Samsung Washer WF20M5100AW Parts
Genuine Samsung part
By: Samsung
Part Number: DC62-00142G
Fix a washer that won't fill with water or leaks onto the floor. This water inlet valve controls water flow into your machine. DIY repair in 10 minutes.
Do-It-Yourself Stories from Customers like You
Water leaking into drum or drum filling with water when not in use Kendall L. • Matthews , NC • May 22, 2016
The Cold Water Inlet Valve had a very good You Tube Video and I followed it. One note of caution, as I chuckled at the guy on the video saying watch for sharp edges, he was correct. When removing one of the lines from the valve, my pliers slipped and my elbow hit the front of the
machine(inside edge) and cut my elbow. So after that I draped the edges with towels to avoid that happening.
Again the fix was easy and very straight forward from the video. No extra pearls of wisdom here.
Total...
Read more
More
$152.66
- Compare At:
-
$181.67
- You Save:
-
$29.01
Genuine Samsung part
By: Samsung
Part Number: DC64-00519D
Washer won't start or shows door lock error? This door lock switch keeps the door secured during wash cycles. DIY repair in 15-20 minutes with video.
Do-It-Yourself Stories from Customers like You
Part holding door shut broke. Richard B. • Schwenksville , PA • April 04, 2014
First I took off the spring loaded wire ring holding down the seal to the door with needle nose pliers. Pulled back the seal. Removed the 3 screws holding the part on the front of the washing machine. Slid the piece out. Took the protector guard off the off piece and unplug the wires. Put the wires into new part. Put the protector on the new part. Slid the part back into place. Screwed it back in. Put the seal back on. Put the wire spring loaded ring back around the seal. Total time 15 minutes...
Read more
More
$171.95
- Compare At:
-
$204.62
- You Save:
-
$32.67
Genuine Samsung part
By: Samsung
Part Number: DC90-10128N
Fix tE error codes with a new water temperature thermistor. This sensor monitors wash water temp. DIY-friendly repair takes under 10 minutes.
Do-It-Yourself Stories from Customers like You
Te code error Michael H. • Blue Springs , MO • August 08, 2014
I first check the schematics to find the heat sensor. On my model it's c on the control panel. I checked the continuity on the orange and white wires. It showed some continuity but not much. I then went to the heater element and found the orange and white wires going to the thermistor. Turns out the heater element and thermistor need repalced.
Read more
More
$48.95
- Compare At:
-
$57.76
- You Save:
-
$8.81
Genuine Samsung part
By: Samsung
Part Number: DC96-01703G
Fix 4E error codes and drainage issues with this water level pressure switch. Common when washer drains unexpectedly or won't spin properly.
Do-It-Yourself Stories from Customers like You
Hose was damaged (error code 4e) Matthew M. • Clayton , NC • May 04, 2018
Removed top panel to reach the hose and sensor. Propped the washer back, reached up to remove bottom hose assembly. Replaced with new hose and new sensor. Put top panel back on.
Parts place told me the part was backordered for months and repair would cost at least $80. Got it in three days and fixed it myself.
Read more
More
$65.95
- Compare At:
-
$77.82
- You Save:
-
$11.87
Genuine Samsung part
By: Samsung
Part Number: DC62-00299A
Fix ND error codes and drainage issues with this washer check valve. Prevents backward water flow in drain pump. DIY-friendly repair with video guide.
Do-It-Yourself Stories from Customers like You
Hose and check valve Kayed M. • Orland Park , IL • February 17, 2020
Washer said error no drain. Cleaned the filter and still no drain. So the next step was to check
the hose for any debris and when I went to pull the hose off it broke, at the same time I found the check valve flap broke in the drain pump and it was blocking the hose. So I replaced the check valve on the drain pump and replaced the hose.
Read more
More
$7.78
- Compare At:
-
$8.97
- You Save:
-
$1.19
Genuine Samsung part
By: Samsung
Part Number: DC31-00112A
The washer motor rotor assembly is the outer rotating component of a direct-drive washer motor that works with the stator to generate the electromagnetic force that spins the wash basket. It is a core part of the motor system that drives both the wash and spin cycles. Replace this part if your washer won't spin or agitate, makes a loud grinding or humming noise during a cycle, or if the machine shakes excessively during operation.
This part fixes the following symptoms
-
Will not agitate
-
won't spin
See more...
