Poulan Parts

This 50-inch blade is made for use with riding lawn mowers by Craftsman and Husqvarna. The blade is the component that is responsible for cutting grass or other foliage when the lawnmower is in use. The blade can become worn over time and will leave grass with frayed edges. If the blade is worn out, it will need to be replaced to create a healthier-looking lawn. Replacing the blade will create a clean cutting edge after regular use of a lawnmower.If the mower blade needs to be replaced, a pair of pliers, a socket set, and a wrench set will be required. Place the lawnmower on a stable surface and pull up the blade deck for better access to the 50-inch blade. Take out the blades and the sheared pins before replacing them with new components. Reassemble the deck and test the lawnmower before use.This is an authentic OEM replacement component that is directly sourced from the manufacturer. It is sold as a single part. The 50-inch blade is made to be used in several lawn mowers and lawn tractors manufactured by Husqvarna and Craftsman.

This is a genuine OEM mandrel kit with a nut that is sourced directly from the manufacturer. It is designed for use on lawnmowers, tractors, and other outdoor lawn and garden equipment. The mandrel is responsible for spinning the blades on lawn mowers. It is part of the deck and can be a safety issue if not properly attached or if broken. If the spindle is broken or bent during use, it is apparent by uneven cutting, loud squealing, or vibrations, and buzzing sound. Mandrel replacement should be on a flat service for safety. If the mower is hot, allow it to cool before making repairs. Remove the spark plug and empty the gas tank. If the deck on the mower is removable, remove it before jacking the mower up. Once the mower is in the air, remove the blades to access the spindle. Remove the spindle. This is an excellent time to check the bearings and replace them if needed. Install the new spindle. Reinstall the blades. Lower the mower and if the deck was removed, reinstall the deck. This mandrel kit is made of high tensile metal; it comes with the nut for installation; it is sold as an individual unit. This mandrel kit is compatible with lawn mowers manufactured by Husqvarna Poulan, Weed Eater, and Ryobi.

Replace your worn, bent, or dull riding mower blade. This 21-inch high lift blade installs on the deck to cut grass and improve bagging performance.

Idler pulley for riding mower tractors. Installs on the deck or drive belt system. Replace if cracked, worn, or causing belt misalignment issues.

This replacement part is a V-belt. It is a genuine replacement part made by Husqvarna. This specific belt is typically found near the engine of many types of lawnmowers. V-belts work together with the transmission of the machine.A new V-belt might be needed if the user hears unusual noises coming from inside the machine. This can mean that the belt is stretched out or torn from years of normal use. It is also possible that the belt is damaged in other ways and is unable to perform the movements needed. As this part is close to the engine, be sure the appliance is completely turned off before starting this repair. This belt is a genuine OEM replacement part. Note that it is sourced directly from the manufacturer and is also sold individually.

Ground drive belt connects transaxle to engine crankshaft for rear wheel power. Replace when worn, stretched, or broken. Verify fit with your model number.

Won't start or stops running? This riding mower ignition switch controls power to the engine. Common fix for no-start issues. Easy DIY replacement.

Mower won't stop or squeals when braking? This brake pad creates friction against the rotor to safely stop your riding mower. Direct replacement part.

This is a genuine replacement drive belt that is manufactured for use in select riding lawn mowers that feature double idler pulleys. This belt is specifically used on models that feature a 38- or 42-inch deck. Its job is to use the pulleys to engage and drive the cutting blades on the mower deck. Belts are subject to repetitive motion and high heat, which can cause them to crack or corrode, or even snap entirely. Replacing belts is typically considered a part of lawn mower maintenance, but some owners choose to keep an extra belt on hand in case of emergencies. Belts can also become stretched with excessive use, causing them to slip and lead to poor cutting performance. This is a genuine OEM drive belt from Husqvarna. It is compatible with select mowers from Poulan, Craftsman, and Husqvarna and fits more than 150 different models. It is made of durable rubber and will require a screwdriver or pry bar to install. Always be sure to disengage the engine and allow it to cool before performing any repairs. It is a good idea to secure the mower wheels when working under the deck, as well. This belt is sold as an individual unit and does not include any additional components.

This is an idler pulley. It is a genuine Husqvarna part. It is a replacement part for lawn tractors and riding mowers. The idler pulley allows the engine to start by applying tension to the blade belt. It is not uncommon for the pulley to become damaged through normal wear and tear, and it can also be damaged in an accident. If this happens, the machine may not start properly or at all. Check the user manual for instructions for replacing it. Some disassembly of the mower deck may be required. Be sure to allow the engine to cool completely, empty the fuel tank, and disconnect the spark plug before attempting any repair.This pulley is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. It is made to be compatible with mowers and tractors manufactured by Husqvarna, Craftsman, and Poulan.

Mulching blade for walk-behind lawn mowers. Replaces worn, bent, or dull blades that no longer cut effectively. Installs on the mower deck spindle.

Replacement brake return spring for lawn tractors and riding mowers. Installs on the brake assembly to restore proper brake release function when original is broken, stretched, or missing.

Oil drain tube assembly for lawn tractors and riding mowers. Installs under engine for oil changes. Replace if cracked, leaking, or missing clips.

Front rim assembly for riding mowers. Holds the tire and tube, attaches wheel to spindle. Replace if original is cracked, broken, or damaged.

Primary drive belt for 50-inch riding mower tractors. Replace when you notice slipping, squealing, or reduced power transfer. Verify your model compatibility before ordering.

Replacement engine zone control cable for walk behind lawn mowers. Installs between control handle and engine zone. Replace if cable is frayed, broken, or damaged.