Kitchenaid Kgss907xsp01 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10131825
Oven won't heat properly or overheats? A faulty temperature sensor may be the cause. Simple 15-minute DIY repair with basic tools and our video guide.
This part fixes the following symptoms
-
Oven is too hot
-
Oven not heating evenly
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Dead control panel. Oven would not start. Mike H. • Cotopaxi , CO • April 12, 2022
I have a Whirlpool RBS245PDQ12 wall mount oven. Gathering information from AppliancePartsPros.com resulted in two possibilities: The Thermal Switch or the Control Panel. Talking with Appliance Parts Pros led to testing the Oven Temperature Sensor. It's supposed to test at 1080 Ohms at 70 degrees Fahrenheit. Mine tested at 960 Ohms so I knew it was bad... I found the service manual on the top of the Oven on the left behind the control panel. It has values for testing (Ohms of resistance)...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3368921
Torx screw secures burner assemblies, igniters, and internal components in gas cooktops and ranges. Replace rusted, stripped, or broken screws.
Do-It-Yourself Stories from Customers like You
Two of the ignition electrode was not working and the torx screws holding the burner assembly were rusted so badly they are broken during dissassembly Huseyin K. • Auburn , AL • October 27, 2014
I have tried to remove the burner assemblies by removing the torx screws but they were badly rusted, and unfortunately they all were broken during removal. I just discarded the ruined orifices and assembled the new orifices and burner assembly.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9759242
Oven won't heat after self-cleaning? This thermal fuse cuts power when overheating occurs. Common DIY repair takes under 10 minutes with basic tools.
This part fixes the following symptoms
-
Door won't open after self cleaning cycle
-
Element will not heat
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Stopped working while in self cleaning mode. Eberhard L. • Raleigh , NC • March 17, 2023
This is for the Whirlpool in-wall double oven GBD307PDS10. No power and the door locked after the shutdown before the self-cleaning cycle was over. I watched some video and this is a known issue the fuses blow during self-cleaning.
I opened the door with a 90-degree hook, an easy task. Took doors off (watch video from others), unscrewed from the wall, and made a very small platform. and took the oven out (need two people and take the doors off first. The doors are heavy and you won't lift the...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11675844
Seals your oven door to prevent heat loss and maintain cooking temperatures. Replace if worn, cracked, or heat escapes. Confirm fit with your model.
Do-It-Yourself Stories from Customers like You
Heat loss due to old worn door gasket door insulation damaged Raymond M. • Mundelein , IL • February 09, 2016
Replacing the Door Gasket is very easy and will take about 2-3 mins per door. Simply remove the Gasket Retainer (1 screw), and pull off the old Gasket. Install the new gasket by simply pushing the gasket clips into the holes where the old clips came out from. Be sure to start gasket at the first hole either side of the Gasket Retainer and work your way around. Reinstall Gasket retainer.
The Door Insulation is a very involved repair, and best to follow specific repair manual instructions. Door...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017
Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.
Do-It-Yourself Stories from Customers like You
Chipped paint Thomas S. • Middletown , DE • September 03, 2014
Touch up paint
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930
Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.
The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.
The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.
Symptoms needing for Appliance Spray Paint include:
- Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
- A desire to refresh or update the appearance of the appliance without the need for complete replacement
- Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9760574
Replacement door hinge for wall ovens. Supports the oven door for smooth opening and closing. Replace if bent, broken, or door won't stay horizontal.
Do-It-Yourself Stories from Customers like You
Kitchenaid oven hinge replacement Ray H. • Niwot , CO • March 11, 2017
Oven door would no longer close completely, ordered replacement hinges, 30 minute repair.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10179152
Replace your worn, warped, or missing oven rack. This durable rack installs inside your oven cavity to hold cookware and allow proper air circulation.
Do-It-Yourself Stories from Customers like You
I ordered to wrong part which did not fit when received Michael A. • Chula Vista , CA • August 20, 2015
Contacted Ashlee in the Customer Service Department of AppliancePartsPro and she not only explained the return policy but help ensure that I ordered the correct parts for my Whirlpool oven.
She was wonderful and it was truly great customer service. I will continue to do business with this company.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8273062
This range screw is an OEM replacement part sourced directly from the manufacturer for gas stove burners. These screws attach the ignitor to the burner. Screws may corrode and rust during everyday use. Spills and accidents on the range top may leak down to the screws and cause them to become worn. Screws are not considered part of the ignitor kit or burner kit and will need to be purchased separately. If the screws appear rusty or corroded while replacing the ignitor, it is beneficial to replace them. It is a good idea to purchase the screws at the same time as the parts are purchased so that they are available when needed. A Phillips head screwdriver is necessary to remove and replace the old screws. Make sure the power and gas are disconnected before installing the new screws.This screw is made of silver metal and is a Phillips head screw that is sold individually. Verify the number of screws needed before ordering. This screw is designed for use in gas ranges manufactured by Whirlpool, KitchenAid, Roper, Estate, Inglis, Maytag, Amana, Jenn-Air, and Crosley.
