Refrigerator Drawer, Shelf, Pan

The Shelf Frame is an OEM part for Whirlpool refrigerators. It supports the refrigerator shelves, providing a sturdy and stable base for food storage. This frame ensures that the glass or wire shelves remain securely in place and can handle the weight of stored items. The frame measures about 28 by 15.5 inches.

Causes of a bad shelf frame can include heavy loading, physical impacts, or material fatigue over time.

Symptoms of a bad Shelf Frame include:

• Shelves not sitting level or securely
• Cracks or breaks in the frame
• Difficulty installing or removing shelves
• Items falling or tipping over due to instability

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Glass Shelf is an OEM part for LG refrigerators. It provides a durable surface for organizing and displaying items inside the refrigerator and freezer compartments.

Causes of a faulty shelf can include chips or cracks developing from repeated loading and unloading of items over time. Temperature fluctuations may also cause warping.

Symptoms of a problematic glass shelf include:

• Sagging or bowing that prevents proper fitting
• Breaks or weak spots that compromise strength
• Difficulty removing or replacing the shelf

This OEM LG part is also compatible with some Kenmore models.

This 26.7" shelf assembly replaces a damaged or missing refrigerator shelf so you can organize food safely and restore usable storage space. Built to sit on existing shelf supports and hold everyday refrigerator items. What it does:

• Provides a stable, flat surface for storing food and containers
• Replaces cracked, chipped, sagging or broken shelving
• Helps prevent spills and keeps items organized for easier access
• Matches the OEM shelf footprint and mounting points for a direct fit

• One shelf assembly (26.7")

• Remove all items from the shelf and support area before installing
• Slide or set the shelf into the existing support rails or brackets per your model's layout
• If clips or rails are damaged, replace them before installing this shelf
• Dispose of broken glass safely and wear gloves to avoid injury

The Door Shelf Retainer Bar is an OEM replacement part for Whirlpool French door refrigerators. Positioned inside the door panels, this plastic retainer bar securely holds shelves in place allowing for flexible storage options. 

Causes of a bad retainer bar include normal wear and tear over extended use, excessive weight loads weakening the plastic material, or damage from impact.

Symptoms of a bad retainer bar include:

• Shelves that no longer stay firmly in position and slide around inside the door  
• Gaps between shelves causing an unorganized or crammed interior space
• Annoying rattling or clicking noises coming from the door storage area

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is the crisper drawer pan for the refrigerator compartment. It provides a dedicated space to store produce at optimal humidity, helping keep fruits and vegetables organized and fresh.

• Holds produce in the crisper area and slides in/out on existing rails
• A damaged, cracked, or missing pan can cause poor produce storage, sticking drawer movement, or items falling through
• Restores proper fit and function of the crisper section

• Unplug the refrigerator before service
• Open the refrigerator door fully; remove contents and the old drawer
• Inspect and clean the shelf rails before sliding the new pan into place
• Do not force; align with tracks to avoid damage

The Drawer Slide Rail is an OEM part for LG refrigerators. This component supports the refrigerator drawers, allowing them to slide in and out smoothly for easy access to stored items.

You should replace the drawer slide rail if it becomes damaged or worn out. Causes of a bad drawer slide rail can include regular wear and tear from frequent use, exposure to heavy loads that strain the rail, or physical damage due to mishandling. A faulty slide rail can lead to difficulty in opening or closing the drawers and may cause the drawers to become misaligned or fall out.

Symptoms of a bad Drawer Slide Rail include:

• Difficulty sliding the drawer in and out
• The drawer not aligning properly with the tracks
• The drawer feeling loose or unstable
• Unusual noises when opening or closing the drawer

This OEM LG part is also compatible with Sears/Kenmore models.

The Snack Pan is an OEM replacement part for Whirlpool refrigerators. It provides convenient, adjustable storage for snacks and small produce.

Causes of issues can include wear from constant removal/insertion and weakening connections over time.

Symptoms of a faulty pan snack include:

• Items falling through weakened divisions
• Rocking or loose fit on shelves
• Cracks that allow spills in the refrigerator

This Whirlpool replacement ensures sturdy, versatile organization. Compatible with additional brands like Maytag, Jenn-Air, and Roper, it facilitates storage tailored to any refrigerator setup. 

The Freezer Basket Hanger is an OEM part for Frigidaire refrigerators. This component supports the freezer basket, ensuring it stays securely in place and slides in and out smoothly. The hanger is crucial for organizing and maximizing the storage space in the freezer compartment.

Causes of a bad hanger can include repeated use leading to wear and tear, exposure to heavy loads, or accidental breakage. A faulty hanger can lead to instability and difficulty accessing the freezer basket.

