Refrigerator Leg Or Foot

This is the right side pan roller. For left side use WR2X8595.

This is the right side basket roller. For left side use WR2X8615.

This adjustable leveling leg replaces a damaged or missing support foot to keep the appliance stable and level on uneven floors, reducing rocking and improving door alignment. Easy-to-check, durable support for proper operation. What it does:

• Supports the appliance chassis and helps maintain proper leveling
• Lets you raise or lower the unit to correct tilt or uneven flooring
• Helps stop rocking, vibration, and uneven door gaps
• Can restore correct door and drawer alignment when a foot is broken or worn

• Raise or tilt the appliance per manufacturer guidance before removing/installing feet; use a helper for safety
• Hand-tighten and then adjust to level; avoid over-tightening to prevent damage

This axle wheel is a replacement drum support component that helps the dryer drum roll smoothly and quietly. Replacing a worn axle wheel restores proper drum alignment and reduces noise or binding during operation. What it does:

• Supports and centers the dryer drum on its axle so the drum turns freely
• Replaces worn or damaged wheel surfaces that cause squeaks, grinding, or rubbing
• Helps prevent drum wobble and uneven wear on the drum seal or rollers
• Works as part of the drum support system to maintain smooth rotation

• One axle wheel

• Disconnect power before starting and work on a cool, empty dryer
• Removing the dryer front or drum may be required to access and replace the wheel
• Inspect other drum support components (rollers, glides, bearings) and replace as needed

The Refrigerator Rear Leg Assembly is an essential component for maintaining the stability and proper leveling of your Samsung refrigerator. This genuine OEM part is specifically designed to ensure a secure and precise fit, helping your appliance stay balanced and reduce unwanted vibrations. By replacing a worn or damaged rear leg, you can restore the original functionality of your refrigerator, enhancing its performance and extending its lifespan. The ASSY-LEG REAR not only supports the weight of the refrigerator but also contributes to a smoother operation, preventing unnecessary movement and ensuring that your kitchen remains quiet and efficient. Compatible with a wide range of Samsung refrigerator models, this genuine OEM part guarantees durability and reliability. Installation is straightforward, allowing you to quickly and easily fix any issues with the rear legs of your fridge. Trust the Refrigerator Rear Leg Assembly to provide the support and stability your Samsung refrigerator needs for optimal performance and a better overall user experience.

This leveling leg threads into the base to steady and properly level your appliance. Correct leveling helps doors align and seal and reduces rocking and vibration for quieter operation and better overall performance.

• Supports and levels the cabinet on uneven floors
• Helps doors align and close/seal correctly
• Reduces rocking, vibration, and rattling noises
• Restores stability when a foot is cracked, stripped, or missing

• Disconnect power before servicing; turn off water supply if moving a refrigerator
• Protect floors and get assistance to carefully tilt or reposition the unit if needed
• Thread the new leg by hand, then fine-tune height with a wrench while checking level front-to-back and side-to-side
• Adjust both sides gradually; do not overtighten or force if threads feel cross-bound

This bracket holder assembly is a structural mount used to secure an internal component, keeping it properly positioned during operation. Replacing a cracked or loose bracket restores support and helps prevent vibration, rattling, and misalignment.

• Provides a fixed mounting point to hold the supported part in place
• Maintains alignment to reduce vibration, rubbing, or noise
• Helps prevent shifting that can lead to premature wear
• Common symptoms: broken tabs or cracks, loose/misaligned component, rattling noises, visible damage to the old bracket

• Disconnect power; shut off water or gas if applicable
• Note screw locations and orientation; take a photo before removal
• Transfer any reusable clips or hardware from the old bracket
• Tighten fasteners evenly and avoid over-tightening to prevent damage

This mobility front assembly replaces the worn front caster/roller that helps a refrigerator glide when pulled out for cleaning or service. Restores smooth forward movement and stable front support for safe access. What it does:

• Provides a rolling front support so the appliance moves smoothly on the floor
• Helps stabilize the front of the refrigerator when it is pulled out or pushed in
• Reduces sticking and uneven movement caused by worn or damaged rollers
• Can help minimize scraping or surface damage during repositioning

• One mobility front assembly

• Disconnect power and, if applicable, water supply before servicing
• Empty or secure loose items and have a second person help when tilting or moving the appliance
• Remove the kickplate or access panel as required to reach and replace the front assembly
• Tighten fasteners to OEM torque and test mobility before returning the appliance to normal use

This leveler is the adjustable leg that helps stabilize and level your appliance, restoring balance and reducing vibration. It's a simple replacement to get a rocking or uneven washer or dryer sitting squarely again. What it does:

• Replaces a worn or damaged leveling leg to restore stable, level support under the appliance
• Allows height adjustment to compensate for uneven floors and reduce rocking or vibration
• Helps prevent door misalignment and uneven loads that can affect performance
• Commonly used when an appliance wobbles, shifts during cycles, or sits crooked

• Disconnect power to the appliance before attempting service; for washers, turn off water supply and drain hoses if needed
• Slide or tip the appliance as required to access the leveling legs; use caution and a helper for heavy units
• Adjust height by turning the leveler; verify stability with the appliance resting on all legs

The Leveling Leg is an OEM part for LG refrigerators. It is one of the four legs at the bottom corners that elevate and provide stability to the entire appliance.

Causes of failure can be broken mounting points that no longer provide secure elevation, full compression of the built-in cushioning, or damage from impact on an unlevel floor.

Symptoms of a faulty leveling leg include:

• Excessive shaking or vibrating of the refrigerator
• Door alignment issues where doors are difficult to open or close fully
• Visible leaning or misalignment of the refrigerator cabinet

This OEM LG part is also compatible with some Kenmore models.

This roller veg pan is the replacement roller assembly that supports and allows the refrigerator crisper/vegetable drawer to slide smoothly. It restores proper drawer movement and helps keep produce accessible. What it does

• Replaces worn or broken roller that supports the vegetable/crisper drawer
• Restores smooth sliding and alignment of the drawer in the refrigerator compartment
• Helps reduce sticking, scraping, or uneven drawer travel
• Commonly replaced when the drawer won't roll or is difficult to open and close

• One roller veg pan assembly (single drawer roller)

• Unplug or disconnect power to the appliance before any service to avoid injury
• Remove the crisper/vegetable drawer and lift or unclip the roller housing per your model's instructions
• Slide the old roller assembly out and snap or screw the replacement into place; test drawer operation before reloading

This roller supports the vegetable/crisper drawer so it slides smoothly in and out of the refrigerator. It replaces worn or broken rollers to restore proper drawer movement and reduce sticking or catching. What it does:

• Replaces a damaged or worn roller that prevents the veg/crisper drawer from sliding smoothly
• Helps eliminate drawer binding, uneven travel, or noisy movement
• Supports the drawer weight and keeps the pan aligned on its track

• Disconnect power to the appliance before starting any repair
• Remove the crisper/veg drawer and housing per your model's instructions to access the roller
• Roller typically snaps into a bracket or slides onto a pin; inspect mating parts and replace any broken clips