Range Door, Door Glass & Parts

This small, white oven door glass replaces a damaged viewing window on your appliance's door. Restore a clean look and safe visibility while helping the door contain heat and perform as designed.

• Serves as the door's viewing window and part of the multi-pane insulating system
• Replace if the glass is cracked, shattered, scratched, or permanently hazy
• Can help address poor visibility through the window or heat escaping from a damaged pane
• Safety-first: Broken tempered glass should be replaced promptly to avoid injury

• Disconnect power at the breaker (and shut off gas supply for gas units); allow the oven to cool completely
• Wear cut-resistant gloves and eye protection; handle tempered glass carefully
• Removing the door and laying it face-down on a padded surface can simplify the swap
• Transfer any trim/brackets from the old pane; do not overtighten screws and ensure gaskets/spacers are properly seated

Replace a cracked, shattered, or heat-damaged inner oven door pane with this heat-resistant glass. It restores proper insulation and visibility, helping your oven maintain temperature and protecting the door assembly from spills and high heat.

• Replaces the interior pane within the oven door assembly
• Helps retain heat for consistent cooking performance
• Shields the door liner and insulation from spills and steam
• Common signs it's needed: cracked/shattered inner glass, missing or loose pane, heat escaping, or the door exterior feeling hotter than usual

• Disconnect power or turn off gas and allow the oven to cool completely
• Remove the door per your model's instructions and place it on a padded surface
• Wear gloves; handle glass by the edges and avoid overtightening retainers
• Transfer any brackets, trim, or gasket from the original pane if your model uses them; before reassembly

Color: White

Approximate size: 19.3 x 12 inch.

This is the glass panel for the oven door. Replacing a damaged or clouded pane restores a clear viewing window and proper heat barrier so the oven can maintain temperature and you can monitor cooking safely. What it does:

• Forms the transparent window in the oven door and contributes to heat insulation
• Helps retain oven temperature for consistent baking and roasting
• Allows viewing of food without opening the door
• You may need this if the glass is cracked, shattered, permanently hazy, or you notice heat escaping around the door

• Disconnect power and let the appliance cool completely; wear cut-resistant gloves and eye protection
• Support or remove the door per the service manual and work on a padded surface
• Handle tempered glass carefully; avoid striking edges and do not overtighten fasteners
• Transfer and reuse any existing brackets, gaskets, and trim as required by your model

This is a replacement glass panel for the appliance's front panel. It restores a clean, durable surface and helps protect the components behind it when the original glass is cracked, chipped, or shattered.

• Forms the exterior glass surface on the appliance's front panel
• Helps shield underlying components from spills and impacts
• Restores proper fit and appearance when the original glass is damaged
• Common symptoms: visible cracks/chips, shattered glass, loose or rattling panel, missing glass

• Disconnect power; also shut off gas before servicing
• Wear cut-resistant gloves and eye protection; handle glass carefully
• Support the door or front panel during removal to prevent stress or drops
• Transfer and reuse existing trim, logos, gaskets, and hardware as designed; do not overtighten fasteners

Replacement glass panel for the oven door. It restores a clear viewing window and helps maintain proper insulation when the original glass is cracked, shattered, or discolored.

• Forms the see-through window in the oven door
• Contributes to the door's thermal barrier to help maintain set temperature
• Replace if the glass is cracked, shattered, fogged, or has sharp edges
• Improves visibility and refreshes the appliance's appearance

• Disconnect electrical power; shut off gas supply for gas ranges
• Allow the oven to cool completely; wear cut-resistant gloves and eye protection
• Support the door and remove it if required; transfer any trim/retainers from the old glass
• Handle glass by the edges only and avoid overtightening fasteners during reassembly

This replacement door glass restores a clear viewing window and proper insulation on your range or wall oven. Replacing a damaged panel improves safety, appearance, and temperature stability so you can cook with confidence. What it does:

• Forms the exterior viewing window of the oven door and shields inner door layers
• Helps contain heat for consistent baking performance
• Replace if cracked, shattered, scratched, cloudy, or missing
• Common signs include visible damage, rattling glass fragments, or heat escaping around the door

• 1 door glass panel

• Disconnect power; for gas units, also shut off the gas supply
• Remove the door per your model's instructions and place it on a padded work surface
• Wear cut-resistant gloves and eye protection; handle glass carefully to avoid chipping edges
• Transfer any required brackets or trim from the old panel and ensure the door seals and latches properly after reassembly

The Glass-Door is an OEM part for Whirlpool ranges. It serves as the transparent oven door that allows for viewing of contents without opening it. 