Symptoms of a bad freezer basket hanger include:

• Freezer basket not staying in place
• Difficulty sliding the basket in and out
• Freezer basket sagging or tilting
• Visible damage or cracks in the hanger

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Dairy Bin is an OEM replacement part for Whirlpool's built-in and integrated refrigerator side-by-side door shelves. It provides a designated space optimized for storing dairy products.

Over time, dairy bins can become worn out or damaged due to regular use. Causes of a bad dairy bin include cracking or breaking from accidental drops, warping from heavy loads, or damage from frequent opening and closing of the refrigerator door.

Symptoms of a faulty dairy bin include:

• Cracks or stress fractures in the plastic that compromise the seal   
• Missing or broken divider pieces within the bin's grid design
• A door that no longer stays securely attached due to failure of mounting tabs

This OEM Whirlpool part is also compatible with built-in models produced by KitchenAid, Jenn-Air, and some Kenmore side-by-side refrigerators.

The Bin-Cntlvr (Cantilever Bin) is an OEM part for Whirlpool refrigerators. This bin attaches to the refrigerator door and provides additional storage space for items like bottles, condiments, and other small containers. The cantilever design allows for easy adjustment and customization of shelf space within the refrigerator door.

Causes of a bad cantilever bin can include overloading the bin with heavy items, accidental impacts, or wear and tear from regular use.

Symptoms of a bad cantilever bin include:

• The bin not staying in place on the door
• Cracks or visible damage to the bin
• Difficulty adjusting or removing the bin
• Items falling out of the bin due to instability

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is a freezer door bin that holds packaged foods and keeps items organized on the freezer door. It restores secure storage when a bin is cracked, loose, or missing, helping you maximize freezer space.

• Provides a dedicated shelf on the freezer door for smaller or flat items
• Replaces bins that are broken, warped, or falling off the door
• Helps prevent items from slipping into the compartment or blocking drawers
• Maintains proper organization and easy access to frequently used foods

• Unplug the appliance before replacement
• Empty the old bin and lift it off the door mounts
• Align the new bin with the door tabs or rails and press firmly until it locks
• Check for secure fit before loading items

The Door Bin is an OEM part for Whirlpool refrigerators, designed to provide convenient and accessible storage for a variety of items within the refrigerator door. Made from durable plastic, it is designed to withstand the typical wear and tear of daily refrigerator use, providing a stable and easy-to-clean space for storing condiments, beverages, and other frequently accessed items.

The reason for replacing a Door Bin usually involves physical damage from accidents or overloading, as well as the natural aging process of plastic, which can lead to brittleness and cracking. 
 
Symptoms for a replacement Door Bin include:

• Cracks or breaks in the bin that prevent it from holding items securely
• Warping or damage that affects the bin's ability to fit properly in the door
• Discoloration or aesthetic damage that detracts from the refrigerator's overall appearance

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Door Bin is an OEM part for Whirlpool refrigerators. This bin provides a convenient place to store condiments, jars, bottles, and other small to medium-sized items, making them easily accessible and maximizing the overall storage efficiency of your refrigerator. The bin measures about 18 inches wide by 4-1/2 inches high by 8 inches deep.

Causes of a bad Door Bin can include cracking or breaking due to overloading, damage from impact if items are placed too forcefully, or wear and tear over time, leading to a decrease in the aesthetic appeal and functionality of the refrigerator's interior.

Symptoms of a bad Door Bin include:

• Difficulty fitting into its designated slot
• Cracks or breakage that compromise its ability to hold items securely
• Noticeable warping or discoloration affecting the overall look of your refrigerator interior

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Door Shelf Bar is an OEM part for GE refrigerators. This bar is located on the interior side of the refrigerator door. It provides support for items such as condiments, jars, or bottles. It helps to organize the refrigerator and prevent items from tipping or falling during the opening and closing of the door. The Door Shelf Bar is designed to withstand the weight of items placed on it and ensures they are held securely in place.

Causes of a bad Door Shelf Bar can include wear and tear, accidental damage, or improper weight distribution.

Symptoms of a bad Door Shelf Bar may include:

• Cracks or breakage in the bar.
• Difficulty in securely holding items.
• Limited storage capacity due to a damaged or missing bar.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Clip is an OEM replacement part for Frigidaire refrigerators. It works to securely hold various refrigerator components such as shelves or baskets in place. The clip applies tension to prevent shelves from shifting or drawers from opening unintentionally during regular usage and cleaning. 

Causes of a bad clip can include cracks or breaks from over-tightening or repetitive fastening and unfastening over time. The clip’s plastic material can also become brittle or misshapen with age.

Symptoms of a bad clip include: 

• Shelves or baskets that no longer stay firmly in place and slide around easily inside the refrigerator 
• Gaps appearing around refrigerator shelves where the clip has failed to hold tightly
• Difficulty accessing certain refrigerator areas if shelves or other components now slide freely

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Note: The pan does not come with the Axle WPW10257246 and Roller WPW10248544. Order quantity needed.