Refrigerator Touch Pad

The Dispenser Overlay is an OEM part for Whirlpool refrigerators. It is a component that covers and protects the control panel and buttons of the dispenser on the fridge. It provides a protective barrier against dust, moisture, and every day wear and tear, helping to maintain the appearance and functionality of the dispenser.

Causes of a damaged or worn-out dispenser overlay can include regular use over time, accidental spills or scratches, or exposure to harsh cleaning chemicals. These factors can lead to a faded or unreadable display, a sticky or unresponsive touchpad, or an unattractive appearance.

Symptoms of a bad dispenser overlay may include:

• Faded or illegible display on the control panel
• Unresponsive or sticky buttons on the dispenser
• Visible damage, scratches, or discoloration on the overlay

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Restore reliable button response on your refrigerator's control panel. This control keypad registers your selections and sends them to the electronic control so features and settings respond consistently. What it does:

• Provides the button interface for the refrigerator's control panel
• Sends selection signals to the main control board
• Failure can cause dead or stuck buttons, erratic inputs, or no response
• Common symptoms include unresponsive controls, intermittent operation, or unintended changes

• 1 control keypad

• Disconnect power to the refrigerator before servicing
• Carefully remove the control panel/trim to access the keypad; avoid prying damage
• Note connector orientation and avoid creasing the flex cable; seat the connector fully
• Restore power and test all buttons before final reassembly

Note: Includes PCB Display

This electronic control board replaces the appliance's console control module to restore normal user interface and electronic function. It manages timed cycles, user inputs and sends signals to the main components for correct operation. What it does:

• Interprets button/knob inputs and runs selected cycles or modes
• Sends control signals to heating, motor, valve or compressor circuits as required
• Helps correct symptoms like unresponsive controls, failure to start, or erratic cycle behavior
• Replaces a failed or damaged console control to restore reliable electronic control

• One electronic control board

• Disconnect power before servicing to avoid shock or damage
• Handle the board by its edges and avoid touching components or connectors
• Verify connector locations and wire routing matches the original during reassembly

Control panel overlay that replaces worn, faded, or damaged printed labels on the console. Restores readable button markings and a factory look while protecting the underlying control surface from everyday wear. What it does:

• Replaces the printed graphic layer on the console so buttons and settings are easy to read.
• Protects the control surface from scratches, spills and wear.
• Helps resolve symptoms like faded or peeling labels and unclear button legends.
• Maintains the original appearance and layout of the control area.

• Disconnect power (unplug or switch off breaker) before servicing the appliance.
• Remove the console or trim carefully to avoid damaging switches, clips or wiring; adhesive may need to be softened or cleaned.
• Handle the overlay by the edges to avoid fingerprints on the printed surface; use appropriate cleaners and let adhesives fully set before reuse.

This HMI assembly is the user-interface control panel that lets you operate the appliance's front controls and display. Replaces a damaged or unresponsive control surface to restore button and display functionality. What it does:

• Provides the push-button controls and display interface for operating the appliance.
• Sends user commands to the main control board for functions like cycle selection, options, and start/stop.
• Commonly replaces units that are cracked, have unresponsive buttons, or show display errors.
• Helps resolve intermittent or failed front-panel communication when the HMI is the diagnosed fault.

• High-level replacement only; refer to factory service literature for step-by-step procedures.
• Disconnect power to the appliance before servicing to avoid shock or damage.
• Handle the assembly carefully to avoid damaging connectors, ribbon cables, or the display lens.

This membrane switch is the flexible button panel that sits under the appliance control bezel, restoring responsive push-button input and clear button labels for the control console. It's a direct-fit replacement for a worn or damaged keypad surface. What it does

• Registers user button presses and sends input to the appliance control board.
• Replaces cracked, faded, or unresponsive keypad areas that no longer activate functions.
• Helps resolve intermittent or failed button responses when the keypad is the root cause.
• Restores correct tactile feel and button alignment under the front bezel.

• Disconnect power or unplug the appliance before beginning any service.
• Remove the control bezel or console to access the membrane; handle the thin membrane carefully to avoid creases or damage.
• Align the membrane over the control board and seating posts, then reassemble the bezel; ensure any adhesive or locating tabs are correctly positioned.

This control box is the electronic control assembly that manages appliance functions and user inputs, restoring normal control response and cycle operation. It replaces a failed or unresponsive control module to help the appliance run correctly. What it does:

• Houses the main control circuitry that sends and receives signals for cycles, timers, and user commands
• Replaces a control box that causes unresponsive buttons, error codes, or intermittent operation
• Restores proper communication between the user interface and internal components
• Helps stop erratic cycles, failure-to-start issues, or unexpected shutdowns when the control is defective

• One control box (electronic control assembly), as shown

• Disconnect power before servicing to avoid electric shock; verify power is off at the breaker
• Handle the board and connectors carefully to avoid static or physical damage
• Confirm connector locations and reinstall any mounting hardware in original positions

This HMI assembly is the user interface/control panel that operates the dispenser and display functions on compatible refrigerators. Replaces a worn or non-working control/display assembly to restore input and visual feedback. What it does:

• Provides the front-facing display and touch/press controls for dispenser and temperature settings
• Sends user commands to the refrigerator's main control board for functions like dispensing and settings changes
• Commonly replaces assemblies when the display is blank, unresponsive buttons, or incorrect/disappearing indicators
• Restores normal control and feedback when original panel is cracked, worn, or electrically failed

• One HMI assembly (control panel/display)

• Disconnect power before starting to avoid shock or damage
• Handle ribbon cables and connectors gently; ensure connectors are fully seated during reassembly

This control case assembly is the outer housing that holds and protects the refrigerator's control board and user interface, restoring a secure mounting and clean appearance. It replaces cracked, broken, or missing control housings on compatible units. What it does:

• Secures the control board and interface components to prevent movement and electrical contact
• Protects electronics from moisture, dust, and accidental impact
• Restores proper alignment for buttons, knobs, or display panels for reliable user operation
• Helps resolve symptoms such as loose or wobbly controls, exposed circuitry, or a damaged control bezel

• Always unplug the appliance before starting work to reduce risk of shock
• Handle the control board and connectors carefully; avoid touching circuit contacts
• Remove any trim or access panels as needed; keep and reuse original screws and fasteners