ice on demand.
This part fixes the following symptoms
-
Ice maker not making ice
-
Ice maker won't dispense ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
No ice and leaking water Jeff P. • Pinecrest , FL • November 01, 2019
Much easier than expected, I was certain it had to be a water line but the solved everything
Read more
More
$182.78
- Compare At:
-
$215.68
- You Save:
-
$32.90
Genuine Ge part
By: Ge
Part Number: WR17X11653
The Ice Door Assembly is an OEM part for GE refrigerators. It is integral to the ice dispenser system, controlling access to the ice chute. This component ensures the efficient delivery of ice cubes or crushed ice when activated and seals off the chute when not in use to maintain the freezer's temperature and prevent frost buildup.
Symptoms of a bad Ice Door Assembly include:
- Frost or ice buildup around the dispenser area
- Ice escaping from the dispenser when not in use
- Failure to dispense ice
- Noise during operation indicating misalignment or malfunction
Causes of a bad Ice Door Assembly can include mechanical wear from frequent use, failure of the spring mechanism or solenoid that operates the door, or damage to the sealing surfaces that leads to air leaks.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Door sweating
-
Frost buildup
-
Ice maker won't dispense ice
-
Freezer not defrosting
See more...
Do-It-Yourself Stories from Customers like You
Ice flapper door stopped closing Lawrence D. • Holly Springs , NC • March 21, 2016
My refrigerator is 13 yrs old and began to build up frost in the ice cube shoot and the water tube began to freeze up over night. The flapper door was not closing completely. I simply removed the control panel by pulling up and out on the bottom edge, the edge is only about 1/8 inch thick, so don't reach in to far. You should be able to feel a small division line between the control panel and the refrigerator. No screw driver was needed to expose the 4 mounting screws of the inner dispenser...
Read more
More
$11.95
- Compare At:
-
$14.34
- You Save:
-
$2.39
Genuine Ge part
By: Ge
Part Number: WR72X240
The Slide Assembly RH is an OEM replacement part for GE side-by-side refrigerators. As a replaceable sub-assembly, it restores smooth extension of plastic vegetable/multi-purpose slides on the right interior. The slide measures approximately 16 inches.
Symptoms of a bad slide assembly include:
- Drawers failing to fully extend or retract inward
- Difficulty using bins and storage sections
- Noisy operation of problematic slides
- Stress concentration leading to cracks along slides
Causes stem from extended use gradually degrading nylon rollers and wear strips through inevitable friction. Exposure to excessive weights above slide limits may also bend or warp steel support rails quicker.
This genuine GE replacement part is also compatible with Hotpoint, RCA, and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken drawer slides for refrigerator drawers William L. • Bainbridge Is. , WA • February 24, 2015
Although the web ordering process was clear, I needed some "personal contact" via customer service. It took very little time to assure me the the parts were the correct ones and the video was easy to follow. When the parts arrived in 2 business days, it took only 30 mins. to complete the replacement of the slides. The video was a great way to assure there was no wasted time or effort.
Read more
More
$29.95
- Compare At:
-
$35.34
- You Save:
-
$5.39
Genuine Ge part
By: Ge
Part Number: WR72X239
This slide rail is an OEM replacement part for GE refrigerators. The slide rail measures 1.25 inches in height, 2 inches in width, and 16 inches in depth. This durable and reliable slide rail ensures smooth and effortless drawer operation.
Causes of failure involve repeated impact stresses absorbing the weight of the heavy door opening and closing potentially thousands of daily times over 10-20 years.
Symptoms of a faulty slide assembly include:
- Difficulty fully opening or closing the oven door
- Binding, jamming or misalignment of door movement
- Visible bending or warping of metal slide track components
- Loose fasteners connecting assembly to cabinetry
This OEM replacement part is also compatible with Hotpoint and RCA electric ranges as well.
NOTE: For the right-hand side order WR72X240. For the slide bearing order WR1X2048.
