Refrigerator Grille

This lower front grille/kickplate replaces a damaged or missing kickplate to restore your appliance's appearance and protect the lower front panel. Durable black finish matches factory styling for a clean, finished look. What it does:

• Covers and protects the appliance's lower front opening and underlying components
• Restores cosmetic appearance if the original is dented, cracked, scratched, or missing
• Helps keep pets and objects from contacting components behind the panel
• Provides the factory look and fit for a seamless exterior

• Disconnect power to the appliance before beginning any service
• Typically fastens with retaining tabs and/or screws; align tabs and snap or secure as needed
• Use basic hand tools and protect surrounding surfaces during removal/installation
• Inspect and replace clips for a secure fit

This 32" grille/kickplate covers the lower front of your range or oven, restoring appearance and protecting internal components from dust and debris. It gives a finished look and helps keep airflow areas clear. What it does:

• Covers and protects the appliance base from spills, dust, and debris
• Restores the finished appearance of a damaged or missing lower front panel
• Helps maintain unrestricted airflow to lower vents and components
• Common symptom: visible gap or damaged lower panel after impacts or wear

• One grille/kickplate (32")

• High-level install: typically fastened with screws along the bottom front; check existing mounting points before installing
• Use appropriate-size screwdriver and avoid overtightening to prevent panel bending
• Disconnect power to the appliance before working on areas near electrical or heating components

A replacement front grille that restores the finished appearance at the bottom front of your appliance and helps protect internal components and air openings. Designed to match the original fit and finish for easy replacement. What it does:

• Covers and protects lower front openings and components from debris and impacts
• Helps direct airflow at the appliance base for proper ventilation
• Restores cosmetics if the original grille is cracked, broken, or missing
• Keeps loose or detached trim secured to the appliance front

• High-level task: remove access screws or clips and snap or screw the replacement grille into place
• Safety first: unplug the appliance or turn off power at the breaker before servicing
• Handle edges carefully to avoid cuts and install using the original fasteners when possible
• If mounting hardware is missing or damaged, obtain the correct screws/clips for a secure fit

The Refrigerator Front Leg Cover Assembly is designed to protect and enhance the front legs of your Samsung refrigerator. This genuine OEM part ensures a perfect fit, maintaining the stability and appearance of your appliance. Crafted from durable materials, the cover assembly guards against wear and tear, preventing scratches and damage to both the floor and your refrigerator legs. Installing this part is straightforward, allowing you to restore your fridge's original look with ease. The Refrigerator Front Leg Cover Assembly also helps to minimize movement and reduce noise, contributing to a more stable and quieter kitchen environment. By choosing this genuine OEM part, you ensure compatibility and longevity, keeping your Samsung refrigerator functional and aesthetically pleasing for years to come. Whether you need to replace a missing cover or repair a damaged one, this cover assembly is the ideal solution to maintain the integrity and performance of your refrigerator.

The Toe Grille Clip is an OEM part for LG refrigerators. This part secures the toe grille to the base of the refrigerator, ensuring it remains in place while providing easy access for cleaning and maintenance. 

Causes of a bad Toe Grille Clip can include breakage due to accidental impacts during cleaning or general wear and tear over time. 

Symptoms of a faulty Toe Grille Clip include:

• The toe grille coming loose or falling off
• Difficulty attaching or detaching the grille for routine maintenance
• Visible damage or deformation of the clip
• Unusual gaps between the grille and the refrigerator base

This OEM LG part is also compatible with some Kenmore models.

This is the lower front grille for select appliances. It finishes the base opening and helps channel airflow to the condenser area while protecting components from bumps and debris.

• Covers the lower front opening and provides a clean, finished look
• Helps direct cooling airflow to the condenser compartment
• Shields components from minor impacts and debris
• Common signs it needs replacement: cracked or missing grille, broken mounting tabs, grille won't stay attached, rattling from a loose or damaged panel

• Disconnect power before servicing; use proper PPE
• Remove existing fasteners or release tabs, then pull the old grille straight off
• Align the new grille and secure with the original screws/clips as configured
• Do not overtighten fasteners; ensure even engagement of all tabs

This refrigerator kickplate grille mounts across the lower front of the cabinet to cover the machine compartment while allowing proper airflow. Replacing a broken or missing grille restores a clean finish and helps keep debris away from internal components.

• Covers the lower opening and helps shield the condenser area from bumps and debris
• Helps direct air through the base for proper ventilation
• Restores a clean, finished appearance across the bottom front
• Typical symptoms: cracked or scuffed grille, broken mounting tabs, loose or won't stay attached, missing

• Disconnect power and wear work gloves to avoid sharp edges
• Open doors; on many models, pull the grille straight out to release spring clips. If screws are used, remove them from the base rail
• Align tabs/clips and snap or fasten the grille into place
• The grille is secure and clear of door swing and air inlets

This grill base is the lower grille support for your refrigerator that restores proper grille alignment and appearance. It helps secure the toe-kick area and maintains correct airflow under the cabinet base. What it does:

• Replaces a cracked, broken, or warped lower grille support that lets the grille sit unevenly
• Restores secure attachment of the toe-kick/grille so it doesn't rattle or fall out
• Helps maintain proper clearance and airflow at the refrigerator base
• Improves finished appearance of the appliance front when the original base is damaged

• Disconnect power to the appliance before accessing the base area
• Remove the existing lower grille or toe-kick per the appliance service guide to access mounting points
• Typically fastens with clips or screws—retain hardware if reusable and align carefully during installation

The Lower Front Grille is an OEM part for Frigidaire refrigerators. It is an exterior cosmetic part located underneath the refrigerator doors. The lower front grille protects internal components while maintaining an attractive facade.

Causes of a bad lower front grille can include dents, cracks or deformations from accidental bumps or impacts over time. The securing clips or fasteners may become loose or damaged.

Symptoms of a bad lower front grille include:

• Missing grille sections allowing access to internal areas
• Loose or sagging grille not sitting flush with the refrigerator paneling
• Appearance or aesthetics of the refrigerator front compromised

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This grille base assembly restores the lower front trim on compatible refrigerators, replacing a cracked, broken or missing lower grille and improving appearance and fit. It arrives ready to install for a clean, finished look. What it does:

• Replaces the lower/front grille panel to restore the cabinet's appearance
• Covers the refrigerator toe-kick area and helps direct airflow at the base
• Fixes common symptoms like cracked, broken or detached lower grille pieces
• Helps prevent debris from entering the lower cabinet area

• One grille base assembly (white) as shown

• Disconnect power to the appliance before beginning any service
• Typically fastens with visible screws and snap clips; remove the old grille prior to installing the new piece
• Use gentle prying to release clips to avoid damage to surrounding trim