Refrigerator Handle

This replacement door handle restores a secure grip for opening and closing the dryer door, making it easy to access the drum and load laundry. It fits the original handle location and matches OEM form and function. What it does:

• Replaces a cracked, broken, or missing dryer door handle for reliable opening and closing
• Restores a solid grip when pulling the door open
• Stops the handle from wobbling or coming loose during normal use
• Helps ensure the door latches and aligns properly when closed

• One (1) door handle

• Disconnect power to the appliance before beginning any repair
• Typical installation requires removing the dryer door panel or accessing mounting screws; a screwdriver may be needed
• Handle attaches with screws or clips—align carefully and tighten snugly without over-torquing

The Refrigerator Door Handle Bar is an essential component for maintaining the functionality and appearance of your Samsung refrigerator. Crafted as a genuine OEM part, this handle bar ensures a perfect fit and reliable performance. Made from durable materials, it withstands daily use, providing a sturdy grip for easy opening and closing of your refrigerator doors. Installing this handle is straightforward, allowing you to restore your appliance's functionality without hassle. The sleek design seamlessly integrates with your existing refrigerator, maintaining its original look. By choosing this genuine OEM part, you ensure compatibility with a wide range of Samsung refrigerator models, guaranteeing a secure and lasting installation. Replacing a damaged or worn-out handle with the Refrigerator Door Handle Bar not only enhances the usability of your fridge but also preserves its overall aesthetic. Invest in this high-quality handle bar to enjoy a dependable and efficient refrigerator experience once again.

This genuine replacement door handle restores a secure, easy-to-grip surface for opening and closing your refrigerator door. It replaces a cracked, broken or worn handle so the door can be operated safely and comfortably. What it does:

• Provides a solid grip for opening and closing the refrigerator door
• Replaces handles that are cracked, broken, loose or cosmetically damaged
• Helps prevent further damage to the door edge caused by using a damaged handle
• Restores original appearance and functionality

• One refrigerator door handle

• High-level, basic replacement — typically mounts with screws or fasteners hidden under a trim/cover; use appropriate hand tools
• Support the door during removal/installation to avoid stressing the hinges or other components
• Tighten fasteners until secure but avoid over-torquing to prevent cracking the handle
• Wear protective gloves and follow appliance safety guidance; disconnect power only if required by your appliance's service instructions

This small handle assembly replaces a worn or damaged door handle to restore a clean, secure grip and normal door operation. It's a direct-fit hardware piece used on compatible GE refrigerators and freezers. What it does:

• Provides a finished grip surface for opening and closing the door
• Replaces cracked, loose, or broken small handles
• Helps eliminate rattling or poor door alignment caused by damaged handle hardware
• Restores the original look and functionality of the appliance door

• Basic hand tools may be required;
• Disconnect power and remove food from the door area before starting work to avoid injury
• Handle screws and trim must be tightened to manufacturer torque—do not overtighten to avoid cracking

This is a refrigerator door handle. This particular handle is white in color. If the door handle becomes cracked or broken due to forceful impact with another object, or due to normal wear and tear over a period of time, it will need to be replaced with this part. Another reason that this part will need to be replaced is if it breaks off of the appliance itself and cannot be reattached. Replacing this part is very easy. All that is needed for this procedure is a screwdriver.The door handle is compatible with refrigerators that are made by the GE and Samsung brands. It is sold individually and is sourced directly from the manufacturer.

The Fastener Handle Assembly is an OEM part for GE refrigerators, specifically designed to securely attach the refrigerator or freezer handle to the door. This assembly includes the necessary components, such as screws or bolts, brackets, and possibly end caps, depending on the design, to ensure a sturdy and durable connection between the handle and the door. 

Causes for a Fastener Handle Assembly to fail include normal wear and tear from repeated use, excessive force applied to the handle, or corrosion of metal parts due to moisture and refrigeration environment.  

Symptoms of a bad Fastener Handle Assembly include:

• A loose handle that moves or wobbles when touched or used.
• Difficulty in opening the refrigerator or freezer door due to a compromised handle attachment.
• Visible damage or wear to the components of the fastener assembly 

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Color: Stainless

The Door Handle is an OEM part for Whirlpool refrigerators. It provides an ergonomic grip that allows for easy opening and closing of the refrigerator door. The handle bears the inward force across the door to deliver smooth operation with each use.

Causes of a bad door handle can include cracks, breaks or wear to the plastic over time due to repeated opening/closing motions. Physical damage from impact is also a possible cause of handle failure.