Do-It-Yourself Stories from Customers like You
I had 3 side rails that were broken Ken B. • Brandon , FL • March 09, 2016
The new slides fit perfectly. One thing to mention is that the slide rails come with the slide bearings so you do not need to buy those separate. When I called I was told I needed the bearings so I bought 3 assuming I would be able to salvage the others. Turns out I did not need them.
Read more
More
$32.72
- Compare At:
-
$38.61
- You Save:
-
$5.89
Genuine Ge part
By: Ge
Part Number: WR02X11330
The Refrigerator Union Connector is an OEM replacement part for GE refrigerators. It is responsible for connecting the water supply lines from the kitchen plumbing to the refrigerator, allowing water to flow to the ice maker and water dispenser. The plastic connector assists your water dispenser by joining two 5/16 inch x 5/16 inch plastic water lines. Over time, Union Connectors can crack or break under pressure.
Causes of a bad Union Connector include wear and tear from repeated use, exposure to extreme fluctuations or surges in water pressure, or damage from accidental mishandling.
Symptoms of a bad Refrigerator Union Connector include:
- Water leaks at or near the connector area
- Inconsistent or no water flow to the ice maker/dispenser
- Fluctuations in water pressure to the fridge
- Water damage to surrounding kitchen areas from leaks
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Leaking
-
Not dispensing water
See more...
Do-It-Yourself Stories from Customers like You
Water leaking from under/behind fridge (two sources) three problems a comedy of errors Joanne R. • Brookfield , WI • November 09, 2015
We noticed a puddle of water in front of the fridge a couple of months ago-dried the floor up both times and thought someone had dropped ice-or spilled water. A couple of weeks ago there was water dripping through the dropped tile ceiling in the basement. I shut off the water for the water supply to the fridge at the copper pipe in the basement and removed some of the tiles which felt a little damp. It still dripped all day. When my spouse came home he pulled down more of the tiles. It was as...
Read more
More
$6.53
- Compare At:
-
$9.03
- You Save:
-
$2.50
Genuine Ge part
By: Ge
Part Number: WR57X10051
The Dual Water Inlet Valve Kit is an OEM part for GE refrigerators. It controls the flow of water to both the ice maker and the water dispenser. This dual-function valve ensures that your refrigerator can produce ice and dispense water efficiently. The valve operates by opening and closing in response to signals from the refrigerator, allowing water to flow into the ice maker or water dispenser when needed.
The dual water inlet valve may wear out over time, especially in hard water areas, leading to issues like no ice production, malfunctioning water dispenser, or leaks.
Symptoms of a bad Dual Water Inlet Valve Kit include:
- No water being dispensed
- The ice maker not producing any ice
- A slow or irregular flow of water from the dispenser
- Water leaking from the valve
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Not dispensing water
-
Leaking
-
Ice maker not making ice
-
Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You
Ice dispenser small leak from inlet line causing growing frozen water buildup in area around ice maker Robert T. • Fountain Valley , CA • October 08, 2022
To verify if you have a bad valve in the first place read on... I first pulled out the ice maker to remove all the frozen water including the inlet section which was a huge solid waterfall of ice. While it was out completely disconnected I cleaned/chipped out the freezer section ice puddle. I also completely melted the ice cubes and ice puddles off the ice maker at the fill bucket end in the sink with running water careful to not get water near the power cord area. I then put a tall plastic cup...
Read more
More
$51.95
- Compare At:
-
$64.71
- You Save:
-
$12.76
Genuine Ge part
By: Ge
Part Number: WR23X37285
The Light Switch is an OEM replacement part for GE refrigerators. It controls the interior light, turning it on when the refrigerator door is opened and off when the door is closed. This ensures proper illumination for visibility when accessing the refrigerator's contents.
A malfunctioning light switch can result from wear and tear, electrical issues, or damage caused by repeated use. Over time, the internal mechanism may fail, or the housing can crack, leading to improper operation.
