General Electric Refrigerator Handle

The Handle is an OEM replacement part for GE refrigerators. It is the outer component that allows for opening and closing access to the refrigerator or freezer compartment drawer.

Causes of a bad handle can include normal wear over time as handles experience constant friction from opening and closing.

Symptoms of a bad handle include:

• Loose, sagging, or unstable grip that does not feel secure
• Broken, cracked, or disconnected parts
• Chipped or faded surfaces affecting the appearance
• Difficulty or inability to open the drawer

This GE replacement part is specifically designed to provide a long-lasting replacement. This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

The Fresh Food Door Handle is an OEM part for GE refrigerators. This handle is attached to the refrigerator's fresh food compartment door, providing a sturdy grip for opening and closing the door. Measure: Depth 20 in, Height 3.5 in, Width 3.75 in

Causes of a bad fresh food door handle can include regular wear and tear, accidental impact, or over-tightening of screws during installation. A damaged handle can hinder the door’s operation and affect the refrigerator's usability.

Symptoms of a bad fresh food door handle include:

• The handle being loose or wobbly
• Cracks or visible damage on the handle
• Difficulty in opening or closing the refrigerator door
• The handle completely detaching from the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Crisper Pan Handle is an OEM replacement part specific to GE bottom-mount refrigerators. It attaches to crisper drawers located in the refrigerator compartment. These drawers are designed to optimize the storage of fruits and vegetables in adjustable humidity conditions. The handle measures about 16 inches wide by 2 inches high by 2 inches deep.

Causes of a bad crisper pan handle include cracked or broken plastic, detached mounting from normal use, or worn-out connector pins.

Symptoms of a bad crisper pan handle consist of:

• The handle no longer securely attached to the crisper drawer
• Difficulty opening or retrieving items from the drawer
• Excessive side-to-side play or instability in the handle connection

This OEM GE replacement part is compatible with bottom freezer models produced under GE, Hotpoint, RCA, and some Kenmore brands.

The Freezer Door Handle is an OEM replacment part for GE refrigerators. This handle allows for easy opening and closing access to frozen food items.

Causes of a problematic handle could include cracked or broken mounting posts after years of use. UV exposure from sunlight may also degrade surface plastics or discolor the finish.

Symptoms of a bad freezer handle include:

• Difficulty opening the door without both hands
• The handle detaching completely from the door
• Inability to securely latch or close the freezer door
• Stress cracks or aged discoloration of plastics

This GE OEM part is also compatible with Hotpoint, RCA and select Kenmore models.

The Handle is an OEM replacement part for GE Refrigerators. It allows for convenient access and opening of the refrigerator or freezer door. The handle is designed to withstand frequent use and open and close smoothly without issue. 

Symptoms of a bad Handle include:

• The handle is loose or wobbly
• Difficulty in opening the refrigerator door
• The handle detaching from the door
• Visible cracks, breaks, or wear on the handle

Causes of a bad Handle can be regular wear and tear over several years of use, Handle damage from being pulled too forcefully, or impact damage from moving or transporting the Refrigerator improperly. 

This Genuine OEM GE replacement Handle is also compatible with some Hotpoint, RCA and select Kenmore refrigerators.

The Handle Door FF is an OEM part for GE refrigerators. This handle is designed for the refrigerator's fresh food compartment door, providing a sturdy and reliable grip for easy opening and closing of the door. 

You should replace the handle door if it becomes damaged or loose, which can occur due to frequent use, accidental impacts, or wear over time. A faulty handle can make it difficult to open or close the refrigerator door properly.

Symptoms of a bad handle door include:

• Cracks or breakage in the handle
• The handle feeling loose or wobbly
• Difficulty in gripping or operating the handle
• The handle detaching from the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replace a worn or broken fresh food door handle with this color-matched bisque handle to restore a solid, comfortable grip and clean appearance on your refrigerator's main compartment door.

• Provides the handhold to open and close the fresh food door
• Worn, loose, cracked, or missing handle can make the door hard to open and detract from appearance
• Color: Bisque, for models that use a bisque fresh food handle
• Restores proper feel and operation when opening the refrigerator section

• Unplug the appliance or disconnect power before servicing
• Open the door to access handle screws; support the handle as you remove fasteners
• Transfer any end caps or mounting screws from the old handle if your model reuses them
• Tighten all screws securely and check for firm, wobble-free fit

The Freezer Door Handle Assembly is an OEM part for GE refrigerators. It provides a sturdy grip for opening and closing the freezer door, ensuring easy access to the freezer compartment. This handle is designed to fit securely on the door, enhancing both functionality and the overall appearance of the appliance.

