Kenmore Dryer 110.70012000 (11070012000, 110 70012000) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 339392V
Captures lint and debris during drying to maintain airflow and prevent vent clogs. Replace if torn, frayed, or handle is broken. Verify fit by model number.
Do-It-Yourself Stories from Customers like You
Noisy & inefficient Richard M. • Indianapolis , IN • December 06, 2016
After having replaced the drum support rollers twice in a roughly 3yr period, I realized something wasn't quite right, and indeed it wasn't. I had been ordering the wrong parts - I did use the online parts locator after checking, & double checking my model number. Apparently my older Whirlpool dryer has a somewhat ambiguous model number because the rollers that were shipped each time looked nothing like the originals. I realize that is not particularily uncommon - manufacturers often modify...
Read more
More
$55.95
- Compare At:
-
$67.14
- You Save:
-
$11.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3406105
Dryer won't start or runs with door open? This door switch assembly detects when the door is closed. Easy 10-15 minute repair with step-by-step video.
Do-It-Yourself Stories from Customers like You
Roper dryer stops working then heater runs in all cycles including no heat Eric L. • Hendersonville , TN • January 12, 2015
Background:
Roper Electric Dryer model REX6634RQ0 purchased new in early 2006 by my wife. Dryer use profile is low to moderate as it was used by only one person (working from home) from 2006 to late 2007 then moved and stored in a dry basement until mid 2009. Moved and used by primarily just two people (plus occasional children visits) from mid-2009 thru late 2011 with three moves involved with in that time. Then stored in a dry shipping container until moved again in 2013. The multiple...
Read more
More
$26.74
- Compare At:
-
$32.09
- You Save:
-
$5.35
Genuine Whirlpool part
By: Whirlpool
Part Number: W10861521
Seals dryer door to prevent heat loss and improve efficiency. Replace when torn, frayed, or loose. Fits in door groove; may need adhesive for install.
Do-It-Yourself Stories from Customers like You
Gasket frayed on dryer. Ray B. • Bellbrook , OH • October 16, 2017
Purchased the gasket, but upset with myself I forgot the high temp adhesive.....a 13$ part and now 7$ for shipping. Think not for my mistake
Read more
More
$52.95
- Compare At:
-
$62.48
- You Save:
-
$9.53
Genuine Whirlpool part
By: Whirlpool
Part Number: W11050897
Dryer not heating or overheating? This high limit thermostat kit prevents overheating by cutting power when temperature exceeds safe levels. DIY repair.
Do-It-Yourself Stories from Customers like You
Dryer flame would go out after a few minutes Robert B. • Eben Junction , MI • June 05, 2015
Purchased, Igniter Kit, Gas Valve Coil Kit, and as a precaution Thermal Fuse and Cutoff-Tml. Was pretty confident the problem was the gas valve coil, but figured that why not just replace the other items while I had the unit apart. Researching and utilizing this site certainly helped me out in figuring what the problem may be. Watched the instruction videos which were very detailed and helpful. The replacement and repair was not that difficult and the work was done rather quickly. Doing...
Read more
More
$15.71
- Compare At:
-
$18.54
- You Save:
-
$2.83
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10359269
Right-side shaft for dryer drum support roller. Replace if worn, bent, scored, or damaged to restore proper drum rotation. Installs on right side of cabinet.
Do-It-Yourself Stories from Customers like You
Old appliance with worn drum roller shafts and rollers Macario M. • Kingsville , TX • December 17, 2021
Use the videos on this website here and you can repair most brands. Many are duplicate in design.
1. Unplug the machine.
2. Move it away from a confined area to get more room.
3. Remove lint filter and the two screws that hold the exhaust filter port to the top of the cabinet.
4. Use a putty knife or actually a butter knife and release the top of the cabinet from the main drum housing. You will slide the knife between the top and the main cabinet at the plastic catches. Look for them and you...
