Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

8530995 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Washer Spring Mounting Bracket
Genuine Whirlpool part
By: Whirlpool
Part Number: WP64067

Secures suspension springs at the washer base to absorb vibrations. Replace if cracked, worn, or broken to restore proper drum stabilization.

Do-It-Yourself Stories from Customers like You Loud banging and walking across floor on spin.   Sheila C. • Rutland , MA • January 20, 2024

I started with the suspension pad kit and the tub suspension pads. I do have to say if you have an older model washer (mine is approx 17 years old) be prepared to let the inner tub sit in penetrating oil for a few days before attempting to take the tub out. I was able to get to this point on my own and then it wouldn't budge. My husband ended up buying some direct drive tool (it was pretty cool) and was able to break the tub free after two days. Yay! From there he took the the inner tub and put... Read more

More
$9.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: W10854425

The Dryer Clip is an OEM component for Whirlpool electric and gas dryers. It securely fastens critical ductwork attached to the dryer cabinet. Over extended periods, the constant vibrations produced during tumbling cycles cause microscopic fractures or loosening within the clip material where it grips duct joints. 

Causes relate to ordinary fatigue from long-term resonance vibrations concentrated at anchoring points.

Symptoms involve:

  • Loose or detached venting/ductwork affecting airflow
  • Noticeable leaks emerging at separation interfaces
  • Reduced drying effectiveness due to compromised ventilation

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Dryer just needed some new parts   Kim K. • Murrieta , CA • November 01, 2020

The front panel clips needed to be replaced as they were bent and the some of the tabs for the bearing ring had broken off. Very pleased with the price, the parts and the quick delivery. Thank you. Read more

More
$15.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Motor Start Capacitor
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8572717

Washer just hums but won't start? The motor capacitor enables your washer to start and run. Easy 10-minute fix with our installation video guide.

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You When the timer was actuated the machine would only hum   Ernest Q. • Geneva , FL • December 11, 2015

Not knowing for sure that the problem was the capacitor, I was reluctant to purchase and replace the part. I went AppliancePartPros.com web site and clicked on the part replacement video.The repair video was short and well illustrated. Before the repair began, the service rep says, " the reason you would replace the capacitor is that after turning the timer on, the machine would just hum." The instruction video was the reason that I purchased the part at AppliancePartPros.com The part was... Read more

More
$61.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Front Leveling Foot
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10001130

The Front Leveling Foot is an OEM part for Whirlpool washing machines. It is designed to support and stabilize the washer by allowing users to adjust the height and level the appliance on uneven floors. Proper leveling ensures smooth operation and minimizes vibrations and noise during wash cycles.

Causes of a bad Front Leveling Foot can include physical damage from excessive force, wear and tear from frequent adjustments, or corrosion due to exposure to water or laundry chemicals. Over time, these factors can compromise the foot’s ability to maintain stability, leading to operational issues.

Symptoms of a bad Front Leveling Foot include:

  • The washing machine rocking or wobbling during operation
  • Increased vibration and noise
  • The washer being unlevel, affecting wash performance
  • Difficulty in adjusting the foot

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Shakes and moves
See more...
Do-It-Yourself Stories from Customers like You It would act like its out of balance on the spin cycle even with no water or clothes in it no one had the answer even local repair people untill i found a youtube on out balance on spin cycle   Carl W. • Glendale , AZ • June 27, 2015

REPLACING THE SUSPENSION PADS AND REPLACE THE BALNCE RING EVEN IF MY DIDN'T LEAK ANY FLUID OUT OF IT... IT SOLVE THE PROBLEM, IT WORKS BETTER NOW THAN IT EVER DID, THE ONLY THING I COULD COME WITH IS THE MANUFACTURE PUT THE WRONG BALANCE RING IN IT TO START WITH... MY IS A 400 KENMORE TOP LOADER, IT IS THE EASIES WASHER I HAVE EVER TAKEN A PART.. I WISH CARS WERE THAT EASY... IT TOOK ME OVER A MONTH FIGHTEN THIS PROBLEM UNTIL I FOUND IT ON YOUTUBE... WHAT BLESSING IT WAS... Read more

More
$6.41

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Hose Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP596669

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

  • Leaks at the hose connection points
  • Hoses slipping off the connections
  • Visible rust or damage on the clamp
  • Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Will not stop filling with water
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You My washing machine smelt horrible   Bryan W. • Ogdensburg , NY • August 20, 2018

First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available.... Read more

More
$7.48

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Appliance Touch-Up Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017

Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.

