Parts for Kitchenaid KDFE454CSS4: 06 - Tub And Frame Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Protective cover that encloses your dishwasher's control box and internal wiring. Replace if cracked, broken, or missing to shield electronics from dust.

Prevents water leaks around your dishwasher door. Replace if you notice pooling water on the floor or visible cracks in the seal. Verify fit by model number.

Dishwasher won't start or door won't close? The door latch strike creates a secure catch point for proper door latching. Easy DIY repair.

Size: 8-32 x 1/2 inch.

Seals the dishwasher tub to the cabinet opening, reducing noise and preventing gaps. Replace if worn, damaged, or missing for proper fit and sound control.

If your dishwasher door drops, slams, or feels heavy, the door balance mount may be broken. This side-frame bracket anchors the spring system.

Screw secures appliance panels and access covers. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattles or gaps.

Secures your dishwasher to the underside of the counter. Replace if bracket is broken, cracked, or missing to prevent the unit from shifting forward.

10-24 threaded machine screw secures panels, brackets, and internal assemblies in appliances. Replace missing, stripped, or damaged screws.

Protective shield component for your dishwasher interior. Replaces cracked, broken, or missing shields. Installs to guard sensitive components.

10-32 threaded machine screw secures dishwasher panels, trim, and brackets. Replace when missing, stripped, or damaged to restore proper fit.

Rear support wheel for dishwasher lower rack assembly. Replaces broken, cracked, or missing wheels that cause dragging or misalignment on the track.

Pronged cup washer secures and cushions components in dishwashers and microwaves. Replace when worn to restore stable fit and reduce wobble.

Replacement door balance spring for dishwashers. Provides tension so the door opens smoothly and stays in position. Needed when spring is rusted, broken, or stretched causing door to slam open or fall without resistance.

Replacement 8-32-thread screw used to secure panels, brackets and small components in compatible household appliances. Restores missing or stripped fasteners so panels and parts stay firmly attached during normal use. What it does:

• Secures trim, panels, brackets and control housings to maintain proper assembly.
• Replaces missing or damaged screws that can cause rattling, loose panels or misaligned components.
• Fits locations that require an 8-32 threaded fastener; correct length and head style for your application.
• Helps restore stable, vibration-free operation when worn or stripped fasteners are replaced.

• Disconnect power and water before servicing; wear eye protection and gloves.
• Use the correct screwdriver or driver bit to avoid stripping the screw head.
• Do not overtighten—turn until snug and secure to avoid damaging threads or surrounding parts.
• If the original used a washer or nut, reuse or replace as needed and the screw length and head type match the original.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Protects and conceals your dishwasher's electrical junction box. Replace if cracked, broken, or missing to keep wiring secure and restore a clean finish.

Door balance link kit for dishwashers. Connects door springs to control door movement. Replace if rope is frayed, broken, or plastic clips are cracked or worn.

Protective housing cap that encases the dishwasher thermostat. Replace if cracked, broken, or missing to properly shield temperature monitoring components.

Gasket for upper wheel.

This power cord connects your appliance to a household outlet. Replacing a worn or damaged cord restores safe, reliable power and can help resolve no-power or intermittent power issues caused by a compromised lead.

• Delivers electrical power from the outlet to the appliance
• Replaces cords with cracked, frayed, or heat-damaged insulation or a damaged plug
• Helps when the unit won't power on or loses power when the cord is moved
• Addresses visible scorching, arcing, or melting on the cord or plug

• Disconnect power before servicing; verify no voltage is present
• Note wire positions or take a photo before removal; match to the same terminals on install
• Use the proper strain relief/clamp and route away from sharp edges, moving parts, and heat sources
• Confirm the ground connection is secure; do not modify the plug

Secures the temperature sensor or thermostat to the dishwasher cabinet. Replace if the original bracket is cracked, broken, or missing hardware.

Fixes no heat during drying, wet dishes, or blinking sanitized light. This safety thermostat cuts power if water overheats. Moderate DIY repair.

Positions and supports the dishwasher tank assembly to maintain proper alignment. Replace if worn, cracked, or missing to restore correct spacing.

Spacer that mounts between dishwasher tank components to maintain proper alignment and reduce vibration. Replace if cracked, missing, or worn out.

Secures and aligns internal dishwasher components to prevent movement and noise. Replace if bracket is bent, cracked, or missing to restore stability.

The Wheel and Bracket Assembly is an OEM part for Whirlpool dishwashers. This assembly includes the wheel and bracket components that support and guide the dishwasher rack, allowing it to slide in and out smoothly. It ensures ease of access to load and unload dishes efficiently.

Over time, the wheel and bracket assembly can wear out or become damaged due to repeated use, heavy loads, or accidental impacts. Such issues can cause difficulty in maneuvering the dishwasher rack, leading to inconvenience and potential damage to the dishes or dishwasher.

Symptoms of a bad wheel and bracket assembly include:

• Difficulty sliding the dishwasher rack in or out
• The rack becoming misaligned or falling off its tracks
• Unusual noises when moving the rack
• Visible damage to the wheels or brackets

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This factory screw secures panels, brackets, or components within your appliance. Using the correct OEM fastener helps ensure a snug fit and prevents loosening, rattling, or misalignment over time.

• Fastens metal or plastic components to maintain proper alignment
• Helps prevent vibration, noise, and loosened parts
• Common wear item that can strip, rust, or go missing
• Replaces damaged or missing hardware to restore secure mounting

• Disconnect power and shut off water or gas before service
• Note original screw location and orientation for proper reassembly
• Start threads by hand to avoid cross-threading; do not overtighten
• If threads are damaged, inspect the mating hole or clip before reuse

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.