Read more
More
$51.95
- Compare At:
-
$61.82
- You Save:
-
$9.87
Genuine Whirlpool part
By: Whirlpool
Part Number: 239087
Seals the rear drum opening to prevent air leaks and reduce noise. Replace if worn, frayed, or causing rattling sounds. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
Noisy & inefficient Richard M. • Indianapolis , IN • December 06, 2016
After having replaced the drum support rollers twice in a roughly 3yr period, I realized something wasn't quite right, and indeed it wasn't. I had been ordering the wrong parts - I did use the online parts locator after checking, & double checking my model number. Apparently my older Whirlpool dryer has a somewhat ambiguous model number because the rollers that were shipped each time looked nothing like the originals. I realize that is not particularily uncommon - manufacturers often modify...
Read more
More
$45.28
- Compare At:
-
$58.24
- You Save:
-
$12.96
Genuine Whirlpool part
By: Whirlpool
Part Number: W10854425
The Dryer Clip is an OEM component for Whirlpool electric and gas dryers. It securely fastens critical ductwork attached to the dryer cabinet. Over extended periods, the constant vibrations produced during tumbling cycles cause microscopic fractures or loosening within the clip material where it grips duct joints.
Causes relate to ordinary fatigue from long-term resonance vibrations concentrated at anchoring points.
Symptoms involve:
- Loose or detached venting/ductwork affecting airflow
- Noticeable leaks emerging at separation interfaces
- Reduced drying effectiveness due to compromised ventilation
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Dryer just needed some new parts Kim K. • Murrieta , CA • November 01, 2020
The front panel clips needed to be replaced as they were bent and the some of the tabs for the bearing ring had broken off. Very pleased with the price, the parts and the quick delivery. Thank you.
Read more
More
$15.71
- Compare At:
-
$18.69
- You Save:
-
$2.98
Genuine Whirlpool part
By: Whirlpool
Part Number: 49572A
The LP Conversion Kit is an OEM component for Whirlpool and KitchenAid gas dryers. It allows conversion from natural gas to liquid propane fuel operation. Over time in gas-powered dryers, improper gas/air mixture causes part wear like weakened burner components. This is risky if overlooked but converting to an alternative fuel safely remedies.
Causes relate to unavoidable deterioration from gas combustion stresses. Conversion using this kit prevents hazardous gas leaks or explosions.
Symptoms involve:
- Diminished or unsafe heat levels from burners
- Gas leaks which exacerbate safety risks over time
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Needed to convert gas dryer to propane Ken B. • Foresthill , CA • June 12, 2014
Ordered the parts from ApplianceParts Pros.com and saved the $100 service call. The fix was easy, complete instructions enclosed.
Read more
More
$32.95
- Compare At:
-
$39.21
- You Save:
-
$6.26
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017
Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.
Do-It-Yourself Stories from Customers like You
Chipped paint Thomas S. • Middletown , DE • September 03, 2014
Touch up paint
Read more
More
$11.51
- Compare At:
-
$13.70
- You Save:
-
$2.19
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930
Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.
The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.
The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.
Symptoms needing for Appliance Spray Paint include:
- Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
- A desire to refresh or update the appearance of the appliance without the need for complete replacement
- Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$24.95
- Compare At:
-
$29.94
- You Save:
-
$4.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90296
The Push Clip is an OEM replacement part for Whirlpool dryers. Situated internally near the rear cylinder wall, it firmly secures the drum support roller assembly.
Causes of failure relate to fatigue from years of absorbing drum impacts and associated mechanical stresses. Corrosion penetration if moisture enters the clip mounting area increases operational resistance over time as well.
Symptoms consist of:
- Uneven drying and weakened tumbling action inside the cylinder
- Vibration or noise emerging from the rear roller area
- Premature wear signals stemming from dislocated roller assembly
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Screaching noise Linda Z. • Kailua Kona , HI • February 06, 2015
Followed the video- opened the front of the dryer and removed the drum. It was evident that one of the wheels had worn and wasn't turning freely like the other one. The video showed how to remove the roller. Very simple process and now the dryer works just fine.
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP694424
If your dryer won't stay lit or shuts off after a few minutes, the gas limiter may be faulty. This regulator controls safe gas flow to the burner.
Do-It-Yourself Stories from Customers like You
I needed to convert from lp to natural gas Mark S. • Raleigh , NC • June 01, 2015
Removed LP Orifice and LP Gas limiter.
