Parts for Kitchenaid KDFE454CSS4: 07 - Pump, Washarm And Motor Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Fix loud droning noise, poor cleaning, or groaning sounds. This dishwasher circulation pump and motor ensures water flows to spray arms. DIY repair in 45 min.

Replacement bracket that secures and supports internal dishwasher components. Install this support plate if your original is cracked, broken, or missing to restore alignment.

Fix dishes not cleaning or low spray arm pressure by replacing the water supply diverter. Directs water to upper and lower spray arms. Video guide included.

Fix dishwasher leaking water from underneath. The sump assembly houses the pump, filters, and seals that commonly fail causing floor leaks. DIY repair.

Quantity of ONE. Size: 8-18 x 5/8 inch. (#8 screw, 18 threads per inch, 5/8 inch long)

Traps food particles and debris during wash cycles to keep water clean. Replace if clogged, cracked, or dishwasher performance declines. Verify fit.

This lower spray arm directs pressurized water across the dishwasher's bottom rack to remove food and detergent residue. Replacing a warped, cracked or clogged spray arm helps restore proper water coverage for cleaner dishes. What it does:

• Rotates and distributes wash water across the bottom rack to remove stuck-on food and soil.
• Clogged or blocked spray holes reduce cleaning performance on the lower rack.
• Cracks, breaks, or worn mounting tabs prevent rotation or cause rattling noises.
• A loose or damaged arm can cause uneven cleaning or poor rinse results.

What's included: One lower spray arm. Install notes:

• Disconnect power to the dishwasher (turn off breaker) before servicing.
• Remove the lower rack to access the spray arm; most arms simply snap or press into place.
• Inspect mounting tabs and hub for damage; replace arm if cracked or worn.
• Reinstall securely and run a short cycle to ensure proper rotation and no interference.

Traps large food particles and debris to prevent pump clogs in your dishwasher. Replace when buildup causes poor cleaning or drainage issues.

Flexible tube connecting the drain pump motor to the sump in your dishwasher. Replace if cracked, leaking, or damaged to restore proper water drainage.

Fix leaking, loud humming, or grinding noises during drain cycles. This pump and motor assembly requires cabinet removal for installation.

Fix dishwasher leaking from the motor area with this motor to sump seal. Creates a watertight connection between pump and sump. Takes 10-20 minutes.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Factory #10-16 screw secures dishwasher panels, brackets, and covers. Replace worn, stripped, or missing screws to restore tight assembly.

This tab-sump mounting secures the dishwasher sump/dispenser area so detergent tabs and related components stay properly aligned. Replacing a worn or broken mounting restores correct dispenser positioning and helps prevent tabs from falling loose during c

Fix loud grinding or whirring noises and water not draining from your dishwasher. This drain pump removes water during the drain cycle. DIY-friendly repair.

Flexible drain hose carries wastewater from your dishwasher to the kitchen drain. Replace if cracked, leaking, burst, or damaged by wear or pests.

Dishes not cleaning evenly or spray arms not working? The diverter disc routes water to spray zones. Common issue, straightforward 5-10 minute fix.

The Diverter Motor is an OEM part for Whirlpool dishwashers controls the diverter valve, which directs water flow to various spray arms throughout the dishwasher during a wash cycle. By accurately adjusting the flow of water, the diverter motor ensures

This hose clamp secures dishwasher hoses to fittings and ports to maintain a tight, leak-resistant seal. Replacing a worn clamp helps prevent drips and loose connections that can cause water under the unit.

• Secures drain or circulation hose to t

The Turbidity Sensor is an OEM part for Whirlpool dishwashers. It detects the level of particles in the water during the wash cycle, allowing the dishwasher to adjust the cycle duration and water usage for optimal cleaning performance. This sensor ensu

Secures hoses and connections in your dishwasher to prevent leaks. Replace if corroded, loose, or worn. Verify fit with your model number before ordering.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.