General Electric Refrigerator Touch Pad

The Refrigerator Dispenser Trim is an OEM part for GE refrigerators. This trim piece is designed to fit around the dispenser area, providing a finished look and protecting the edges of the dispenser opening.

Causes of a bad dispenser trim can include wear and tear from regular use, accidental damage, or exposure to moisture that can cause discoloration or warping.

Symptoms of a bad dispenser trim include:

• Cracks or visible damage on the trim
• The trim becoming loose or detaching from the dispenser area
• Discoloration or warping of the trim piece
• Sharp edges or gaps around the dispenser opening

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is an ice chute and funnel assembly for refrigerators with ice dispensers on their doors. The chute opens upon the user's command input and releases ice into a glass or other container placed underneath it. With use, because of misuse, or as a result of accidental damage, part or all of the ice chute door and funnel may malfunction or fail entirely. When this happens, a replacement part is required to continue using the ice dispensing feature.If the ice chute no longer dispenses ice, or if it is dispensing too much or too little ice, it's a good indication that there is something wrong with this part of the appliance. It's a quick repair. It is always recommended to unplug the device before beginning the replacement. Move any food that could spoil while the repair is being completed.This refrigerator ice dispenser ice chute door and funnel assembly is a genuine OEM replacement part. It is sourced directly from the manufacturer. It is sold as an individual unit and made of durable materials. The replacement part is compatible with several models of refrigerators manufactured by General Electric, Hotpoint, and RCA.

The Dispenser Touchpad is an OEM part for GE refrigerators. This touchpad allows users to control the dispensing of water and ice from the refrigerator by selecting options and settings on the interface.

Causes of a bad touchpad can include electrical failures, wear and tear from regular use, or damage from moisture and spills. 

Symptoms of a bad dispenser touchpad include:

• Unresponsive or intermittent touch controls
• Incorrect or erratic dispensing of water or ice
• Display issues or malfunctioning lights
• Difficulty selecting or changing settings

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This dispenser interface assembly is the electronic control module behind the refrigerator's ice/water dispenser panel. It reads your button selections and manages the display and lights, restoring reliable dispenser control when the original interface malfunctions. What it does:

• Interprets dispenser keypad inputs (water, cubed/crushed ice, light, lock)
• Sends commands to the refrigerator to dispense ice or water as selected
• Controls the dispenser display and indicator lights
• Failure may present as unresponsive buttons, intermittent operation, or a blank/flickering dispenser display

• 1 dispenser interface assembly

• Disconnect power to the refrigerator before servicing
• Carefully remove the dispenser trim/escutcheon, release locking tabs, and support wiring
• Note and unplug wire harness connectors; handle electronics with ESD precautions
• If your model uses a separate decorative overlay, transfer it from the original assembly before reassembly

This dispenser interface assembly restores the electronic user interface for your refrigerator's ice and water dispenser. It reads button selections and sends commands to the dispenser system, helping resolve a dead display or unresponsive dispenser controls.

• Manages ice/water selection, dispenser lighting, and lock functions
• Interprets button presses and signals the auger motor, water valve, and related control circuits
• Failure can present as no response from buttons, no backlight/display, inability to switch cubed/crushed ice, or intermittent operation
• Replacing a failed interface can restore normal dispenser control

• Disconnect power to the refrigerator before servicing
• Remove dispenser trim carefully and access mounting screws to reach the interface
• Transfer wire harness connectors one at a time, matching orientation to avoid miswiring
• Handle the electronics with care; avoid static discharge and verify door switch/lever alignment before reassembly

Glass touch dispenser assembly replaces the front touch surface and dispenser controls on refrigerators with a glass-style dispenser, restoring responsive touch operation and a clean, finished look for water and ice dispensing. What it does:

• Replaces the glass touch panel and integrated dispenser control so touch commands register correctly.
• Restores proper water and/or ice dispensing when the original touchpad is cracked, scratched, or unresponsive.
• Covers the dispenser opening and improves the refrigerator's appearance by replacing a damaged or discolored front panel.
• Works with the existing dispenser hardware and wiring when the original assembly is removed intact.

• Always disconnect power to the appliance (and shut off the water supply if working on the water/ice dispenser) before starting.
• Handle the glass panel carefully to avoid breakage and personal injury; wear gloves and eye protection when needed.
• Installation typically requires removing the dispenser bezel/door access panel and unplugging the harness from the old assembly—retain existing screws and clips unless replacements are provided.

This dispenser cover assembly replaces a cracked or damaged dispenser housing cover to restore a clean appearance and help the dispenser direct ice and water properly. Molded plastic protects internal components and maintains dispenser alignment. What it does:

• Covers and protects the dispenser opening and internal components from dirt, moisture, and impact.
• Helps guide ice and water to reduce jams, misfeeds, and drips at the dispenser opening.
• Restores appearance when the original cover is cracked, split, or cosmetically damaged.
• Seats into the dispenser housing using factory clips and mounts to maintain proper alignment.