Symptoms of a bad light switch include:
- Interior light not turning on when the door is opened
- Light staying on even when the door is closed
- Flickering or inconsistent light operation
- Difficulty pressing or releasing the switch
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Refrigerator light switch broken. W W. • Bettendorf , IA • April 20, 2020
I ordered a new switch from APP and fixed my fridge.
However, the video posted for this repair on this site is not applicable to newer refrigerator models.
I have a 2015 GE GTE18IHCRSS and had to drop the control housing (#432 in the diagram) to attach the wire/plug assembly to the switch. Only had to remove the front screw with a 1/4" nut driver and that provided enough of a gap for me to plug in the switch.
So the correct method to replace the light switch in a newer model refrigerator is as...
Read more
More
$19.03
- Compare At:
-
$20.93
- You Save:
-
$1.90
Genuine Ge part
By: Ge
Part Number: WR9X489
The Defrost Timer is an OEM part for GE refrigerators. It serves as a crucial component in managing the defrost cycle of the refrigerator, ensuring that frost buildup is regularly melted away from the evaporator coils. This timer periodically switches the refrigerator between cooling and defrost mode, helping to maintain efficient operation and prevent overcooling or excessive ice accumulation.
Symptoms of a bad Defrost Timer include:
- Frost building up more than usual in the freezer compartment.
- The refrigerator or freezer sections becoming too warm due to prolonged defrost cycles.
- The refrigerator not transitioning out of defrost mode, leading to spoiled food due to inadequate cooling.
Causes of a bad defrost timer can include mechanical wear from continuous use, electrical failures that impede the timer’s operation, or simply aging components that no longer function reliably.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Fridge runs too long
-
Frost buildup
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Fresh foods section was not cooling but freezer was cold Cynthia B. • Loganville , GA • January 19, 2018
After reviewing a number of testimonials and your videos from your APP.com site I determined my most likely problem was either the defrost heater, thermostat, timer or possibly all three. The real challenge now began. Getting to the specific parts with my specific model number was a real challenge. It was not as easy as removing the light guard and 5 screws since my model had two Track Cant Shelf vertical rails restricting the removal of the back panel. Also, these rails could not be removed...
Read more
More
$41.95
- Compare At:
-
$49.59
- You Save:
-
$7.64
Genuine Ge part
By: Ge
Part Number: WR17X2891
The Water Tank Plastic Tube is an OEM part for GE refrigerators. It functions as a conduit, transporting water from the water tank to the dispenser and ice maker, ensuring a steady flow of water for these features.
You should replace this plastic tube if it becomes damaged or worn out. Causes of a bad water tank plastic tube can include wear and tear over time, blockages from mineral deposits, or physical damage from mishandling or kinks.
Symptoms of a bad water tank plastic tube include:
- Leaks or drips from the tube
- Reduced or no water flow to the dispenser or ice maker
- Visible cracks or damage to the tube
- Air bubbles in the water line
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Water leaking from under/behind fridge (two sources) three problems a comedy of errors Joanne R. • Brookfield , WI • November 09, 2015
We noticed a puddle of water in front of the fridge a couple of months ago-dried the floor up both times and thought someone had dropped ice-or spilled water. A couple of weeks ago there was water dripping through the dropped tile ceiling in the basement. I shut off the water for the water supply to the fridge at the copper pipe in the basement and removed some of the tiles which felt a little damp. It still dripped all day. When my spouse came home he pulled down more of the tiles. It was as...
Read more
More
$21.68
- Compare At:
-
$29.41
- You Save:
-
$7.73
Genuine Ge part
By: Ge
Part Number: WR2X9391
The Light Socket is an OEM part for GE refrigerators. It is responsible for holding the refrigerator's light bulb and ensuring it receives power to illuminate the interior when the door is opened.
You should replace the light socket if it becomes faulty. Causes of a bad light socket can include wear and tear from regular use, electrical issues such as short circuits or power surges, and corrosion from moisture exposure.
