General Electric Refrigerator Knob, Dial & Button

The Humidity Control is an OEM part for GE refrigerators. This component regulates the humidity levels within the crisper drawers, ensuring optimal conditions for preserving the freshness and longevity of fruits and vegetables. By controlling the humidity, it helps to prevent produce from drying out or becoming too moist.

Causes of a bad humidity control can include mechanical failure, damage from spills or impacts, and wear and tear over time. Additionally, issues with the connecting cables or electronic controls can also lead to malfunction.

Symptoms of a bad humidity control include:

• Produce spoiling faster than usual
• Visible condensation or dryness in the crisper drawers
• Difficulty adjusting the humidity settings
• The humidity control lever or switch not functioning properly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Color: white. Measures about 3-1/2 inches wide by 1 inch high.

The Humidity Control Slide is an OEM replacement part for GE refrigerators. This slide is responsible for adjusting settings inside the refrigerator such as the crisper humidity levels. Proper functioning of the humidity control slide allows for optimization of storage conditions based on the specific items stored.

Causes of a bad humidity control slide can include normal wear and tear over time, as well as issues like damage or obstruction that prevent the smooth operation of the slide mechanism.

Symptoms of a bad humidity control slide include:

• Inability to adjust crisper humidity levels
• Setting gets stuck on maximum or minimum humidity
• Storage results remain consistently too dry or too moist regardless of the setting

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This dial installs on the refrigerator chill/pan control to let you set the compartment temperature. Replacing a broken or loose dial restores proper control and makes adjusting the chill drawer quick and reliable. What it does:

• Rotates on the chill/pan control shaft to change the compartment temperature setting.
• Replaces worn, cracked, or missing dials that are hard to turn or don't stay set.
• Helps address inconsistent deli/drawer temperatures when the control dial fails.
• Matches the original OEM shape for correct fit and alignment on the control shaft.

• Always unplug the appliance or shut power to the refrigerator before servicing.
• Remove the drawer/pan or access panel as needed to reach the control shaft.
• Pull the old dial straight off the shaft and press the new dial onto the shaft until fully seated; avoid forcing at an angle.
• After installation, restore power and verify the dial turns smoothly and adjusts the compartment temperature setting.

This small replacement button glide restores smooth, reliable button movement on the appliance control panel, helping buttons press and release correctly for consistent operation. What it does:

• Provides a low-friction surface for control panel buttons to slide on
• Helps prevent buttons from sticking, binding, or feeling uneven
• Restores proper seating and tactile feedback for worn or damaged buttons
• Useful when buttons wobble, catch, or fail to make consistent contact

• Disconnect power (unplug or shut off circuit breaker) before servicing the control panel
• Typically accessible from the front control bezel; remove trim or key assembly as needed
• Handle small plastic parts carefully to avoid breaking tabs; reassemble trim in original order

This shutter slide is the replacement slide mechanism that supports and guides a refrigerator's internal plastic shutter or slide panel, restoring smooth opening and closing and helping keep contents accessible and secure. What it does:

• Guides and supports the shutter/slide panel so it moves smoothly along its track
• Prevents the shutter from sticking, binding, or uneven movement
• Maintains proper alignment of the shutter to help seal and protect contents
• Common symptom: shutter or sliding panel falls, jams, or moves unevenly

• One shutter slide (single slide mechanism)

• Basic hand tools may be required; follow manufacturer instructions for proper removal and installation
• Power off and empty the area around the shutter before starting to avoid damage or injury
• Inspect mating tracks and fasteners; replace any damaged clips or screws as needed

This shutter slide is the replacement guide that lets a refrigerator dispenser door open and close smoothly, helping keep the dispenser sealed when not in use and preventing drafts or debris entry. Fits the dispenser shutter assembly for proper operation. What it does

• Guides and supports the dispenser shutter so it opens and closes smoothly.
• Helps keep cold air and contaminants out of the dispenser area when closed.
• Reduces sticking, jamming, and rattling of the dispenser door.
• Commonly replaced when the dispenser shutter is loose, misaligned, or won't move.

• One shutter slide.

• Disconnect power before starting any work to avoid shock.
• Access may require removing the dispenser bezel or inner door panel; keep fasteners organized.
• Inspect the shutter and surrounding tracks for damage or debris and clean before installation.