• Disconnect power and shut off the water supply before servicing to prevent shock and leaks.
• Remove dispenser trim or inner door panel to access the cover; support the door/trim while working.
• Handle plastic clips and tabs carefully—damaged clips may require replacement.
• After installation, restore power/water and test the dispenser for proper function and leaks.

This dispenser interface assembly is the user control module for the refrigerator's ice/water dispenser. It processes button presses and manages dispenser functions, helping resolve issues when the front dispenser controls or display stop responding.

• Interprets dispenser button inputs (water, cubed/crushed) and sends commands to the control system
• Manages front-panel indicators/display and dispenser light/lock functions, as designed by the model
• Symptoms of failure: dispenser won't respond to button presses or won't dispense water/ice
• Other signs: no lights/display, cannot change ice type, intermittent or erratic operation

• Unplug the refrigerator or disconnect power before servicing
• Remove dispenser trim and control panel to access the interface; retain screws and clips
• Handle ribbon cables/connectors by the plugs; take photos for reference to ensure correct reconnection
• This is a static-sensitive board—ground yourself or use an ESD strap; test dispenser functions before reinstalling trim

This dispenser cover assembly restores a clean, secure front to the refrigerator's ice/water dispenser area. It protects internal components and provides the finished bezel for the user interface on the freezer door.

• Covers and protects the dispenser compartment and wiring
• Provides the front bezel for dispenser selections and indicators
• Helps keep internal components aligned and securely mounted
• Common symptoms: cracked or missing bezel, broken tabs, loose/rattling panel, worn appearance

• Disconnect power before servicing
• Remove the drip tray and any retaining screws/clips; carefully release the old cover
• Transfer existing controls/electronics and hardware to the new cover
• Reinstall cover and fasteners; restore power and test dispenser functions

The Dispenser Assembly is an OEM replacement part for GE refrigerators. This actuator is responsible for controlling the functions of the refrigerator's dispenser, allowing you to dispense water or ice.

A bad dispenser actuator assembly can occur due to wear and tear, damage, or component failure over time. If you notice symptoms such as the dispenser not responding to your input, loose or wobbly movement of the actuator, or the dispenser not dispensing water or ice properly, it may indicate a need to replace the actuator assembly.

Symptoms of a bad dispenser actuator assembly include:

• Unresponsive dispenser
• Loose or wobbly actuator movement
• Improper dispensing of water or ice

Restore your refrigerator's dispenser by replacing the faulty dispenser actuator assembly with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This HMI assembly is the user-interface control panel that lets you operate the appliance's front controls and display. Replaces a damaged or unresponsive control surface to restore button and display functionality. What it does:

• Provides the push-button controls and display interface for operating the appliance.
• Sends user commands to the main control board for functions like cycle selection, options, and start/stop.
• Commonly replaces units that are cracked, have unresponsive buttons, or show display errors.
• Helps resolve intermittent or failed front-panel communication when the HMI is the diagnosed fault.

• High-level replacement only; refer to factory service literature for step-by-step procedures.
• Disconnect power to the appliance before servicing to avoid shock or damage.
• Handle the assembly carefully to avoid damaging connectors, ribbon cables, or the display lens.

The Collar Kit is an OEM component for GE side-by-side refrigerators with an external ice dispenser. It surrounds the door dispensing area and creates a seamless aesthetic transition point. Effective dispensing relies on this collar kit.

Causes of failure can involve cracked or weakened mounting clips that no longer hold the collar securely, dried-out sealing materials failing to block air/temperature loss, or broken plastic pieces altering proper alignment.   

Symptoms of a bad collar kit include:

- Dispensed ice having melted or softened exterior surfaces  
- Excessive warm air leakage noticeable near the dispensing area doorway
- Potential for liquid spills due to improper sealing

Note: Color Black

Replacing with this genuine GE collar kit ensures optimized sealing around the ice dispensing portal for dependable storage. Compatible replacements include Hotpoint, RCA, and Kenmore branded dispenser fridge models seeking to restore integrity and functionality.
 

This HMI assembly is the user interface/control panel that operates the dispenser and display functions on compatible refrigerators. Replaces a worn or non-working control/display assembly to restore input and visual feedback. What it does:

• Provides the front-facing display and touch/press controls for dispenser and temperature settings
• Sends user commands to the refrigerator's main control board for functions like dispensing and settings changes
• Commonly replaces assemblies when the display is blank, unresponsive buttons, or incorrect/disappearing indicators
• Restores normal control and feedback when original panel is cracked, worn, or electrically failed

• One HMI assembly (control panel/display)

• Disconnect power before starting to avoid shock or damage
• Handle ribbon cables and connectors gently; ensure connectors are fully seated during reassembly