Kenmore Refrigerator 596.52673202 (59652673202, 596 52673202) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 8009
Original Whirlpool light bulb, 40 watt.
Symptoms of needing to replace the light bulb include:
- Dimming or flickering light
- Complete lack of illumination inside the appliance
- Visible signs of damage or burnout on the bulb itself
Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.
Do-It-Yourself Stories from Customers like You
Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016
I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it...
Read more
More
$17.76
- Compare At:
-
$20.96
- You Save:
-
$3.20
Genuine Whirlpool part
By: Whirlpool
Part Number: EDR4RXD1
The Water Filter is an OEM part for Whirlpool refrigerators. It is designed to filter and purify the water for your refrigerator, ensuring clean and fresh drinking water and ice.
A bad refrigerator water filter can be caused by regular use and the buildup of contaminants over time. It may also become less effective if not replaced according to the manufacturer's recommended schedule.
Symptoms of a bad refrigerator water filter include:
- A decrease in water flow or water pressure.
- An unpleasant taste or odor in the water.
- The presence of particles or sediment in the water.
- Cloudy or discolored ice cubes.
If you notice any of these signs or if it has been more than six months since your last filter replacement, it's time to replace the refrigerator water filter with this genuine OEM part. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Not dispensing water
-
Ice maker dispenses too little ice
-
Ice maker won't dispense ice
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Broken water valve Terry H. • Brighton , CO • March 24, 2014
Ordered part and replaced it
Read more
More
$83.95
- Compare At:
-
$100.74
- You Save:
-
$16.79
Genuine Whirlpool part
By: Whirlpool
Part Number: W10613606
The Compressor Start Relay is an OEM part for Whirlpool refrigerators. This component helps to kickstart the compressor, facilitating the refrigeration cycle that cools the interior of the fridge.
Such issues can stem from electrical failures within the relay, physical damage, or wear and tear from regular use. When the relay does not function correctly, it can lead to inconsistent cooling and, in severe cases, cause the compressor to overheat and fail prematurely.
Symptoms of a failing Compressor Start Relay include:
- The refrigerator not cooling properly or not cooling at all
- A noticeable clicking sound emanating from the back of the refrigerator, indicating the relay is trying to start the compressor but failing
- The refrigerator starts and stops frequently, unable to maintain a constant temperature
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Clicking sound
-
Won't start
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Fan would run but compressor would not start-resulting in no cooling. Thomas F. • De Soto , WI • March 14, 2014
Removed back cover and installed new start device. Plugged in refridgerator and it runs like new.
Read more
More
$53.27
- Compare At:
-
$74.44
- You Save:
-
$21.17
Genuine Whirlpool part
By: Whirlpool
Part Number: W11396033
The Door Switch is an OEM part for Whirlpool refrigerators. This switch is crucial for controlling the interior lights and the activation of certain refrigerator functions when the door is opened or closed.
Symptoms of a failing Door Switch include:
- Interior lights staying on when the refrigerator door is closed
- Interior lights not turning on when the door is opened
- The refrigerator unexpectedly starting or stopping
- Alarms or indicators malfunctioning, signaling an open door when it is closed
Causes of a bad door switch can involve mechanical failure due to wear and tear from frequent use, damage from impacts (such as slamming the door), or electrical issues like a short circuit or faulty wiring.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Light switch on bottom freezer compartment flakey (intermittant) Alfred M. • Pahoa , HI • September 07, 2014
I watched the video on replacing the switch on a side freezer where prying out to original switch did not look difficult. I then got on the floor and tried to pry out my switch. Had a terrible time (locking tab or switch body hardened with time?) and mangled the switch terribly and the upper panel of the freezer somewhat, but the switch did come out. AND THEN the top freezer panel with the switch and light assembly fell out into my hands! I was able to unplug one Molex connector and the...