Causes of a bad glass door can include wear and tear over time from repeated heating cycles, thermal shock from temperature fluctuations, cracks or breaks due to impact, and stress from constant cleaning.

Symptoms of a bad glass oven door include:

• Reduced visibility due to cracks, scratches, or clouding of the material
• The door not sealing properly, resulting in heat loss and inconsistent oven performance  
• Sagging or misaligned installation that compromises safety
• Broken or missing door components that prevent proper closing and latching

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement door glass restores a clear viewing window and the structural integrity of your appliance door if the original glass is cracked, shattered, or damaged. It helps keep operation safe while returning the door to a like-new appearance. What it does:

• Forms the transparent viewing window in the appliance door
• Helps maintain proper door integrity and safe operation
• Restores visibility into the cavity during use
• Replaces cracked, chipped, loose, or shattered glass

• 1 door glass panel

• Disconnect power and allow the appliance to cool completely before servicing
• Wear cut-resistant gloves and eye protection when handling glass
• Support the door; some models require removing the door to access the glass
• Transfer any brackets/trim from the old glass and avoid overtightening fasteners

This is the outer glass panel for the oven door. Replacing a cracked or shattered exterior pane restores a safe, clean-looking door surface and helps protect the inner window and insulation from damage. What it does:

• Forms the front layer of the oven door and shields the inner window/insulation
• Provides a smooth, easy-to-clean exterior surface and finished appearance
• Helps maintain proper door integrity when the original glass is broken or missing
• Common symptoms include cracked or shattered glass, loose/rattling trim, or sharp edges on the door exterior

• 1 outer oven door glass panel

• Disconnect power; for gas ranges, also shut off the gas supply
• Allow the appliance to cool completely before service
• Wear cut-resistant gloves and eye protection; handle tempered glass carefully
• Support or remove the door; transfer handle/trim and reuse original hardware; do not overtighten fasteners

This oven door glass panel restores a clear, safe viewing window on your range when the original is damaged. Replacing a cracked or shattered pane helps keep heat contained, maintains visibility, and returns the door's appearance.

• Forms the glass window in the oven door to allow viewing while helping contain heat
• Replace if cracked, shattered, loose, or missing to avoid safety risks and heat loss
• Damage can contribute to longer preheat times or poor temperature retention
• Rattling, spiderweb cracks, or sharp edges are common signs it needs replacement

• Disconnect power or switch off the breaker; allow the appliance to cool completely
• Remove the oven door and place it on a padded, stable surface
• Transfer any trim, brackets, handle, and gasket from the original panel; reuse existing screws
• Handle glass with cut-resistant gloves; do not overtighten fasteners; verify door alignment and seals before use

This replacement oven door window glass restores a clear view into the cavity and the integrity of the door assembly. Install a new pane when the original is cracked, shattered, or permanently stained to maintain safe viewing during cooking.

• Provides the transparent viewing panel in the oven door
• Helps restore door integrity when used with existing trim and gaskets
• Replace for visible cracks, chips, shattering, or persistent staining/cloudiness
• Resolve rattling or loose window conditions

• Disconnect power and allow the oven to cool completely
• Remove the door and place it on a padded surface
• Wear cut-resistant gloves and eye protection; handle glass edges carefully
• Transfer any trim/brackets from the old pane; avoid overtightening fasteners and clean fingerprints before reassembly

This replacement glass assembly restores a clear, safe viewing window and proper door integrity. Replace when the original pane is cracked, shattered, or delaminated to keep the appliance operating safely and as designed. What it does:

• Forms the transparent window in the door for viewing the interior
• Helps maintain proper door integrity and performance
• Replace if glass is cracked, shattered, loose, or excessively hazy
• Common symptoms: visible cracks, rattling/loose pane, sharp edges, loss of visibility

• 1 glass assembly

• Disconnect power before service; if applicable, turn off gas supply
• Allow unit to cool completely; wear cut-resistant gloves and eye protection
• Support the door/panel during removal to prevent stress on hinges or glass
• Transfer any model-specific brackets or trim from the original, tightening fasteners evenly without overtightening against glass

This is a single piece of glass, you must reuse the window frame.

Color: Stainless