Range / Cooktop / Oven Knob, Dial & Button
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7733P526-60
Replaces a worn, cracked, or missing control knob on your range or cooktop. Attaches to the control shaft to restore burner and function selection.
Do-It-Yourself Stories from Customers like You
The knobs wore and broke on the stove Jennifer L. • North Hudson , NY • May 02, 2018
I popped them right on, they work perfectly.
Read more
More
$20.38
- Compare At:
-
$24.25
- You Save:
-
$3.87
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10160368
This is a control knob that fits onto the burner valve stem on the range cooktop, allowing you to adjust the flame or heat level of a surface burner. It is designed to grip the valve stem securely and features printed markings indicating heat settings. Replace this knob if it is cracked, melted, loose on the stem, or if the printed markings have worn off.
Do-It-Yourself Stories from Customers like You
Broken knobs wouldn’t turn on because plastic broke Charles H. • Monroe , WI • January 24, 2025
Replaced knobs with parts from appliancepartspro.com
Read more
More
$28.43
- Compare At:
-
$33.55
- You Save:
-
$5.12
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10268448
This is a control knob for a range surface burner, used to adjust the flame or heat level on the cooktop. It attaches to the burner valve stem on the front control panel. Replace this knob if it is cracked, broken, melted, or if the D-shaped shaft opening is worn out and the knob spins freely without engaging the valve.
Do-It-Yourself Stories from Customers like You
Bad stove top ignotor Arthur D. • Norco , CA • April 03, 2016
Replaced ignition harness
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Frigidaire part
By: Frigidaire
Part Number: 316544007
Replacement control knob attaches to the cooktop control stem to adjust burner heat levels. Replace if cracked, loose, melted, or missing for secure grip.
Do-It-Yourself Stories from Customers like You
Missing knobs on unit. Eric W. • Denver , CO • May 11, 2020
Ordered replacemement knobs for unit. Knobs fit exactly and took less than 2 minutes.
Read more
More
$54.95
- Compare At:
-
$64.84
- You Save:
-
$9.89
Genuine Whirlpool part
By: Whirlpool
Part Number: W10853029
Replace your range's surface burner control knob if cracked, stripped, or missing. Attaches to the valve shaft to control heat settings on your cooktop.
More
$28.43
- Compare At:
-
$33.83
- You Save:
-
$5.40
Genuine Whirlpool part
By: Whirlpool
Part Number: W11159631
Replaces a worn, cracked, or missing control knob on your gas range. Fits onto the control shaft to restore accurate setting selection and appearance.
More
$62.61
- Compare At:
-
$75.13
- You Save:
-
$12.52
Genuine Ge part
By: Ge
Part Number: WB03K10229
Replaces a worn, cracked, or missing temperature control knob on your range. Press-fits onto the thermostat shaft for smooth temperature adjustments.
More
$20.38
- Compare At:
-
$24.25
- You Save:
-
$3.87
Genuine Ge part
By: Ge
Part Number: WB03T10207
White control knob for electric range top burners. Replaces lost, cracked, or broken knobs. Installs on the control panel to operate surface heating elements.
Do-It-Yourself Stories from Customers like You
Lost knob Darryl A K. • Bethel , CT • April 20, 2015
AppliancePartsPros.com is a jem! I have yet to look for a part that this site doesn't have a top quality picture of. That makes it super easy to know I'm ordering the correct part, which they always have in stock!!
Read more
More
$22.53
- Compare At:
-
$27.40
- You Save:
-
$4.87
Genuine Ge part
By: Ge
Part Number: WB03T10332
This replacement control knob restores a secure, accurate feel when setting temperatures on your cooktop or range. Swap out a worn or broken knob to regain smooth, dependable control of your appliance's settings. What it does:
- Attaches to the valve or switch stem to select Off and heat levels
- Restores positive grip and precise adjustment when turning the control
- Common symptoms: cracked or stripped knob, wobbling/loose feel, missing knob, difficulty adjusting heat
- Helps ensure consistent, repeatable burner control
What's included:
Install notes:
- Disconnect power; shut off gas supply before servicing
- Pull the old knob straight off the stem—do not pry against the control panel
- Align the flat/D-shaped opening with the stem and press the new knob on fully in the Off position
- Test for smooth rotation and proper engagement
Do-It-Yourself Stories from Customers like You
Stem on 8 inch switch broken off and thus the knob was missing Thomas C. • Leesburg , FL • March 21, 2020
Watched the video and replaced it. Though I did one wire moving at a time, rather than pull all the wires off and then try to figure where they go. I did take a photo first though for backup, but did not need it.
