Refrigerator Drawer, Shelf, Pan

The Bin Assembly is an OEM part compatible with Frigidaire refrigerators. It serves as the centralized storage compartment for items like eggs and deli meats in the refrigerator door. This bin has approximate dimensions of  15" wide, 6" deep, and 4" tall. 

Causes of a bad bin assembly include cracks or breaks over multiple years of use, damages due to excessive weight loads, or impacts from unintentional drops or jostling within the refrigerator door. 

Symptoms of a bad bin assembly can include: 

• Leaks from cracks in the plastic walls or around seals
• The bin door fails to latch or stay closed securely  
• Loss of insulation integrity reducing refrigeration efficiency
• Visible deformations, dents, or cracks in the plastic structure

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and select Kenmore models.

The Crisper Drawer Front is an OEM part for Whirlpool refrigerators. This maintains the appearance and functionality of the refrigerator's crisper drawer, where fruits and vegetables are stored. It attaches to the crisper drawer to enclose and preserve the freshness of its contents by maintaining optimal humidity levels. 

Common causes of damage include regular wear and tear from frequent use, accidental impact, or pressure from overloading the drawer. A compromised drawer front can hinder the drawer’s functionality and aesthetic

Symptoms of a bad Crisper Drawer Front include:

• Cracks or breaks that compromise the seal of the drawer
• Discoloration or fogging that reduces visibility
• Difficulty in sliding the drawer in and out due to misalignment

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Glass Crisper Cover is an OEM part for Whirlpool refrigerators. It serves as the cover for the crisper drawers, providing a sturdy surface for storing items while helping to maintain the humidity levels inside the drawers to keep fruits and vegetables fresh. Measuring approximately 15 1/4" by 18", it ensures the drawer slides in and out smoothly.

Causes of a bad glass crisper cover can include accidental impacts that cause cracks or shattering, stress from heavy loads placed on top of the cover, or general wear and tear over time. Exposure to extreme temperatures or mishandling during cleaning can also lead to damage.

Symptoms of a bad glass crisper cover include:

• Cracks or breaks in the frame
• The cover not fitting securely over the crisper drawers
• Difficulty sliding the crisper drawers in and out
• Food items falling through due to gaps or damage

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Glass Pan Cover is an OEM part for GE refrigerators. It serves as a cover for the crisper drawers, providing a flat surface for additional storage while keeping the contents of the drawers fresh. This glass cover helps maintain optimal humidity levels within the crisper, ensuring that fruits and vegetables stay fresh longer.

Causes of a bad glass pan cover can include cracks or chips from accidental drops, regular wear and tear, or excessive weight being placed on it. Damage to the cover can compromise its effectiveness and safety.

Symptoms of a bad glass pan cover include:

• Visible cracks or chips in the glass
• The cover not fitting properly or becoming unstable
• Difficulty in maintaining the crisper's humidity levels
• Risk of shattered glass within the refrigerator

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Pan Snack Lower is an OEM part for GE refrigerators. This component is designed to store snacks and other small items in the lower section of the refrigerator, offering a convenient and organized storage solution. The pan slides in and out smoothly, making it easy to access your snacks and keep them fresh.

Causes of a bad pan snack lower can include physical damage from overloading or mishandling, cracks or breaks from wear and tear over time, or issues with the sliding mechanism that prevent it from operating correctly. A damaged or malfunctioning pan can reduce storage efficiency and accessibility.

Symptoms of a bad pan snack lower include:

• Difficulty sliding the pan in and out
• Cracks or breaks in the pan material
• The pan not staying in place or falling out
• Reduced storage efficiency within the refrigerator

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Bin is an OEM part for GE refrigerators. This door bin is designed to fit onto the inner door panel of the refrigerator, providing convenient storage for condiments, bottles, and other items that need to be easily accessible. The use of this bin helps to maximize the storage capacity of the refrigerator, keeping items organized and within reach. 

Causes of damage to the door bin often include overloading it with too much weight, which can lead to stress cracks or breakage. 

Symptoms of a bad Door Bin include:

• Cracks or breaks in the bin 
• The bin not fitting properly onto the door panel 
• Difficulty in sliding the bin in and out or removing it for cleaning 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Bin is an OEM part for Frigidaire refrigerators. It is a storage compartment designed to fit securely onto the interior of the refrigerator door, providing convenient and easily accessible storage space for items like beverages, condiments, or other small food items.

Causes of a bad door bin can include cracks or damage due to impact or mishandling, warping or discoloration from exposure to heat or moisture, or wear and tear on the hinges or mounting mechanisms that attach the bin to the door.

Symptoms of a faulty door bin may include:

• Cracks, chips, or other visible damage
• The bin not fitting properly or securely onto the door
• Leaks or spills due to a poorly sealed or damaged bin
• Difficulty opening or closing the bin
• Obstructed access to the bin due to misalignment or warping

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

This is the 2 liter bin. For the gallon door bin use part number 240383801.

The Door Bin is an OEM part for Frigidaire refrigerators. This bin attaches to the inside of the refrigerator door, providing convenient storage for smaller items like condiments, beverages, and jars.

Common causes of a bad door bin include regular wear and tear from frequent use, cracking or breaking due to overloading, or impact damage from items being placed in or removed from the bin.