Read more
More
$29.30
- Compare At:
-
$34.87
- You Save:
-
$5.57
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2169142
The Evaporator Fan Motor Blade is an OEM part for Whirlpool refrigerators. It is a crucial component of the refrigerator's cooling system, attached to the evaporator fan motor to circulate air over the evaporator coils. This circulation helps distribute cold air throughout the refrigerator and freezer compartments, ensuring consistent temperatures and efficient operation.
Symptoms of a bad Evaporator Fan Motor Blade include:
- Unusual noise coming from the fan area, indicating the blade may be hitting another component or is unbalanced,
- Insufficient cooling in the refrigerator or freezer compartments,
- The refrigerator running longer than usual to maintain the desired temperature.
Causes of evaporator fan motor blade failure typically include physical damage from interference with other components, wear from continuous use, or buildup of ice or debris that unbalances the blade.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Loud noise coming from freezer. Periodic grinding like an old fan/motor. Jimmy F. • Evanston , IL • July 26, 2022
The fridge is 20+ years old in a home we recently moved into.
It sounded like a motor getting stuck on something or grinding weird... was hoping it wasn't something more serious. Found this site, clicked 'noisy' and got the replacement evaporator fan motor blade as well as the motor evaporator.
Turned out I didn't really need to replace the fan blade, but since I had it and ours was old, figured I might as well put in the new parts.
Followed the videos here, which were really helpful. The...
Read more
More
$26.95
- Compare At:
-
$32.84
- You Save:
-
$5.89
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10128551
The Evaporator Fan Motor is an OEM part for Whirlpool refrigerators. It is responsible for circulating air over the evaporator coils, which helps to maintain a consistent temperature throughout the refrigerator and freezer compartments. It operates at a power requirement of 115V, 60Hz, and 0.14A, featuring a shaft that measures 1/8" in diameter and 5/8" in length.
Causes of a bad evaporator fan motor can include electrical failures, wear and tear from continuous use, or obstruction from debris that hinders the fan's movement. A malfunctioning fan motor can lead to uneven cooling and compromised performance of the refrigerator.
Symptoms of a bad evaporator fan motor include:
- Inconsistent temperatures in the refrigerator or freezer
- Unusual noises coming from the fan area
- The refrigerator running continuously without cycling off
- Frost buildup on the evaporator coils
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Evaporator fan stopped working Robert M. • Metairie , LA • December 25, 2016
The fan has a very thin wire in it's coil, and when that wire breaks, you need a new fan. In a previous repair, i noticed that an ice build-up had dislodged the wiring on my fan and severed the coil winding. I was able to undo the winding a couple of turns and get it working again.
But more recently, the fan stopped and there was no repairing it. So i ordered a new fan from AppliancePartsPros.com and it got here in very good time. The new fan was slightly different as the prongs seemed to be...
Read more
More
$54.26
- Compare At:
-
$72.13
- You Save:
-
$17.87
Genuine Whirlpool part
By: Whirlpool
Part Number: R0181181
The Door Closure Kit is an OEM replacement part for Whirlpool refrigerators. The kit includes all the necessary parts to ensure your refrigerator door closes and seals properly - including two black and two white cams used for both the door and the hinge.
Over time, door closure mechanisms can wear down from continual opening and closing motions. The cushions compress and arms lose tension. Without a tight seal, cold air can escape raising energy costs.
Symptoms of a bad door closure kit include:
- Doors not closing or sealing fully
- Difficulty closing doors that don't latch securely
- Noticeable cool air loss around door edges
- Frost buildup indicating air leakage
It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Door won't open or close
-
Door sweating
-
Fridge too warm
-
Clicking sound
See more...
Do-It-Yourself Stories from Customers like You
Door didn't close the bottom cam was worn out Miguel G. • Ridgecrest , CA • October 17, 2015
Used floor jack to lift and secure door, left upper hinge point in place, removed lower hinge support, removed old cams and installed new ones and lubricated, secured and adjusted hinge .