Symptoms of a bad door handle include:

• The handle no longer securely holds the door closed
• Difficulty opening the door without the handle assistance
• Cracks or breaks visible in the plastic
• Loose, sagging or misaligned handle placement

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement screw fastens appliance panels and components securely. Replace a missing, stripped, or corroded original to restore a tight fit and help prevent rattling, vibration, and gradual loosening of assemblies.

• Secures panels, brackets, and internal assemblies to the frame
• Replaces damaged or missing hardware to maintain proper fit
• Helps reduce vibration, noise, and movement caused by loose parts
• Supports correct alignment at the original mounting points

• Disconnect power and shut off water or gas before service.
• Match the original screw's location and length; replace one at a time if needed.
• Use the correct driver/bit and avoid overtightening to prevent stripping plastic or metal.
• Reuse any washers or clips only if in good condition.

The Handle Door WW is an OEM part for GE refrigerators. It is the outer door handle component that is grasped to open and close the refrigerator door. 

The proper function of the handle is important to allow convenient access to food storage. Causes of a bad handle can include wear and tear over time, as well as damage from excessive force or impacts. 

Symptoms of a bad refrigerator door handle include:

• Difficulty grasping or turning the handle firmly  
• Looseness, wobbling or falling off from the door surface
• The handle not engaging properly to open the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

Color: Stainless

The Door Handle is an OEM part for Whirlpool refrigerators. It is a component that facilitates easy access to the fresh food and freezer compartments. The handle interfaces directly with users to open and close refrigerator doors.

Causes of a bad door handle can include wear and tear over time from repeated use, or damage such as cracks, chips or breaks from accidental impact. Temperature fluctuations from frequent door openings can also cause handles to warp or fail prematurely.

Symptoms of a bad refrigerator door handle include:

• Difficulty opening or closing the refrigerator door
• The door not latching securely
• Internal components like springs or cables becoming loose or worn

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Refrigerator Handle is an OEM part for Frigidaire side-by-side refrigerators. It provides a grip point to easily open and access fridge and freezer compartments. The handle must withstand constant use without breaking or losing functionality. 

Symptoms of a bad refrigerator handle include:

• Difficulty opening the refrigerator door  
• Loose, jagged, or unstable handle grip that poses a safety risk
• Cracks, chips or damaged plastic compromising structural integrity

Causes can be wear over years of heavy usage, exposure to heat or cleaning chemicals accelerating degradation, or physical impact resulting in breaks.

This OEM Frigidaire replacement handle is also compatible with some Electrolux, Crosley, and Amana refrigerator models.

The Freezer Door Handle is an OEM part for Frigidaire refrigerators. It is responsible for facilitating easy access and opening of the freezer door. The handle is designed for comfort and a secure grip, allowing smooth operation of the door with minimal effort. 

Causes of a bad door handle can include normal wear and tear over time from frequent use, accidental damage from impact or mishandling, or components wearing down due to stress.  

Symptoms of a bad door handle include:

• Difficulty opening or closing the freezer door  
• The handle being loose, wobbly, or improperly secured
• Breakage or cracking of handle components
• Inability to open/close door without two hands

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Handle is an OEM part for Whirlpool refrigerators. An external component consumers interact with daily, the handle provides access to chilled storage compartments.

Symptoms of a bad handle include:

• Difficulty opening refrigerator doors smoothly
• Loose or detached handle assembly  
• Inability to open refrigerator fully for easy access
• Failure of locking/closing mechanisms

Causes may include normal wear over extended use. Plastic components can weaken from repeated opening/closing of heavily weighted doors.

This quality OEM Whirlpool replacement handle ensures dependable operation for the life of your refrigerator. Sturdy construction and precise fitment guarantee seamless access to food and beverages. This part is also compatible with Maytag, Roper, Amana, Jenn-Air, and select Kenmore models.
 

This replacement refrigerator door handle restores safe, secure grip and normal door access after a worn or broken handle. It matches OEM fit and finish to keep the door looking and functioning like new. What it does:

• Provides a secure handhold to open and close the refrigerator door
• Replaces cracked, loose, or missing handles that affect door operation or appearance
• Maintains proper clearance and alignment for normal door movement
• Helps prevent injury from sharp or broken handle edges

• Use the appliance power and water disconnect procedure recommended by the manufacturer before beginning work
• Remove trim or screws as needed to access handle fasteners; keep fasteners for reassembly unless new hardware is explicitly included
• Tighten screws evenly to avoid misalignment or cosmetic damage
• If door or trim is bent or damaged, inspect assemblies before installing the new handle