Symptoms of a bad door bin include:

• Cracks or breakage in the plastic
• The bin not staying securely in place
• Difficulty in holding items due to instability
• Discoloration or warping of the bin material

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Freezer Door Shelf is an OEM part for Frigidaire side-by-side refrigerators. It provides adjustable storage within the freezer compartment for easy access to items. The shelf measures about 24 inches long and 5 inches wide.

Causes of a bad freezer door shelf can include wear over time from repeated loading/unloading that causes scratches or cracks in the lightweight plastic. Exposure to slushy spills may promote material breakdown if not cleaned promptly. 

Symptoms of a bad freezer door shelf include:

• Sagging or inability to bear weight of frozen packages
• Breakage leaving smaller pieces that could fall  
• Discoloration compromising appearance and sanitation
• Shelving that won't stay level or properly positioned

This genuine Frigidaire shelf is also compatible with Electrolux and Kenmore models.

The End Cap is an OEM part for GE refrigerators. It is designed to fit on the ends of refrigerator shelf supports, providing a finished look and helping to secure the shelf in place. This small but important component prevents the edges of the shelves from becoming damaged or causing injury by covering sharp ends and supporting the overall structure of the shelving system.

Symptoms of a bad End Cap include:

• Shelves becoming loose or falling down,
• Visible cracks or breaks in the end cap,
• Difficulty in securing the shelf properly.

Causes of end cap failure typically include physical stress from overloading shelves, accidental impacts during loading or unloading items, or material degradation over time due to the environmental conditions within the fridge.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lower Crisper Drawer is an OEM part for GE refrigerators. It is designed to provide a dedicated space for fruits and vegetables. This drawer helps in maintaining the right humidity levels to extend the freshness and life of your produce. With its clear design, it allows for easy visibility of its contents, enabling quick access without the need to open the drawer fully.

A malfunctioning or damaged crisper drawer can result from several factors, including overloading the drawer beyond its capacity, which can lead to cracks or breaks, or regular wear and tear over time. Additionally, mishandling during cleaning or storage adjustments can also cause damage.

Symptoms of a bad Lower Crisper Drawer include:

• Difficulty in sliding the drawer in or out
• Cracks or damage that can lead to improper sealing or difficulty in maintaining humidity levels
• Visible warping that affects the drawer's fit within the refrigerator

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Crisper Bin Cover is an OEM part for Frigidaire refrigerators. It serves as the cover for the crisper bin, providing a flat surface for additional storage while helping to maintain the optimal humidity levels within the bin. This crisper cover measures approximately 26 x 19 inches.

Causes of a bad crisper bin cover can include regular wear and tear, heavy items causing cracks or breakage, or accidental damage from mishandling during cleaning or reorganization. Over time, these factors can compromise the functionality and appearance of the cover.

Symptoms of a bad crisper bin cover include:

• Cracks or visible damage on the cover
• The cover not fitting properly or securely over the crisper bin
• Difficulty in opening or closing the crisper drawer due to an ill-fitting cover

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Rack is an OEM part for Frigidaire refrigerators. This rack provides additional storage space for bottles, jars, and other condiments. It's an essential component for maximizing the storage capacity and organization of your refrigerator, making the most out of the available space. 

Over time, door racks can experience wear or become damaged due to overloading, accidental impacts, or the natural aging process. This can lead to issues such as the rack becoming loose, cracking, or not being able to securely hold items.

Symptoms of a bad Door Rack include:

• Cracks or breaks in the rack, compromising its structural integrity
• The rack sagging or not attaching securely to the refrigerator door
• Difficulty in sliding the rack in or out, or it not fitting properly
• Reduced effectiveness in holding items securely

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Door Rack Support is an OEM part for Frigidaire refrigerators. It is designed to support the door rack or bin, providing a secure mounting point that helps hold items in place within the refrigerator door. This support piece ensures that the door racks remain stable, allowing you to store and organize items like bottles, jars, and condiments efficiently.

Causes of a bad door rack support can include regular wear and tear from frequent use, overloading the door racks with heavy items, or accidental damage from impacts or mishandling. Over time, these factors can cause the support to crack, break, or lose its ability to hold the door rack securely.

Symptoms of a bad door rack support include:

• Door racks sagging or falling out of place
• Difficulty in fitting or securing the door racks
• Visible cracks, breaks, or damage to the support

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Bin is an OEM replacement part for Frigidaire refrigerators. The door bin is responsible for organizing smaller items and optimizing interior space utilization. It measures approximately 5" depth x 12 1/2" width x 3" height.

Causes of a bad door bin can include damage such as cracks or breaks in the plastic, broken adjustable shelves, or issues with the mounting brackets that secure it inside the refrigerator door. 

Symptoms of a bad door bin include:

• Items falling out of the bin due to structural integrity issues
• Difficulty accessing storage areas due to broken shelving  
• The bin not sitting securely inside the door

This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Snack Pan Rail is an OEM part for GE refrigerators. It provides support and a sliding track for the snack pan or deli drawer, allowing it to move smoothly in and out for easy access to stored items. It measures approximately 14 inches in length and 2 inches in width.

You should replace the snack pan rail if it becomes worn out or damaged. Causes of a bad snack pan rail can include repeated use, excessive weight in the snack pan causing strain, or damage from accidental impacts during loading or cleaning.

Symptoms of a bad snack pan rail include:

• The snack pan or deli drawer not sliding smoothly
• The drawer becoming stuck or difficult to open and close
• Visible cracks or breaks in the rail
• The rail detaching from its mounting points

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.