Symptoms of a bad light socket include:
- The refrigerator light not turning on when the door is opened
- Flickering or intermittent light operation
- Visible damage or corrosion on the socket
- The light bulb not fitting securely or falling out
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Our light was flickering and didn't stop with a new bulb Dianne F. • Hampton , VA • February 14, 2015
I researched the model and watched a YouTube video on the repair. I ordered the part. Two days later it arrived and I made the repair. I'm all thumbs in home repairs, but had it done in 5 minutes. My husband was surprised. Nice that I can take care of a few simple repairs around the house.
Read more
More
$10.95
- Compare At:
-
$12.92
- You Save:
-
$1.97
Genuine Ge part
By: Ge
Part Number: WR50X122
The Defrost Thermostat is an OEM part for GE refrigerators. It regulates the temperature of the defrost cycle by sensing the temperature of the evaporator coils and signaling the defrost heater to turn on or off. This helps prevent ice buildup on the coils, ensuring efficient cooling and proper refrigerator operation.
You should replace this defrost thermostat if it fails to regulate the defrost cycle correctly. Common causes of a bad thermostat include electrical failures, wear and tear from regular use, or damage from temperature fluctuations.
Symptoms of a bad defrost thermostat include:
- Excessive frost buildup in the freezer
- Refrigerator not maintaining the correct temperature
- Defrost cycle not activating
- Water leaking inside the refrigerator
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Fridge too warm
-
Fridge runs too long
-
Freezer not defrosting
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
Ice melting to a large clump and frost build up GE gss20ietdbb for years no parts were helping issue. Dustin M. • Charlotte , NC • January 07, 2023
My GSS20IETD BB side-by-side refrigerator had been having the ice form into a single mass over a period of a week after cleaning it out. It actually kept breaking my ice maker auger and pushing the slide-in tray or shelf over the ice maker up breaking it also. Frost would form all over food after about a couple of weeks. The ice auger motor would freeze up and stop turning. The coils did not have frost on them when I was able to view them. I replaced the thermistors in the freezer, defrost the...
Read more
More
$41.95
- Compare At:
-
$50.34
- You Save:
-
$8.39
Genuine Ge part
By: Ge
Part Number: WR17X4312
This OEM Replacement Part is an ice container assembly for GE side-by-side refrigerators from 1998 models and newer with 24 to 27 cubic feet capacity. The assembly includes a 12 3/8” wide x 12 3/8” long x 14 5/8” tall ice bucket with an integrated auger to rotate and move ice into the dispenser chute. The auger within the assembly helps move the ice cubes forward, enabling easy access and dispensing.
Causes of a bad assembly can include wear and tear over time, damage from frequent use or mishandling, and issues with the auger motor or blades that prevent proper ice movement.
Symptoms of a bad Ice Bucket and Auger Assembly include:
- Ice not dispensing properly
- The auger not turning or making unusual noises
- Cracks or damage to the ice bucket
- Ice jams or clogs in the dispenser chute
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Rusty ice auger Daniel S. • Barrington , IL • March 28, 2016
Screwdriver
Read more
More
$215.43
- Compare At:
-
$256.36
- You Save:
-
$40.93
Genuine Ge part
By: Ge
Part Number: WR62X23154
The Solenoid Valve Kit is an OEM part for GE refrigerators. This kit includes the solenoid valve, which is responsible for regulating the flow of refrigerant in the cooling system.
Causes of a bad solenoid valve kit include electrical malfunctions, physical damage, refrigerant leaks, or general wear and tear over time.
Symptoms of a faulty solenoid valve kit:
- Refrigerator not cooling properly or not maintaining consistent temperatures
- Compressor running constantly or cycling too frequently
- Frost buildup or ice accumulation in the freezer compartment
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.