Do-It-Yourself Stories from Customers like You Chipped paint   Thomas S. • Middletown , DE • September 03, 2014

Touch up paint Read more

More
$39.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Spin Tube Thrust Washer
Genuine Whirlpool part
By: Whirlpool
Part Number: WP63292

The Spin Tube Thrust Washer is an OEM component for Whirlpool washing machines. It is a washer that fits around the agitator shaft and helps create a seal between the agitator shaft and the aluminum tub. This washer allows the agitator to spin freely during the wash and spin cycles without causing excessive vibration or noise. 

Symptoms of a bad spin tube thrust washer include:

  • Noises like banging or clunking coming from the agitator area
  • Shaking or vibrating of the washer tub during spinning 

Causes of a bad thrust washer include normal wear and tear after extended use. Exposure to extended periods of unbalanced loads can also put excessive strain on the washer components and lead to premature failure of the thrust washer seal.

This replacement part is also compatible with select Kenmore, Maytag, KitchenAid, and Jenn-Air models.

Do-It-Yourself Stories from Customers like You No spin every thing else worked made high speed ticking noise   Anthony D. • Follansbee , WV • May 12, 2015

First I looked at the many you tube vids, and there are many. appliance parts pros pretty much shows you how to deal with the parts. I changed the brake shoes and the clutch assembly which also comes with the driver cam. I also changed the metal brake operating cam. I think that brake lockup or improper brake release was the problem that broke the plastic cam driver. This was the broken plastic part making all the ticking noise. I first changed the coupling on the motor but that wasn't bad. in... Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Suspension Spring Retainer
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10145155

Secures suspension springs to the washer tub assembly. Replace if cracked, worn, or missing to prevent tub instability during wash and spin cycles.

Do-It-Yourself Stories from Customers like You Tub out of alignment violent wobbling during spin cycle   Stephani W. • Folsom , CA • January 29, 2018

When I removed the cabinet, all of the springs appeared in tact, I had already replaced the counter balance spring so I knew that was not the issue. None of the suspension springs or brackets were broken but they did look worn/rusty so I replaced all of the brackets (2 in front and 1 large in back), all of the suspension spring retainers, and all of the suspension springs and it fixed the issue! I plan to also replace the Self leveling leg spring which is an easy fix since it's on the back of... Read more

More
$6.41

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Appliance Spray Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930

Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.

The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.

The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage. 

Symptoms needing for Appliance Spray Paint include:

  • Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
  • A desire to refresh or update the appearance of the appliance without the need for complete replacement
  • Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

 

Do-It-Yourself Stories from Customers like You Leaking diaphragm   Herbert S. • Monroe Township , NJ • January 03, 2015

Replaced It With New One Read more

More
$36.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Push Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90296

The Push Clip is an OEM replacement part for Whirlpool dryers. Situated internally near the rear cylinder wall, it firmly secures the drum support roller assembly.

Causes of failure relate to fatigue from years of absorbing drum impacts and associated mechanical stresses. Corrosion penetration if moisture enters the clip mounting area increases operational resistance over time as well.

Symptoms consist of:

  • Uneven drying and weakened tumbling action inside the cylinder
  • Vibration or noise emerging from the rear roller area
  • Premature wear signals stemming from dislocated roller assembly

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

This part fixes the following symptoms
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Screaching noise   Linda Z. • Kailua Kona , HI • February 06, 2015

Followed the video- opened the front of the dryer and removed the drum. It was evident that one of the wheels had worn and wasn't turning freely like the other one. The video showed how to remove the roller. Very simple process and now the dryer works just fine. Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Retainer Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546127

The Retainer Clip is an OEM replacement part for Whirlpool direct drive washing machines.

Causes of a bad retainer clip can include wear and fatigue from continuous vibration over many wash cycles. Cracks or breaks in the plastic material may develop as well.

