Refrigerator Drip Pan

The Refrigerator Drain Suction Assembly is essential for maintaining proper drainage in your Samsung refrigerator. This genuine OEM part ensures efficient water removal, preventing clogs and potential leaks. Crafted with high-quality materials, it offers durability and reliable performance. Compatible with a wide range of Samsung refrigerator models, this assembly guarantees a precise fit and easy installation. By replacing a damaged or malfunctioning drain suction assembly with this genuine OEM part, you can restore your refrigerator's functionality and prolong its lifespan. Its seamless integration helps maintain optimal cooling and prevents unwanted moisture build-up inside your appliance. Investing in the Refrigerator Drain Suction Assembly ensures your Samsung refrigerator runs smoothly and efficiently, providing a better cooling experience and reducing the need for frequent repairs.

Replacement drip tray for refrigerators. Installs under evaporator coils to catch condensation and defrost water. Replace if cracked, warped, or missing.

This condensate drain pan sits at the base of the refrigerator to collect defrost water and allow it to evaporate over the warm compressor, helping prevent floor puddles, moisture damage, and musty odors around the unit.

• Collects and holds defrost condensate from the drain tube (also called a drain pan or drip tray)
• Stages water to evaporate safely using compressor/condenser heat
• Replace if the pan is cracked, warped, missing, or leaking
• Common symptoms: water under/behind the refrigerator, damp flooring, or persistent musty odors near the bottom rear

• Unplug the refrigerator and pull it away from the wall; shut off water supply if connected
• Remove the rear lower access panel to reach the pan near the compressor
• Lift out the old pan; clear any debris from the drain outlet; transfer original mounting hardware if needed
• Seat the new pan level under the drain tube; ensure it's secure and reinstall the access panel

Replace your refrigerator's dispenser drip tray if it's cracked, peeling, discolored, corroded, or worn. Slides into place beneath the water/ice dispenser.

Color: Chrome. It measures about 7-1/2 inches wide by 4 inches deep. For Black, order WR17X12324.

Catches drips beneath your refrigerator's ice and water dispenser. Replace if cracked, stained, worn, or missing to restore a clean, finished look.

This drain tray catches and channels condensed or drained water away from the appliance base to help prevent leaks and water damage. It replaces a cracked or warped tray so drains flow where they should. What it does:

• Collects condensate or defrost water and routes it toward the appliance drain
• Prevents water pooling under the unit that can cause floor or cabinet damage
• Helps reduce odor and mold risk by keeping water from collecting in the cabinet
• Visible signs a tray may need replacement: cracks, warping, or active leaking beneath the appliance

• Disconnect power and water before servicing the appliance
• Remove any panels or shelves to access the tray; handle sharp sheet-metal edges with care
• Ensure the tray seats correctly and that any drain hose or channel is properly connected and unobstructed
• Follow OEM service instructions for reassembly and test for leaks before returning the appliance to normal use

Plastic tray that installs below the ice and water dispenser to catch spills and drips. Replace if cracked, broken, or missing to prevent leaks.

This is a refrigerator drip pan kit. It is located on the bottom of the appliance and is used to help catch condensation from the appliance. Any moisture that is made while the refrigerator goes through its operation cycles will collect in the pan to prevent a mess. If the drip pan has been damaged, the most common symptom is water dripping on the floor. Checking for a clog should be done. If the actual part is damaged, it will need to be replaced.Before replacing the drip pan kit, unplug the power cord on the appliance and pull the refrigerator from the wall. Use a nut driver to release the water inlet line coupler before taking off the access panel. Reach in and bend the pan retaining tab, open the doors of the appliance, and take off the water filter cover. Remove the toe plate to access and replace the drip pan.This is a genuine OEM drip pan kit that can be used as a replacement for Dacor, Jenn Air, Hardwick, and Maytag refrigerators. It is sold as an individual component and is provided directly from the manufacturer.

This replacement lid restores the appliance's finished top cover, protecting internal components and helping the door/hatch close properly. Use when the original lid is cracked, warped, or missing to keep the unit looking and operating as intended. What it does:

• Covers and protects the appliance's top/opening area from debris and damage.
• Secures to existing hinge or mounting points to ensure proper closure.
• Replace if you see visible cracks, chips, warping, or if the lid no longer latches or aligns.
• Helps prevent rattling or rubbing caused by a damaged or loose lid.

• Disconnect power (and water, if applicable) before starting any repair.
• Handle edges carefully; some lids include glass or thin sheet material that can chip.
• Basic hand tools (screwdriver/torx) may be required; keep mounting hardware if reusing.

Catches water and spills beneath your refrigerator's ice and water dispenser. Replace if cracked, stained, or missing to protect the door from moisture.

Catches drips and spills beneath your refrigerator's ice/water dispenser. Replace if cracked, broken, or missing to protect your door and floor.

Collects and channels defrost water from the evaporator to the drain system. Replace if cracked, rotted, or leaking to prevent water pooling inside.

Drip tray collects defrost and condensation water inside your refrigerator. Replace if cracked, warped, or missing to prevent pooling and odors.

Color: silver. Measures about 9-1/2 inches wide by 5 inches deep.

Evaporator drip pan collects defrost and condensate water beneath your refrigerator. Replace if cracked, broken, or missing to prevent leaks.