Causes of a bad door handle assembly can include regular wear and tear, accidental impacts, or improper installation. Over time, these factors can lead to the handle becoming loose, cracked, or broken, making it difficult to open or close the freezer door properly.

Symptoms of a bad freezer door handle assembly include:

• Loose or wobbly handle
• Visible cracks or damage
• Difficulty in opening or closing the freezer door
• The handle detaching from the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This freezer door handle assembly replaces a damaged or loose handle and restores a secure, comfortable grip. Finished in bisque to match your appliance, it refreshes appearance and helps the door open and close as intended.

• Provides the exterior grip for opening and closing the freezer door
• Attaches to the door's factory mounting posts/brackets and secures with screws or set screws (varies by model)
• Restores original look with a matching bisque finish
• Common symptoms: cracked, broken, or missing handle; handle feels loose or will not stay tight

• Wear gloves and keep the door closed for stability during replacement
• If present, remove trim caps; loosen set screws or mounting hardware and lift off the old handle
• Position the new handle on the mounting posts/brackets; tighten hardware until snug; reinstall caps
• Do not overtighten; verify the handle is aligned and secure before use

Color: white. It measures about 16 inches wide by 2 inches high by 2 inches deep.

The Door Handle is an OEM part for GE refrigerators. This part provides a secure and comfortable grip for opening and closing the refrigerator door.  

Causes of a bad door handle can include regular wear and tear, accidental impact, or repeated use, which can lead to cracks, breaks, or loosening of the handle.  

Symptoms of a bad door handle include:

• The handle feeling loose or wobbly
• Difficulty in opening or closing the door
• Visible cracks or breaks in the handle
• The handle detaching from the door

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part is a lower tail handle. This is a genuine OEM part made by General Electric and has been sourced directly from the manufacturer. This part is intended to replace a broken or detached tail handle on multiple different models and brands of refrigerators. The tail handle fixes to the exterior of the refrigerator. A missing or broken tail handle can prevent the door from functioning properly. The tail handle can become detached from the appliance with regular use and may require replacement. Always ensure the appliance is disconnected from its power source before attempting any repairs. Take appropriate safety precautions and wear protective work gloves. Proper tools are needed to install this part. For more accurate installation information on how and where to install this replacement lower tail handle, refer to the original manufacturer diagrams or owner's manual.As an authentic replacement part, this lower tail handle is suitable for use on various models of refrigerators manufactured by General Electric and Hotpoint. Please note that this is a genuine part made of high-quality and durable plastic and is sold individually.

This fresh food door handle restores a secure, comfortable grip for opening the refrigerator compartment. Replace a cracked or loose handle to improve everyday use and keep your fridge looking clean and intact.

• Provides a solid handhold to open and close the fresh food (refrigerator) door
• Replaces broken, cracked, or missing handle
• Addresses a loose or wobbly handle that won't stay tight
• Helps restore original fit and appearance when installed with the correct hardware

• Protect the door finish with a soft cloth and wear work gloves
• Use the correct hex/Allen or Torx driver for your model's handle fasteners
• Align the handle on the mounting points and tighten screws evenly—do not overtighten
• If your model uses decorative end caps, transfer them from the original handle

This door handle fastener secures the refrigerator handle to the door so it stays tight and aligned. Replace a missing or stripped fastener to eliminate wobble and restore a solid, reliable grip.

• Attaches and locks the handle to the door or handle mounting point
• Maintains proper handle alignment and feel during daily use
• Common fix for a loose, wobbly, or falling-off handle
• Replace when the original fastener is missing, stripped, or damaged

• Protect the door finish with tape or a cloth around the work area
• Support and align the handle; start the fastener by hand to avoid cross-threading
• Tighten with the correct driver (hex/Allen or Torx, depending on model) until snug; do not overtighten

This is the freezer door handle that provides a sturdy, comfortable grip to open and close your freezer door. Replace a cracked, loose, or discolored handle to restore a clean appearance and confident feel.

• Provides the factory grip and leverage for opening/closing the freezer door
• Replaces a broken, loose, missing, or heavily worn handle
• Can help when the door is hard to open due to a damaged or absent handle
• Restores the original look on compatible models

• Disconnect power before servicing; work carefully to protect the door finish
• Support the handle during removal to prevent scratching
• Transfer any decorative end caps/covers from the old handle if your model uses them and align with existing mounting points
• Tighten fasteners evenly; do not overtighten

Color: White