Symptoms of a bad Retainer Clip include:

  • Water leaks detected around the pump area inside machine cabinet
  • Loosening of hoses or tubes interrupting proper drainage flow
  • Potential pump component detachment from disconnected lines
  • Damage to neighboring components submerged by leaked water

The OEM Whirlpool part is also compatible with Maytag, Jenn-Air, and select Kenmore models.

Do-It-Yourself Stories from Customers like You Water leak   Steven K. • New City , NY • August 10, 2018

Took off cover, installed new parts. Read more

More
$9.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Agitator Cap
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3355758

The Agitator Cap is an OEM part for Whirlpool washing machines. It fits on top of the agitator and helps secure the agitator components, ensuring proper functioning during the wash cycle. This cap is essential for maintaining the agitator's efficiency and preventing water from entering the agitator assembly.

Causes of a bad agitator cap can include wear and tear from regular use, cracking or damage from impacts, or degradation due to exposure to detergents and water over time.

Symptoms of a bad agitator cap include:

  • The cap being loose or not fitting properly
  • Water leaking into the agitator assembly
  • Excessive noise during the wash cycle
  • Reduced agitation performance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Broken upper section of our Whirlpool agitator also known as a filter   David I. • Heathsville , VA • September 04, 2019

Simply lift up the old filter and cap and discard it. The new assembly simply pushes down and on to the agitator base. It stays in place by clicking over a raised perimeter rib on the base. This is the easiest repair (short of screwing in a light bulb) that one could do. The hardest part was to identify which parts I needed to purchase. The parts associate at Appliance Pros was terrific in tracking down what was needed. Read more

More
$9.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Tub Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: W11095997

Seals the washer shaft to prevent water leaks from the tub during wash cycles. Replace if you notice water pooling under your machine. Verify fit.

Do-It-Yourself Stories from Customers like You Agitator would not work   David W. • Murfreesboro , TN • November 19, 2014

Used the parts and youtube video from your company. Read more

More
$23.61

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Top Panel Spring Clip Lock
Genuine Whirlpool part
By: Whirlpool
Part Number: WP18776

This small spring clip secures the top panel of the dryer to the cabinet frame. It snaps into place to hold the top firmly shut during operation. Replace this clip if your dryer's top panel feels loose, pops open during use, or won't stay latched when closed.

Do-It-Yourself Stories from Customers like You Clothes dryer drum stopped rotating   Edward J. • Eclectic , AL • February 20, 2015

Located model number and went to Appliance Parts Pros.com to check the repair instructions on belt and motor. Used the suggestions to diagnose problem as a broken belt. I also ordered two top locks to replace the originals that were very brittle plastic that broke when I opened the dryer. Ordered the parts on Presidents Day, and received the parts the next day. The dryer was back in service in 24 hours. Read more

More
$12.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Heater Box
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8541818

The heater box houses your dryer's heating element and screen. Replace this component when rusted, corroded, or the screen is damaged causing snags or stains.

Do-It-Yourself Stories from Customers like You The grill face in the dryer where the heat comes out was worn and had developed edges where clothes were catching and pulling thread   Willard W. • Rochester , NY • April 06, 2017

Replaced the heater tube. Had to open the back up, removed the heating element and then replaced the heater tube. Then I put it all together again and everything is fine now. Read more

More
$129.68

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Motor Coupling
Genuine Whirlpool part
By: Whirlpool
Part Number: 285852A

Washer won't spin or agitate? A worn motor coupling often causes these issues. This direct-drive part is DIY-friendly and takes 30-45 minutes to replace.

Do-It-Yourself Stories from Customers like You Washer would not agitate   Lewis B. • Easton , PA • April 25, 2014

Went to appliance parts pros and typed in the problem, and they had a video on that problem and how to fix it, easy fix, ordered the part, had it 2 days later, took my washer apart while I was waiting for the part to come, and then reviewed the video several times, and then completed my repair, probably saved 150-200 dollars by doing it myself, also had my dryer conk out last year, did the same thing, looked up the problem, ordered the part, and made the repair, the pair is 20 years old, parts... Read more

More
$32.64

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google