Orifice was easy, however the gas limiter was the tricky one because I had no instructions to what went where. I could not find anything online as to how to convert from LP to Natural Gas, but you could find several things as to how to convert from Natural to LP.
I ended up finding the Dryer schematic on line for the Whirlpool Duet natural gas dryer and was able to figure out what sequence the Spring, regulator and limiter went in. The order I just...
Read more
More
$26.74
- Compare At:
-
$32.09
- You Save:
-
$5.35
Genuine Whirlpool part
By: Whirlpool
Part Number: 279264
Replaces worn dryer front bearing and seal that cause squealing or scraping noise. Essential for smooth drum rotation. Confirm fit with your model.
Do-It-Yourself Stories from Customers like You
Noisy & inefficient Richard M. • Indianapolis , IN • December 06, 2016
After having replaced the drum support rollers twice in a roughly 3yr period, I realized something wasn't quite right, and indeed it wasn't. I had been ordering the wrong parts - I did use the online parts locator after checking, & double checking my model number. Apparently my older Whirlpool dryer has a somewhat ambiguous model number because the rollers that were shipped each time looked nothing like the originals. I realize that is not particularily uncommon - manufacturers often modify...
Read more
More
$65.95
- Compare At:
-
$78.48
- You Save:
-
$12.53
Genuine Whirlpool part
By: Whirlpool
Part Number: WP18776
The Top Lock is an OEM component for Whirlpool electric and gas dryers. It secures the outer metal cabinet door during drying cycles for safety and ventilation. This lock provides a method for releasing and latching the door tightly when shut.
Symptoms of a failing top lock may include:
- Inability to fully close or properly latch the dryer door
- Accidental opening from deficient locking during operation
- Difficulty manipulating the lock due to worn or broken parts
Causes related to normal wear of moving parts through frequent use over several years. Deformation from excessive exterior impacts could also damage locking mechanisms.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Multiple problems warn parts Jeffrey C. • Severna Park , MD • April 29, 2015
Excellent! Repairs went as planned. Diagnosed problem parts on my dryer; ordered parts online thru Appliance Parts Pros; parts arrived very quick - standard ground - and parts shipped as ordered with no mistakes. Plus, they sent me a Wine voucher (my order was nearly $200). And, if you have trouble troubleshooting your appliance problem or figuring out how a part is supposed to be installed on your appliance, Appliance Parts Pros has an excellent video library to help you!
I will certainly...
Read more
More
$12.56
- Compare At:
-
$14.95
- You Save:
-
$2.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3405184
The Door Handle is an OEM component for Whirlpool dryers. It provides convenient access to load and unload clothes through the dryer door opening.
Causes of a bad door handle can include normal wear and tear over extended use. Repeated clutching and releasing of the handle leads to fatigue of rubberized grip areas and loosening of mechanical connections. Accidental falls or impacts when transporting dry loads of clothes could also damage the handle structure or mounting.
Symptoms of a bad dryer door handle include:
- Increased play, wobble, or looseness when grasped
- Detachment or separation from the door assembly
- Cracks, splitting, or broken areas compromising the grip surface
- Inability to smoothly open or close the dryer door
Compatible models also include Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore dryers.
Do-It-Yourself Stories from Customers like You
Missing oven and broiler handle Travis W. • Zwolle , LA • October 15, 2014
Separated oven door by removing screws. Inserted handle and secured with clips, and reassembledo door with screws provided.
In served broiler handle and snappedal into place.
Read more
More
$54.95
- Compare At:
-
$64.84
- You Save:
-
$9.89
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90767
The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.
This part fixes the following symptoms:
- Loose or wobbly components within the appliance
- Panels or parts that are not securely attached
- Rattling or unusual noises due to loose parts
- Damaged or missing screw
The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Certain buttons were'not working Brent T. • Easton , MD • November 17, 2014
One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS!
p.s. In doing my research come to find Maytag did little to insulate control panel from oven...
Read more
More
$7.31
- Compare At:
-
$8.70
- You Save:
-
$1.39