Range Latch, Catch, Lock Parts

Microwave door won't stay closed or latch properly? This door latch assembly restores secure closure and proper alignment. Easy DIY repair.

This rear door latch assembly secures the oven door during the self-clean cycle by engaging a motorized lock mechanism. It includes the latch motor and switch components that communicate with the control board. Replace it if the oven door won't lock or unlock, the self-clean cycle won't start, or you receive a door lock error code.

Range door won't stay closed or latch properly? This door latch assembly secures your oven door in the closed position for safe, normal operation.

Fix a wall oven that won't lock or run self-cleaning cycles with this door latch assembly. Essential safety component. Moderate DIY difficulty.

Oven door won't stay closed or lock during self-clean? This door latch secures your oven door and engages during cleaning cycles. Simple repair.

Fix an oven door that won't lock or unlock during self-clean cycle. This latch motor controls the door lock mechanism. Moderate DIY repair in 30-45 minutes.

Fix a range door that won't stay closed or lock properly with this door latch assembly. Restores secure closure and oven lock function on most ranges.

A mechanical latch component located on the oven door frame that catches and secures the door handle mechanism when the door is closed. It ensures proper door sealing and safe operation during cooking. Replace if the oven door won't stay closed, doesn't seal properly, or the handle feels loose or doesn't catch securely.

This door latch assembly secures the door closed and signals the control that it's safely shut, allowing cycles to start and run. Replacing a worn latch restores a reliable safety interlock and consistent operation.

• Secures the door and engages the safety interlock so the appliance can operate
• Sends a "door closed" signal to the control
• Common symptoms: door won't latch or stay closed; unit won't start or pauses as if the door is open; intermittent operation when the door is bumped; visible wear or damage to the latch
• Helps prevent nuisance "door open" indications

• Disconnect power before servicing
• Access the latch from the door area; remove inner panel or trim as required by your model
• Note wire positions, transfer connectors, and mount the new latch in the same orientation
• Test door closure before reassembly

Microwave door won't close or latch properly? This door latch assembly secures the door during operation, allowing cycles to start and run safely.

Oven door won't close or stay shut? This door strike latch engages the catch to keep your oven door secure. Simple fix for worn latches.

A replacement motor latch that secures the motor assembly to the appliance chassis, helping keep the motor stable during operation for smoother performance and reduced vibration. Fits specific Frigidaire/WCI motor assemblies. What it does:

• Secures and positions the motor assembly to prevent excessive movement
• Helps reduce vibration and rattling caused by a loose motor mount
• Restores proper alignment between motor and drive components
• Can eliminate intermittent contact-related noise from a shifting motor

• Disconnect power (unplug or switch off breaker) before starting any repair
• Installation typically requires accessing the motor area—expect to remove panels or the cabinet
• Keep track of mounting hardware; replace any damaged fasteners
• Test operation after reassembly; stop and recheck if noises or vibration persist

This is a door latch assembly that secures the oven door in the closed and locked positions during self-cleaning cycles and normal operation. It includes the latch mechanism and associated mounting hardware. Replace this assembly if the oven door won't lock during self-clean, the door won't stay closed, or if you receive an error code related to the door lock.

Fix an oven door that won't close or latch properly with this push-release door latch assembly. Direct fit for electric wall ovens and ranges.

Oven control panel won't lock or latch properly? This panel lock secures the control panel assembly in place. Common DIY repair, moderate difficulty.