Read more
More
$10.43
- Compare At:
-
$12.41
- You Save:
-
$1.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67001503
The Large Crisper Pan is an OEM replacement part for Whirlpool refrigerators. It provides a spacious contained area to organize and store fruits and vegetables.
Causes of a faulty pan can include cracks or damage accumulated over years of use. Prolonged exposure to spills within the crisper may degrade material integrity.
Symptoms include:
- Loose or misaligned pan placement within the frame
- Holes or leaks compromising humidity control
- Containment issues resulting in disorganized storage
This OEM component is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper bottom-mount refrigerator models.
Do-It-Yourself Stories from Customers like You
Ice maker leaking water Don R. • Orem , UT • September 01, 2017
Viewed the replacement video on the appliancepartspros.com repair process to see how complicated the repair was. Replacement part ordered but took a full 7 days to cross 2 states??
Replacement part was authentic replacement and was installed in about 15 minutes. One thing that was not mentioned in the video...make sure the water spout in routed correctly into the ice maker.
While we were ordering, replacement crisper drawer ordered as well.
Read more
More
$95.95
- Compare At:
-
$115.14
- You Save:
-
$19.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12568001
The Water Filter Cover is an OEM part for Whirlpool refrigerators. This cover encases and protects the water filter, ensuring it remains secure and clean while also blending seamlessly with the refrigerator's interior design.
You should replace the water filter cover if it becomes damaged or fails to secure the filter properly. Common causes of a bad water filter cover include physical damage from accidental impact, wear and tear from regular use, or warping due to temperature fluctuations.
Symptoms of a bad water filter cover include:
- Cracks or visible damage to the cover
- Difficulty securing the water filter
- The cover not fitting properly or coming loose
- Leaks around the water filter area
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water filter holder was broken John B. • Chester , VA • June 04, 2015
Used screwdriver to push in plastic tabs holding old unit to the top of the refrigerator box
Read more
More
$58.47
- Compare At:
-
$70.16
- You Save:
-
$11.69
Genuine Whirlpool part
By: Whirlpool
Part Number: W11395888
The Cartridge Bypass is an OEM part for Whirlpool refrigerators. It is designed to replace the water filter cartridge when filtration is not desired or necessary. This allows the refrigerator to bypass the filter and provide unfiltered water to the dispenser and ice maker.
Common causes of failure include wear and tear, improper installation, or physical damage from mishandling.
Symptoms of a bad Cartridge Bypass include:
- Water leakage around the filter area
- Reduced water flow or no water flow from the dispenser
- Ice maker not producing ice
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water dispenser made a lot of noise Pablo C. • Apex , NC • November 23, 2015
Water dispenser came down to a trickle and made a lot of noise, I changed the filter but it didnt help and thus the water tank/head assembly needed to be replaced.
Replacing the water Tank/head assembly was an easy task, the hardest part is removing the covers and taking care of not breaking the insulation of the water inlet hose.
For the not-so-experts like me it is also good to rememebr to have a bucket to collect all the water that comes out after the connection to the solenoid valves is...
Read more
More
$43.95
- Compare At:
-
$52.30
- You Save:
-
$8.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67005959
The Ice Crusher Bucket is an OEM part for Whirlpool refrigerators. It serves as a container for holding and crushing ice from the icemaker. The bucket houses the crushing mechanism that breaks down ice cubes into smaller pieces, making it convenient for dispensing crushed ice through the refrigerator's door.
Over time, the ice crusher bucket can become worn out or damaged due to regular use, exposure to moisture, or accidental impact.
Symptoms of a bad ice crusher bucket include:
- The bucket not holding ice properly
- Issues with dispensing crushed ice
- Unusual noises during ice crushing
- Visible cracks or damage to the bucket
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice would not come out thru the door despencer Sam B. • Houston , TX • June 12, 2014
All the corners of the Ice Bucket were cracked and was causing the screw inside the bucket to jam.
Read more
More
$113.95
- Compare At:
-
$135.60
- You Save:
-
$21.65
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10289690
This ice maker cover shields the front of the ice maker assembly, protecting the module and moving parts from dust and accidental contact. Replacing a cracked or missing cover restores a clean, finished appearance and keeps components protected.
