Need Help?
Call
This is a refrigerator ice and water dispenser drip tray located on the freezer door. Color: White. It measures about 8 inches wide by 4 inches deep. For black order WR17X11655.
Ordered the new interface display - this must be the easiest refrigerator repair possible. My version popped right off without even a screw (some models have a screw). There are 3 different sizes of connector to disconnect and hook up to the new board - so you really can't mess that up. Read more
Collects defrost water from the evaporator and directs it to the drain. Replace if cracked, broken, or leaking to prevent water pooling under your fridge.
I took all the food out of the fridge, and tilted the refrigerator 30degrees to the left (if looking straight at the fridge). I unscrewed the cardboard backing, and moved the drip tube from the drain pan. I unscrewed the 4 screws for the drain pan, and the 2 hex screws holding up the metal plate on the left side (becuase there is a lip on the metal plate that holds the pan in). Then I could slightly pull down on the metal plate and pull the drain pan out. Then popped the new drain pan in. Read more
Drip tray collects defrost and condensation water beneath your refrigerator. Replaces cracked, broken, or missing trays to prevent leaks and floor damage.
Collects defrost water beneath your refrigerator. Replace if cracked, warped, or leaking to prevent floor damage and protect surrounding cabinetry.
Bought new drain pan and installed. Read more
Interior drip pan grille that catches water below the dispenser. Replace if cracked, broken, or missing to restore proper coverage and appearance.
Size: 29 1/4 inches x 31 1/4 inches. This universal washer drip tray is large enough for duet washers and sits under the washer to protect your floors from scuffs, spill, etc. Includes a PVC drain fitting.
Plastic drip tray installs beneath the ice and water dispenser to catch drips and splashes. Replace if cracked, stained, or missing from your fridge.
Very easy fix. Chome grate/grille pops out by hand. Drip tray was two Philips screws. I wiped down the area with cleaning vinegar to remove some hard water stains, rinsed it down then put everything back. There is in an in-between tray that you could also replace but mine wasn't too bad, so I only did the grille and the bottom tray. Read more
Replacement drip pan that collects defrost water and condensation beneath your refrigerator. Needed when original pan is cracked, broken, or missing.
Replaced the drain pan. Read more
Black removable grate for your refrigerator's ice/water dispenser well. Catches drips and keeps the area tidy. Replace if cracked, broken, or missing.
This is a plastic drip tray that sits beneath the water or ice dispenser on the front of your refrigerator to catch spills and drips. It snaps into place and can be removed for easy cleaning. Replace this tray if it is cracked, warped, discolored, or no longer fits securely in its mounting position.
This is the front-facing grille panel that mounts at the bottom of the refrigerator, covering the condenser area and drip tray. It allows airflow to the condenser while catching condensation and defrost water. Replace this part if the grille is cracked, broken, discolored, or if the drip tray portion is damaged and leaking water onto the floor.
Website was easy to navigate with the serial number sufficient to find the proper diagram and get the part number. Order was painless and arrived very quickly. Packaging was good and parts arrived undamaged. Other than the cost of the part I was pleasantly surprised at the experience. Read more
Dispenser tray for Samsung refrigerators. Installs below the ice and water dispenser to catch drips and spills. Replace if cracked, broken, or missing.
Replaced the part. Read more
White drip tray installs under your refrigerator to catch leaks and overflow. Replace if cracked, broken, or missing to protect floors and cabinets.
Found your easy to use website and ordered the drip tray. Read more
Channels defrost water from the evaporator to the drain pan. Replace if cracked, broken, or leaking to prevent water pooling in the fresh-food compartment.
Replaces a cracked or broken drain trap in your refrigerator. Installs on the drain hose at the back of the unit. Use pliers to remove the old trap.
The Dispenser Drip Tray is an OEM part for Frigidaire refrigerators. It is located under the water and ice dispenser to catch any drips or spills that occur during use.
A bad dispenser drip tray can be caused by wear and tear, damage, or improper cleaning. When the drip tray becomes faulty, it can result in issues such as water or liquid pooling on the dispenser area or leaking onto the floor.
Symptoms of a bad dispenser drip tray include:
Replace your faulty dispenser drip tray with this genuine OEM Frigidaire part to restore your dispenser area. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.