Range Heating Element

• Genuine OEM Part: Produced by Whirlpool for unmatched compatibility and reliability with Maytag and Magic Chef appliances.
• Spade Style Connections: Features secure spade terminals for easy electrical connections.
• Exact Fit: Sized at 16x16 inches with 2-inch deep terminals for a perfect fit in specific models.

Common Symptoms for Maytag Magic Chef Oven Bake Element WP7406P012-60:

• Oven not heating evenly or not heating at all
• Visible damage or breakage in the element
• Oven taking longer than usual to preheat
• Inconsistent baking results

Basic Troubleshooting for Maytag Magic Chef Oven Bake Element WP7406P012-60:

• Check for Visual Damage: Inspect the bake element for any signs of wear or damage. Look for blisters, breaks, or areas that might be discolored (typically a burnt orange or darker spots).
• Test for Continuity: Using a multimeter, test the element for continuity. A lack of continuity indicates that the element is faulty and needs replacement.

Installation Instructions for Maytag Magic Chef Oven Bake Element WP7406P012-60:

1. Ensure Safety: Disconnect power to the oven by unplugging it or turning off the circuit breaker.
2. Access and Remove the Old Element: Remove the oven racks for better access, unscrew the mounts, and gently pull the element forward to reach the terminals.
3. Disconnect and Replace: Detach the spade connectors from the old element and connect them to the new one. Secure the new element in place with the original screws.
4. Operational Test: After installation, reconnect power and briefly turn on the oven to ensure the new element functions correctly.

Burner won't heat or randomly stays on? This range heating element restores proper burner function. DIY repair takes about 30 minutes with basic tools.

Burner not heating or burned out? This 6-inch surface element restores cooking function. Easy plug-in installation takes minutes to complete.

This is a heating element designed for the warming drawer of a range. It provides low, consistent heat to keep food warm after cooking. Replace this element if your warming drawer no longer heats, heats unevenly, or has visible damage such as cracks or burn marks.

Oven not heating or broiling unevenly? This broil element restores proper top heating in your electric range. Common fix for uneven browning.

This broil shield is the oven's rear cavity panel that protects the oven back and nearby components from direct broiler heat. It helps channel heat for safer broiling and prevents heat damage to internal parts. What it does:

• Deflects direct broiler heat away from the oven back wall and components
• Helps maintain proper broiling performance by directing heat toward food
• Reduces risk of heat-related damage, discoloration, or premature wear on internal oven parts
• Limits grease and debris contact with sensitive rear components

• Disconnect power (and gas supply on gas ovens) before servicing the oven
• Remove oven racks and, if required, the broil element to access the shield
• Handle edges carefully—metal parts can be sharp
• Keep hardware removed during disassembly; screw locations for reassembly

This broil heating element provides the upper-oven heat for broiling and high-temperature cooking. Replaces a failed or damaged upper element to restore broil performance and even top-heat browning. What it does:

• Produces direct top-oven heat used for broiling and finishing dishes
• Restores broil function when the upper element no longer heats
• Helps eliminate uneven browning or food that won't crisp on top
• Shows visible signs of failure such as burning, breakage, or no heat

• One broil (upper oven) heating element

• Disconnect power (unplug or switch off breaker) before starting any work
• Handle element carefully to avoid bending or damaging terminals
• Electrical connections are secure and routed clear of interior surfaces
• After installation, restore power and test broil function; replace oven light cover or insulation as needed

Range not heating or baking unevenly? This bake element restores proper oven temperature. Common fix for no heat issues. Moderate DIY repair, 30-45 minutes.

If your oven won't broil or food isn't browning on top, the broil element has likely failed. This upper heating element restores direct heat for searing.

This is the broil heating element located at the top of the oven cavity, responsible for producing high, direct heat for broiling food. It is a looped metal element that glows red when energized. Replace this element if the broiler does not heat, heats unevenly, or if visible damage such as blistering, cracking, or burn-through spots are present.

This is a 180mm radiant surface induction element designed for use on a cooktop. It generates heat beneath the glass surface to cook food evenly. Replace this element if the corresponding burner no longer heats, heats unevenly, or fails to respond when turned on.

Fixes uneven browning or broiler not heating. This upper heating element restores high-heat broiling in electric ovens. Moderate DIY difficulty.

Warming drawer not heating? This heating element maintains food at serving temperature. Provides gentle, consistent heat to keep dishes warm until ready.

Oven not heating or baking unevenly? This range bake heating element restores proper cooking temperatures. Moderate DIY repair in 30-45 minutes.

Replace a hidden bake element when your oven won't heat properly or takes too long to preheat. This heating element restores even baking performance.