Do-It-Yourself Stories from Customers like You
3C error code George W. • Glen Burnie , MD • October 18, 2019
Actually, I am returning your parts. THERE IS NOTHING WRONG WITH THEM! My wife actually found out that we had a warranty on our washer that we didn't know about. But, I can comment that I did chat with your customer service and you guys were very helpful.
Read more
More
$197.95
- Compare At:
-
$235.56
- You Save:
-
$37.61
Genuine Samsung part
By: Samsung
Part Number: DC61-02427D
The Washer Liquid Soap Dispenser Tray is an essential component for maintaining the efficiency of your Samsung washer. This genuine OEM part is specifically designed to hold and dispense liquid detergent accurately, ensuring that each laundry cycle receives the right amount of soap for optimal cleaning performance. Crafted with durability in mind, the dispenser tray withstands regular use and resists cracking or leaking, providing a long-lasting solution for your appliance. Installing the Washer Liquid Soap Dispenser Tray is straightforward, making it an ideal choice for DIY repairs. Its precise fit guarantees seamless integration with your Samsung washer, restoring the functionality of the liquid soap dispensing system without any complications. By replacing a damaged or malfunctioning tray with this genuine OEM part, you enhance the overall performance of your washer and extend its lifespan. Compatible with a variety of Samsung washer models, this liquid soap tray offers reliable and consistent detergent delivery, helping you achieve cleaner, fresher laundry with every wash. Choose the Washer Liquid Soap Dispenser Tray for a dependable and efficient solution to keep your washer operating smoothly.
Do-It-Yourself Stories from Customers like You
Detergent cup full of water at end of cycle Daniel M. • Tinley Park , IL • May 06, 2016
Replaced with new Detergent cup and fill cap. Cup symphony perfectly. Simple fix for frustrating problem.
Read more
More
$28.78
- Compare At:
-
$34.25
- You Save:
-
$5.47
Genuine Samsung part
By: Samsung
Part Number: 6002-000213
The Refrigerator Screw-Tapping is an essential component for maintaining your Samsung refrigerator's functionality. This genuine OEM part ensures precise threading, allowing screws to be securely fastened without damaging the surrounding materials. Designed specifically for Samsung refrigerators, it guarantees a perfect fit and reliable performance. Whether you are replacing a damaged screw-tapping or performing a repair, this Refrigerator Screw-Tapping simplifies the process, saving you time and effort. Its high-quality construction provides durability and long-lasting support for your appliance. By choosing the Refrigerator Screw-Tapping , you ensure your refrigerator remains sturdy and functional, enhancing its overall lifespan. This genuine OEM part is easy to install and seamlessly integrates with your existing setup, making it an ideal choice for DIY repairs. Trust in the quality and compatibility of this Samsung part to keep your refrigerator operating smoothly and efficiently.
Do-It-Yourself Stories from Customers like You
Dryer would not start. John K. • Lawrenceville , GA • November 03, 2017
The start button had been tricky to use. You had to push it in just a certain way to get the dryer to start. Eventually it was non-responsive. All other controls worked and there was no error code displayed. The repair was to replace the whole control board which cost around $100. Heavy sigh..
Be sure to keep track of all your screws.
BTW it was not the thermal fuse. All the online videos say this is the first thing to look for when the dryer will not start. Be sure to check with the person...
Read more
More
$6.41
- Compare At:
-
$7.56
- You Save:
-
$1.15
Genuine Samsung part
By: Samsung
Part Number: DC67-00467A
Hose assembly that connects the detergent dispenser drawer to the tub. Replace if cracked, leaking, damaged, or causing water flow issues from dispenser.
Do-It-Yourself Stories from Customers like You
The control assembly broke where the dispenser is located. The dispenser housings hose was leaking, which was damaged from the loose dispenser housing John W. • Stewartsville , NJ • April 27, 2020
I replaced the control panel and the dispenser housing hose. The unit is no longer leaking.
Read more
More
$55.63
- Compare At:
-
$66.20
- You Save:
-
$10.57
Genuine Samsung part
By: Samsung
Part Number: 6009-001522
Replacement hex screw for dryers. Fastens internal components securely in place. Order when original screws are stripped, missing, or lost during repair.