- Shields the ice maker's front components and control module
- Helps keep dust, splashes, and debris out of the mechanism
- Prevents accidental contact with moving ejector parts
- Replace if the cover is cracked, warped, missing, or will not stay attached
What's included: 1 ice maker cover Install notes:
- Unplug the refrigerator before servicing
- Access the ice maker in the freezer compartment
- Carefully release the retaining tabs and remove the old cover; note orientation
- Align the new cover and press until it snaps securely into place—do not force the tabs
Do-It-Yourself Stories from Customers like You
Ice maker quit working Peter S. • Lawton , MI • October 29, 2015
Replaced icemaker and shutoff arm. Easy project.
Read more
More
$8.36
- Compare At:
-
$9.95
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12544002
The Primary Water Inlet Valve is an OEM part for Whirlpool refrigerators. This valve controls the flow of water into the refrigerator's ice maker and water dispenser.
Causes of a bad primary water inlet valve can include mineral deposits or debris clogging the valve, electrical issues such as faulty solenoids, and general wear and tear from frequent use.
Symptoms of a bad primary water inlet valve include:
- No water dispensing from the refrigerator
- The ice maker not producing ice
- Leaks around the valve area
- Low water pressure from the dispenser
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Water dispenser would not work, ice maker periodically stopped working. David M. • Lafayette , LA • June 08, 2020
Replaced both primary and secondary water valves to make sure I fixed the problem. Both valves have to open when you function the water dispenser and when the ice maker tray needs refilling.
YouTube video was a great help and let me know that I had to lengthen one hose. The video showed me the exact parts I needed to lengthen the hose.
YouTube video also let me know that I had needed to transfer the internal springs in the hoses when I cut the old connections off. Never would have known...
Read more
More
$141.32
- Compare At:
-
$168.17
- You Save:
-
$26.85
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12565502
The Ice Chute Door Spring is an OEM part for Whirlpool refrigerators. This part returns the ice chute door to its closed position after ice has been dispensed, ensuring the door remains sealed to maintain proper temperature and efficiency.
Causes of a bad ice chute door spring can include wear and tear over time, corrosion from exposure to moisture, or damage due to repeated use or mishandling.
Symptoms of a bad ice chute door spring include:
- The ice chute door not closing properly
- Ice or frost buildup around the ice chute
- Warm air entering the freezer compartment
- Difficulty in dispensing ice
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Flapper for ice and water broke. Jack W. • Bandon , OR • December 02, 2017
Ordered new part, very easy to replace only took about 5 minutes to install new part and get everything going again. Part was a perfect fit and was shipped and received in only a few days. Thanks
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12562701
The Ice Chute Door is an OEM replacement part for Whirlpool side-by-side refrigerators. It provides access to the dedicated ice and water storage and dispensing compartment located on the refrigerator door.
Causes of a faulty chute door can include normal wear from frequent use. Internal temperature fluctuations may cause durability issues over several years.
Symptoms of problems include:
- Failure to fully close or form a tight seal
- Difficulty dispensing ice or water due to door misalignment
- Premature cooling loss from unsealed opening
- Physical damage preventing proper closing
This OEM door is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore side-by-side refrigerators.
Do-It-Yourself Stories from Customers like You
Teeth broke off of ice chute door Deanna N. • Bay Saint Louis , MS • March 01, 2018
Replaced ice chute door by watching video.
Read more
More
$9.95
- Compare At:
-
$11.74
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90767
The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.
This part fixes the following symptoms:
- Loose or wobbly components within the appliance
- Panels or parts that are not securely attached
- Rattling or unusual noises due to loose parts
- Damaged or missing screw
The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Certain buttons were'not working Brent T. • Easton , MD • November 17, 2014
One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS!
p.s. In doing my research come to find Maytag did little to insulate control panel from oven...
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51