Do-It-Yourself Stories from Customers like You
Worn top burner igniter John D. • Huntington Beach , CA • January 01, 2018
Replaced old igniter. also purchased new screws for burner and igniter assembly since old screws were corroded from spilled food/fluids etc over the years. made the installation much easier. If you need to replace a worn igniter, do yourself a favor and go to hardware store and get matching replacement screws or buy new with igniter. Now my front right burner lights every time with just a click or two. Very pleased.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9759225
Replaces the inner heat-resistant glass panel in your oven door. Needed when glass is cracked, shattered, or broken during cleaning or use.
Do-It-Yourself Stories from Customers like You
Broken glass door. Jon E. • Portola Valley , CA • August 01, 2017
Replaced it myself.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10331686
The Spark Module is an OEM replacement part for Whirlpool ranges. It is an electrical component that generates the spark needed to ignite the gas burners. By sparking consistently and reliably, the module allows the cooktop burners to ignite with each use.
Causes of a bad spark module can include normal wear and tear over time, exposure to moisture or residue, or issues with the electronic components that produce the spark.
Symptoms of a bad spark module include:
- Burners that will not ignite or light consistently
- Burners that ignite but then immediately go out
- Only some of the burners lighting while others do not
- A clicking sound coming from the ignitors but no visible spark
Note: For harness from spark module to igniters use part number 9756892.
This OEM Whirlpool replacement spark module is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Kitchen Aid range. The bake and broil burners would not ignite. Johnathon M. • Olympia , WA • January 05, 2022
I purchased a new igniter for the bake assembly and found that it, unfortunately, did not resolve my problem. I measured the resistance of the different points on the gas valve and it was reading within spec so I then purchased this spark module and it did the trick.
My gas range is a Kitchenaid kgsk901sss02. I had a LOT of trouble finding where the spark module is located, and eventually found a schematic that shows it's location behind the front control panel of the oven.
Upon taking the...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10491985
The Range Screw is an OEM part for Whirlpool ranges. It is a small but essential component used to secure various parts and panels of the range. It is designed to fit securely into pre-drilled holes, holding components tightly in place.
There are a few factors that can lead to a bad Range Screw. Over time, screws may become loose or stripped due to frequent use or inadequate tightening. Accidental cross-threading or overtightening can also damage the screw or the surrounding components.
Symptoms of a bad screw may include loose or wobbly parts, rattling noises during operation, or difficulty in keeping components securely attached. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Oven door outer glass was broken Slydell B. • Cape Coral , FL • November 26, 2014
Using the parts I ordered, I replaced the glass myself following the very helpful video on your web site.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90767
The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.
This part fixes the following symptoms:
- Loose or wobbly components within the appliance
- Panels or parts that are not securely attached
- Rattling or unusual noises due to loose parts
- Damaged or missing screw
The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Certain buttons were'not working Brent T. • Easton , MD • November 17, 2014
One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS!
p.s. In doing my research come to find Maytag did little to insulate control panel from oven...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4449154
Heating element not working? This mounting screw securely fastens the heating element in place. A simple DIY repair that takes about 20 minutes to complete.
Do-It-Yourself Stories from Customers like You
Our broiler coil had a blister in it and wasn't working Stephanie M. • Brentwood , TN • September 10, 2016
We ordered the part and one extra screw(which we didn't end up using). If possible take door off your oven for easy access and have lighting source to see well. Taking part out was easy. Putting back in was more difficult because you have to match up two layers of parts in our oven. The broiler coil and the broiler shield above it. We used small craft clothes pins to keep wires from going behind the built in oven. We used a small diameter screw driver to match up holes before putting...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8054129
The Spark Igniter is an OEM replacement part for Whirlpool gas ranges. Located inside the oven cavity it initiates combustion using high-voltage electricity. This is a broil igniter for the upper (broil) burner.
Causes of malfunction relate primarily to element degradation from extended heating cycles. Exposure to grease or other residue accumulation shortens the service life by insulating the hot surface.
Symptoms involve:
- Inability to ignite gas burners using the automatic igniter
- Safety issues arise requiring manual lighting with matches or lighters
- Difficulties baking or broiling without consistent flame generation
- Element replacement prevents further problems and safety hazards
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
-
Gas igniter glows, but will not light
See more...
Do-It-Yourself Stories from Customers like You
The oven would light for a few seconds then turn off and at times would not light at all. Agnessa K. • Antelope , CA • March 14, 2014
Called a repairman and he told us we needed to change a bunch of parts and would cost over $400! Decided to do some research online and found suggestions to replace the spark igniter. Decided to give it a try. Took about 10min to replace and oven is now working perfectly, for a total of $30!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10058460
Adjustable leveling leg installs on the front or rear corners of your range. Replace if broken, cracked, or worn to stabilize and level your appliance.
Do-It-Yourself Stories from Customers like You
Anti tilt bracket for stovetop oven Richard O. • Levittown , PA • October 11, 2019
Installed it according to video watched.
Read more
More