Refrigerator Knob, Dial & Button

This is a push-button replacement used on compatible Bosch appliances to restore proper user-control operation and tactile feedback. Install the button to replace a broken, worn, or missing control button and regain reliable front-panel input. What it does

• Provides a tactile surface for operating a specific front-panel control or selector
• Replaces cracked, stuck, or missing buttons that prevent reliable input
• Restores proper actuation so the underlying switch can be pressed cleanly
• Helps avoid accidental presses from damaged or loose buttons

• One push-button

• Disconnect power to the appliance before attempting any repairs
• Usually snaps into the front panel; remove the control panel or trim if needed to access the button
• Inspect the underlying switch for damage and replace it if the button alone does not restore function

A replacement rotary control knob that restores reliable user control of a front-panel selector. Replaces a worn, cracked, or missing knob to make settings easy to select and read. What it does:

• Provides a tactile grip for turning the appliance selector or temperature dial
• Replaces broken, loose, or missing knobs that slip or won't engage
• Helps restore accurate selection of cycles, temperatures, or functions
• Visible indicator aligns with the control shaft for clear setting reference

• Disconnect power to the appliance before starting any work.
• Most control knobs simply pull straight off the shaft; some models use a small retaining screw—inspect before removal.
• Align the knob's indicator with the control shaft and press firmly until seated.

This body control is the electronic control board that manages the appliance's main functions and user interface so cycles and features run as commanded. It replaces a failed control board to restore normal control operation. What it does

• Receives input from buttons/knobs and directs cycle start/stop, timers, and feature selection
• Controls power distribution to motors, valves, heaters, and other subsystems through relays and signals
• Helps prevent or indicate errors when the control senses faults or unsafe conditions
• Faulty boards may cause the unit to not respond, fail to start cycles, show unresponsive buttons, or display error codes

• One body control electronic board

• Disconnect all power before accessing or replacing the control to avoid shock or damage
• Handle the board by its edges and avoid static discharge; use an ESD strap if available
• Verify connector orientation and secure all wiring harnesses before restoring power

A direct-replacement thermostat knob that restores a solid, easy-to-use control interface so you can select temperature settings by hand. Fits the factory control shaft and replaces a missing, cracked or worn knob. What it does

• Replaces a damaged or missing thermostat/control knob so you can adjust temperature settings.
• Slides onto the control shaft and provides a tactile grip for turning the thermostat.
• Helps stop slipping or loose control action caused by worn or broken knobs.
• Useful when the original knob is cracked, stripped, or hard to turn.

• Always disconnect power to the appliance before servicing.
• Pull the old knob straight off the control shaft; align splines and push the new knob fully onto the shaft.
• Do not force or rotate the shaft while installing; ensure the knob indexes to the correct setting position.

This control knob replaces a worn, broken or missing range/oven temperature or function knob so you can safely and accurately set burner and oven controls. Designed to restore a secure grip and clear position indication. What it does

• Fits onto the stove or oven control shaft to select burner heat or oven settings.
• Restores a solid grip and clear pointer for accurate temperature and function selection.
• Commonly used when knobs are cracked, stripped, loose, or completely missing.
• Works with standard push-on control shafts; does not include internal switch components.

• Install by aligning the knob on the control shaft and pushing firmly until seated.
• If knob feels loose, inspect the control shaft or replace the keyed adapter if damaged.
• Always turn controls to OFF and disconnect power at the breaker or unplug the appliance before servicing.
• Do not force a stuck knob; check for debris or damage to avoid breaking the new knob.

This knob thermostat replaces a worn or broken temperature control knob to restore reliable temperature selection and user control. It provides a direct, easy-to-use interface for adjusting oven or range heat settings. What it does

• Acts as the user-facing control for selecting oven or range temperature or heat settings.
• Restores tactile control when original knob is cracked, stripped, or loose.
• Helps resolve symptoms such as unresponsive controls, inability to change temperature setting, or a knob that spins without engaging.
• Works with the existing control shaft and mounting hardware to re-enable normal operation.

• Disconnect power to the appliance before beginning any work to avoid electric shock.
• Pull the old knob straight off the control shaft; some models may require removing a retaining clip or bezel—keep hardware for reinstallation.
• Push the new knob onto the shaft until it seats; it engages and turns the control smoothly.
• Test the control after restoring power; if the control shaft or internal switch is damaged, additional parts or service may be required.

This control knob fits onto the control shaft to let you adjust settings on your refrigerator. Replacing a cracked or missing knob restores smooth adjustments and keeps the control easy to use.

• Attaches to the control shaft to select temperature/settings
• Common fix for a knob that is cracked, stripped, loose, or missing
• Helps when the knob spins without engaging the shaft or falls off
• Restores proper feel for everyday adjustments

• Unplug the refrigerator before working near the control area
• Pull the old knob straight off—avoid prying on the panel
• Align the flat/D-shaped opening with the shaft and press firmly until seated
• If the knob won't seat, inspect the control shaft for damage before forcing

This left-hand humidity slide mounts on the crisper cover and links to the vent so you can open or close it. Replacing a damaged slide restores smooth control of your crisper's humidity setting and vent movement. What it does:

• Connects to the crisper cover vent to adjust airflow/moisture control
• Restores smooth sliding action on the left side of the humidity control
• Helps ensure the vent door opens and closes when the slider is moved
• Common symptoms: broken/missing slider, won't stay in place, vent doesn't move with the control

• One left-hand humidity slide

• Unplug the refrigerator; remove the crisper drawer(s) for access
• Note left-hand orientation and slider track position before removal
• Transfer and reuse any original clips/retainers as needed
• Seat the slide fully and test the vent linkage for smooth travel before reassembly

This right-side humidity slide replaces the movable vent on a refrigerator crisper to help you adjust airflow and humidity levels for stored produce. It restores proper vent operation so drawers can better retain moisture. What it does:

• Opens and closes the crisper vent to control airflow into the drawer
• Helps maintain intended humidity balance for fruits and vegetables
• Replaces a cracked, stuck, or missing right-side humidity slide
• Resolves symptoms like a jammed vent, drawer with poor humidity control, or visible damage to the slide

• Disconnect power to the appliance before starting any repair
• Typically installs by snapping into the drawer vent track; avoid forcing parts
• Inspect surrounding tracks or brackets for damage and clean track debris before installing

Replacement slide rail that guides and supports a drawer or rack, restoring smooth, level movement and helping prevent sagging, sticking or noisy operation. Use this slide to replace worn or broken guides that interfere with normal travel. What it does:

• Guides and supports the drawer or rack for consistent open/close action
• Restores alignment to reduce sagging, catching or uneven travel
• Reduces noise and jerky motion caused by worn or damaged slides
• Replaces a failed guide so the drawer/rack stays on its intended track

• Disconnect power to the appliance before servicing.
• Remove the drawer or rack and support components during removal to avoid drops.
• Inspect mounting clips or tabs and replace any broken hardware; align slide with factory mounting points before fastening.
• Test full travel several times after installation; stop and re-check alignment if binding or noise persists.

This temperature control knob replaces a worn or broken fridge temperature dial so you can set the refrigerator temperature accurately. It restores a solid grip and clear pointer for reliable, easy adjustments. What it does:

• Fits onto the temperature control shaft to select colder or warmer settings
• Provides a clear pointer for precise temperature selection
• Replaces cracked, stripped, or missing knobs that make adjustments difficult
• Helps eliminate loose or slipping knob operation

• One temperature control knob

• Push-fit installation onto the control shaft; no special tools typically required
• Ensure power is off and remove food before working in the appliance for safety
• Inspect the control shaft for damage; replace the control if the shaft is stripped