Need Help?
Call
A starter rope is wrapped around the recoil drum starter pulley. The starter spring creates tension for the rope to recoil. It is 2.25 inches in diameter on the outside of the pulley and 0.25 inches in diameter on the inside of the pulley. If the starter spring has gone bad, consider replacing the recoil drum starter pulley while repairing the other part. It may be that the damage of the starter spring has chipped the drum, or the drum may be worn from the friction of spinning as the rope uncoils and recoils. If the recoil drum starter pulley is damaged, it may not spin freely. This could prevent the engine from starting. The replacement of this part should be quick and easy and only requires a screwdriver and pliers to complete. The recoil drum starter pulley works with trimmers, hedge trimmers, pole saws and pruners, leaf blowers/vacuums, small engines, chipper shredders, edgers, tillers, and water pumps manufactured by Echo, Little Wonder, Mantis, and Shindaiwa brands. It is a genuine OEM part.
Usually ships within 4 - 14 days
This starter rope is designed for use with several lawn and garden tools, including as hedge trimmers. It is wrapped around the starter pulley and can be manually pulled on to get the engine to start up. After wear and tear or a lot of use, the rope can start to fray and weaken. Given more time, the starter rope will completely break and no longer be useable. Many people will realize the starter rope is broken when pulling on it and receiving a line of rope in their hands. If the starter rope is broken, it needs to be replaced. First, the spark plug needs to be removed to prevent the engine from powering on. Next, the starter rope can be removed from the guide. The engine cover and fuel tank will need to be removed, as well as the dipstick tube and blower housing. Next, the recoil spring should be rewound before threading the new rope into the pulley. This is an individual genuine OEM component that comes directly from the manufacturer for the highest quality. It can be used with Echo, Little Wonder, and Shindaiwa trimmers, chipper shredders, leaf blowers, and hedge trimmers. A replacement will require basic tools like screwdrivers and a socket wrench.
The choke shutter is a trimmer part that restricts the amount of air that flows into the engine. The choke shutter rests inside the carburetor, and is designed to help with the mixture of air and fuel that causes the combustion that starts the engine.If the choke shutter is not opening or closing properly, then the engine will not be able to start. The carburetor's temperature allows the engine to run, and in order to control the temperature, you will need a working choke valve. To install a new choke shutter, start by opening the carburetor inside of the trimmer's engine. This part can be replaced with a screwdriver or bolt extractor depending on what is holding the carburetor together. The choke shutter can then be replaced and tested to make sure it opens and closes properly. This genuine OEM choke shutter is durable and easy to install. It is made from durable metal and is sold individually.
Combustion engines use carburetors to manage the amount of air and fuel entering the chamber. However, to start some combustion engines, a choke is required. This part regulates the air pressure within the intake manifold. This effectively adjustes the air and fuel levels entering the engine, and allows more fuel to reach the inside to ensure that it starts easily. The choke valve is then opened as the machine runs. The choke is installed through a grommet that ensures a good seal, but the grommet can wear out over time. This replacement choke grommet is designed for an array of small engine machines, including pruners, trimmers, saws, and edgers made by Little Wonder and Echo. This OEM replacement part is sold individually and is made of long lasting rubber. It does not include any other components in the assembly.
This is a foam pad rests next to the oil outlet pipe on several types of lawn and garden equipment. It acts as insulation and can prevent excess vibrations while the equipment is in use. Over time, this foam pad can start to break down, rip, or become damaged and may need to be replaced. Replacing the foam pad on a chainsaw or other machine will require a wrench. The equipment will need to be disassembled so that there is access to the foam pad and the oil outlet pipe. The old component can be removed and the new one can be installed in the same location. Once the part is installed, reassemble the other components before using the tool again. A pair of work gloves is useful for making a replacement to the foam pad.This foam pad is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The foam pad is made to be used with Echo string trimmers, pole pruners, and chainsaws. This part is sold individually.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.