This control knob replaces a worn, broken or missing range/oven temperature or function knob so you can safely and accurately set burner and oven controls. Designed to restore a secure grip and clear position indication. What it does

• Fits onto the stove or oven control shaft to select burner heat or oven settings.
• Restores a solid grip and clear pointer for accurate temperature and function selection.
• Commonly used when knobs are cracked, stripped, loose, or completely missing.
• Works with standard push-on control shafts; does not include internal switch components.

• Install by aligning the knob on the control shaft and pushing firmly until seated.
• If knob feels loose, inspect the control shaft or replace the keyed adapter if damaged.
• Always turn controls to OFF and disconnect power at the breaker or unplug the appliance before servicing.
• Do not force a stuck knob; check for debris or damage to avoid breaking the new knob.

This control knob fits onto the control shaft to let you adjust settings on your refrigerator. Replacing a cracked or missing knob restores smooth adjustments and keeps the control easy to use.

• Attaches to the control shaft to select temperature/settings
• Common fix for a knob that is cracked, stripped, loose, or missing
• Helps when the knob spins without engaging the shaft or falls off
• Restores proper feel for everyday adjustments

• Unplug the refrigerator before working near the control area
• Pull the old knob straight off—avoid prying on the panel
• Align the flat/D-shaped opening with the shaft and press firmly until seated
• If the knob won't seat, inspect the control shaft for damage before forcing

This replacement knob fits the temperature control on the refrigerator's chill/deli/snack pan. It restores your ability to adjust airflow to the drawer so you can set the pan to a colder or warmer setting when the original knob is broken or missing. What it does:

• Attaches to the chill/deli pan temperature control to regulate cold-air flow into the drawer
• Restores user control of the drawer's colder/warmer setting
• Typical symptoms include a cracked or missing knob, a knob that won't stay on, or slipping/stripped engagement
• May help if the drawer setting can't be adjusted because the knob is damaged

• 1 control knob

• Unplug the refrigerator before servicing
• Remove the deli/snack pan for access to the control shaft
• Align the knob with the shaft and press on firmly until fully seated
• Reinstall the pan and restore power; verify the control turns smoothly

This left-hand humidity slide mounts on the crisper cover and links to the vent so you can open or close it. Replacing a damaged slide restores smooth control of your crisper's humidity setting and vent movement. What it does:

• Connects to the crisper cover vent to adjust airflow/moisture control
• Restores smooth sliding action on the left side of the humidity control
• Helps ensure the vent door opens and closes when the slider is moved
• Common symptoms: broken/missing slider, won't stay in place, vent doesn't move with the control

• One left-hand humidity slide

• Unplug the refrigerator; remove the crisper drawer(s) for access
• Note left-hand orientation and slider track position before removal
• Transfer and reuse any original clips/retainers as needed
• Seat the slide fully and test the vent linkage for smooth travel before reassembly

This right-side humidity slide replaces the movable vent on a refrigerator crisper to help you adjust airflow and humidity levels for stored produce. It restores proper vent operation so drawers can better retain moisture. What it does:

• Opens and closes the crisper vent to control airflow into the drawer
• Helps maintain intended humidity balance for fruits and vegetables
• Replaces a cracked, stuck, or missing right-side humidity slide
• Resolves symptoms like a jammed vent, drawer with poor humidity control, or visible damage to the slide

• Disconnect power to the appliance before starting any repair
• Typically installs by snapping into the drawer vent track; avoid forcing parts
• Inspect surrounding tracks or brackets for damage and clean track debris before installing

This right-hand humid slide window is the replacement sliding cover that helps control humidity access in the appliance's humidifier compartment, restoring proper airflow and moisture separation for produce storage. What it does

• Replaces a worn or cracked right-side humid slide window to restore proper sealing and airflow.
• Helps maintain intended humidity levels in the compartment by closing or opening the humidifier passage.
• Reduces drafts and prevents excess moisture transfer that can lead to premature produce wilting.
• Visible cover piece — damaged or cloudy windows can make sealing and humidity control less effective.

• One right-hand humid slide window (single piece as shown)

• Remove power to the appliance or unplug before servicing to avoid electrical hazard.
• Handle the plastic part carefully to avoid cracking; use gentle pressure when sliding into place.
• Typical installation uses existing mounting tracks or clips—retain existing hardware unless damaged.
• If seals, tracks, or adjacent parts are damaged, inspect and replace those components for a complete repair.