More
$14.14
- Compare At:
-
$15.55
- You Save:
-
$1.41
Genuine Samsung part
By: Samsung
Part Number: DC67-00444A
The Washer Max Fill Cap is designed to regulate the maximum water level in your Samsung washer. This genuine OEM part ensures that your appliance fills with the optimal amount of water for each wash cycle, enhancing cleaning efficiency and conserving water. By maintaining the correct fill level, the Max Fill Cap helps prevent overfilling, which can lead to leaks or excessive water usage. If your original fill cap is damaged or worn, replacing it with this genuine OEM part restores your washer's performance and reliability. Installation is straightforward, allowing you to quickly restore your washer's functionality without hassle. The Washer Max Fill Cap is compatible with a range of Samsung washer models, providing a reliable solution for maintaining your appliance's efficiency. Using this genuine OEM part ensures that your washer continues to operate smoothly, meeting Samsung's high-quality standards. Trust in the Washer Max Fill Cap to deliver lasting durability and consistent performance, keeping your laundry routine running seamlessly.
Do-It-Yourself Stories from Customers like You
Detergent cup full of water at end of cycle Daniel M. • Tinley Park , IL • May 06, 2016
Replaced with new Detergent cup and fill cap. Cup symphony perfectly. Simple fix for frustrating problem.
Read more
More
$14.14
- Compare At:
-
$15.55
- You Save:
-
$1.41
Genuine Samsung part
By: Samsung
Part Number: DC97-17022B
Replace your washer's detergent dispenser cup when tabs break or the cup is missing. Snaps into place in the detergent drawer. Verify fit with your model.
Do-It-Yourself Stories from Customers like You
Misplaced the liquid detergent cup Melissa B. • South Lake Tahoe , CA • June 23, 2019
Bought the replacement part and dropped it in the detergent drawer! - very easy!
Read more
More
$21.95
- Compare At:
-
$26.12
- You Save:
-
$4.17
Genuine Samsung part
By: Samsung
Part Number: DC61-10673A
If water pools under your washer or drains slowly, a damaged drain cap may be the cause. This cap prevents leaks and controls water flow during cycles.
Do-It-Yourself Stories from Customers like You
He unit would shake like it was off balance Bernard M. • Lebanon , OR • November 24, 2015
At first I thought it was the bearing, but when I got it apart I found the main shaft had corroded from possibly the soap powder and bleach combo build up on the part.
After I cleaned it all up I found one of the three mounting braces was cracked and causing the unit to shake during the spin cycle.
Once I replaced that part and replaced a few missing parts I lost all found on your store the unit went together just as it came apart and works excellent.
Read more
More
$5.50
- Compare At:
-
$6.54
- You Save:
-
$1.04
Genuine Samsung part
By: Samsung
Part Number: DC61-01257N
The Washer Suspension Spring Hanger is designed to ensure the smooth and stable operation of your Samsung washer. This essential component supports the drum, helping to absorb vibrations and reduce noise during the wash cycle. Crafted as a genuine OEM part, it guarantees a perfect fit and reliable performance for your appliance. Installing the Washer Suspension Spring Hanger can extend the lifespan of your washer by maintaining optimal balance and preventing excessive wear on other parts. Compatible with various Samsung washer models, this suspension spring hanger is easy to replace, allowing you to restore your washer's functionality quickly and efficiently. By choosing this genuine OEM part, you ensure that your washer operates just as it was designed to, providing you with consistent and dependable washing results. Whether your original spring hanger is broken, worn out, or missing, the Washer Suspension Spring Hanger is the perfect solution to keep your Samsung washer running smoothly.
Do-It-Yourself Stories from Customers like You
Loud noise and quit working. Eric T. • Mesa , AZ • February 12, 2024
Disassembled panels and removed door, replaced the top stabilizing spring for the washer tub.
Read more
More
$60.95
- Compare At:
-
$73.14
- You Save:
-
$12.19
Genuine Samsung part
By: Samsung
Part Number: DC97-12534K
Replace your washer's drain hose assembly to restore proper water drainage and prevent leaks. Fits select front-load washer models. Verify compatibility.
More
$60.95
- Compare At:
-
$72.53
- You Save:
-
$11.58
Genuine Samsung part
By: Samsung
Part Number: DC92-01982B
Drum won't turn or cycles stall? This washer motor inverter board regulates power to the drive motor, controlling speed and direction for all wash cycles.
Do-It-Yourself Stories from Customers like You
Would not wash. Jerry B. • Summit , MS • November 02, 2020
Ordered new board
Read more
More
$277.95
- Compare At:
-
$330.76
- You Save:
-
$52.81