Do-It-Yourself Stories from Customers like You
Ice (broken seal) fizzer light out due to ice then auger motor auger coupler and solenoid cube failure Damon B. • Tumwater , WA • December 19, 2015
This was a two and half year issue as different things failed at different times. I would get one part, then another would fail. Ultimately, I got to a point where what failed, I hadn't been ordered the part yet.
The seal on the freezer door took three bathing's before it plumped up and un-creased. The directions on the box it is shipped in said to heat the seal up in hot water then cool it down with tap water. I didn't need to do that. It took a lot of massaging of the seal, but...
Read more
More
$99.95
- Compare At:
-
$118.94
- You Save:
-
$18.99
Genuine Ge part
By: Ge
Part Number: 40A15
The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments.
All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster.
Symptoms of a burnt out refrigerator light bulb include:
- Dim or no light illuminating inside refrigerator shelves
- Shadows and dark spots making it difficult to find items
- Higher utility costs from leaving the door open to see inside
This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Nothing worked except the light :) Przemyslaw B. • Wallington , NJ • September 20, 2014
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks
Read more
More
$18.95
- Compare At:
-
$22.36
- You Save:
-
$3.41
Genuine Ge part
By: Ge
Part Number: WR60X187
The Condenser Fan Motor is an OEM part for GE refrigerators. It is designed to circulate air through the condenser coils, helping to dissipate heat and keep the refrigerator's internal components cool. This ensures efficient operation and prevents the compressor from overheating, which is essential for maintaining the refrigerator's performance and longevity.
You should replace the condenser fan motor if it becomes faulty. Causes of a bad fan motor can include electrical failures, wear and tear from regular use, or blockages that cause the motor to overheat or burn out. A malfunctioning fan motor can lead to inadequate cooling, increased energy consumption, and potential damage to other refrigerator components.
Symptoms of a bad condenser fan motor include:
- The refrigerator not cooling properly
- Unusual noises coming from the back of the refrigerator
- The compressor running hot or cycling on and off frequently
- The condenser coils feeling excessively hot
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Freezer section too warm
-
Noisy
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Side by side fridge had stopped cooling in both fridge and freezer and was hot to touch in center between the two Robert P. • King , NC • August 11, 2015
I googled the issue and read several articles. Most started with cleaning the coils (which mine are on the bottom) (19yr old Kenmore 363.9557812). I had not really ever cleaned them well, vacuuming did little. I had to remove the cardboard cover off the back of the frig, and blew them clean (front to back). Once that was done, I started cleaning from the back and noticed the fan wasn't turning week (condensor fan). Blew it out too, have it a good soon with a pencil, it puffed out a bunch of...
Read more
More
$226.48
- Compare At:
-
$269.51
- You Save:
-
$43.03
Genuine Ge part
By: Ge
Part Number: WR60X114
The Evaporator Fan Blade is an OEM component for GE freezers and bottom-mount refrigerator designs. Located inside the freezer compartment, this fan blade spins to circulate cold air evenly throughout the storage space.
Causes of a faulty evaporator fan blade include natural fatigue from running year-round. Freezers exposed to humid environments may experience faster corrosion.
Symptoms include:
- Abnormal sounds like knocking or clunking from inside the walls
- cold spots developing in certain freezer areas
- Higher power bills from inefficient temperature regulation
- Frost or ice patches forming on evaporator coils
This part is also compatible with some brands like Hotpoint, RCA, and Kenmore.
Do-It-Yourself Stories from Customers like You
Broken fan blade Thomas H. • West Blocton , AL • April 21, 2014
I used a set of ring pliers to remove the old retaining ring, then spread the plastic ribs around the fan motor shaft with a small flat bladed screwdriver to ease removal of the old fan blade. I reversed the process to replace the blade, gently tapping a socket from my socket wrench set placed over the motor shaft and ribs with a small rubber mallet. I stopped when the shaft protruded about 1/8" beyond the plastic ribs of the new fan blade, then installed the new retaining clamp ring with the...
Read more
More
$17.95
- Compare At:
-
$24.40
- You Save:
-
$6.45