Need the needle nose pliers to take connectors off the old one. Did not want to rip wire from fastener.
small Philips screw driver
Use small socket on a drill to remove the 4 screws from the rear panel.
took 5 minutes.
Read more
More
$31.26
- Compare At:
-
$36.89
- You Save:
-
$5.63
Genuine Ge part
By: Ge
Part Number: WB03X10136
Replace a worn or missing surface burner knob to restore smooth, accurate heat control. This black knob presses onto the surface element switch shaft so you can turn the element on and select cooking temperatures with confidence.
- Attaches to the surface element switch shaft to control On/Off and heat levels
- Replaces knobs that are cracked, stripped, loose, or missing
- Helps when the knob slips, won't stay on, or is hard to set accurately
- Black finish maintains the original appearance
What's included: 1 black surface burner control knob Install notes:
- Turn all controls Off and allow the cooktop to cool before servicing
- Pull the old knob straight off the switch shaft—do not twist or pry the shaft
- Align the new knob with the shaft and press straight on until fully seated
- Verify smooth rotation through the settings before use
Do-It-Yourself Stories from Customers like You
Ge profile ceramic cook top Dianna L. • Missouri City , TX • October 08, 2014
Just put the right knobs on to replaced the old ones.
Read more
More
$44.95
- Compare At:
-
$53.49
- You Save:
-
$8.54
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10156260
$59.48
- Compare At:
-
$70.78
- You Save:
-
$11.30
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY704918
Replace a cracked, broken, or missing burner control knob on your gas range or cooktop. Attaches to the valve shaft for smooth flame adjustment and control.
More
$35.95
- Compare At:
-
$42.42
- You Save:
-
$6.47
Genuine Whirlpool part
By: Whirlpool
Part Number: W11230929
Replace your range's control knob to restore the look and function of your cooktop. This knob installs on the control panel and may need replacement if cracked or worn.
More
$66.78
- Compare At:
-
$78.80
- You Save:
-
$12.02
Genuine Whirlpool part
By: Whirlpool
Part Number: W11544664
Replace a cracked, broken, or missing control knob on your electric range. This knob installs on the control panel to adjust temperature and functions.
More
$48.46
- Compare At:
-
$58.15
- You Save:
-
$9.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74011665
Replacement dual burner control knob for gas and electric ranges. Attaches to control shaft. Needed when original knob becomes cracked, stripped, or missing.
Do-It-Yourself Stories from Customers like You
Touchpad stopped working Christian T. • Seattle , WA • October 04, 2015
After doing much research online, I found out that the Touchpad on the JennAir downdraft gas range JGS9900BDS is very prone to "breaking." All my neighbors who has this model has reported that the touchpad stopped responding after a few years. Replacing was fairly simple.
1. Turn off the electricity to the range at the breaker
2. Pull the range out by an inch or two
3. On each side of the control panel, remove the screws.
4. Open the oven door and remove the 4 hex screws under the control...
Read more
More
$52.68
- Compare At:
-
$62.69
- You Save:
-
$10.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7733P184-60
Black surface burner control knob for gas ranges and cooktops. It fits onto the valve stem so you can turn the burner on/off and fine-tune flame level, restoring proper control and appearance when the original is worn or missing.
- Attaches to the surface burner valve shaft to control on/off and flame level
- Replaces knobs that are cracked, stripped, loose, hard to turn, or missing
- Restores clear pointer alignment for accurate settings
- Helps when the knob spins without engaging the valve
What's included: One black control knob Install notes:
- Turn all controls OFF, allow the cooktop to cool, and disconnect power to disable igniters
- Pull the old knob straight off the stem; align the new knob opening with the stem and press straight on until fully seated
- Verify the pointer aligns with the OFF marking before use
- Do not force the knob or use tools—forcing can damage the valve stem
Do-It-Yourself Stories from Customers like You
Knobs were missing Beth D. • Marshfield , MA • April 18, 2020
Installed knobs.
Read more
More
$46.35
- Compare At:
-
$55.16
- You Save:
-
$8.81