Glh566eesb4frigidaireside Parts

I had to remove my dryer so I could install a new floor. The dryer would not fit through the doorway with the power cord attached. Since the power cord was fastened to the back using 3 phillip headed screws, I gently backed them out with a phillip headed screwdriver. However, two of the 3 screws gave me extreme trouble. The head of the screws were made of such a weak metal, that the screw head began stripping. I have a phillip screw kit with different sized heads, so I picked a head that... Read more

I wasn't sure if it was the door being warped, the spring return being worn, or the rotary damper failing, so I ordered all to update the door mechanism. I also ordered a new micro switch since one of the switches had started to require more and more pressure to actuate. Figured I'd fix it at the same time. Repair was very straightforward and the videos available on this and other repair sites were very helpful. I found a video that showed replacing the door mechanism on a nearly identical... Read more

• Leaking

Took off cover, installed new parts. Read more

I had purchased a model refrigerator that did not come with the deli/meat pan, and I was told by the manufacturer's customer service department that my purchased model was not designed with the item. I made comparisons with other models that had the deli/meat pan and found that the shelving alignments were the same so I decided to improvise and install the deli/meat pan. The manufacturer's customer service department did assist me with obtaining the appropriate part numbers and I placed the... Read more

• Not dispensing water

I watched a video on YouTube that walked me step by step through the repair. Read more

The parts I purchased from Appliance Parts Pro fit perfectly and were reasonably priced. I received them the next day, which made the Wife (and me) very happy. Although Appliance Parts Pro did not have a repair video for this, I was able to find one online and the machine is washing like new again. The website is well laid out and easy to find what your looking for. Between the available parts and the videos they provide, anyone who is reasonably handy should be able to repair their machine as... Read more

Replaced ignitor with a new one. Should have tested old one before installing. New one did not work either. Traced problem back to defective thermo fuse by testing with a multimeter and found circuit open. Bought a new fuse and replaced. Ignitor cycling as designed now. Apparently fuse failed due to excessive heat. I will also replaced dryer vent hose and and clean out vent line. Read more

I wasn’t sure where I could get parts for the fridge, Google brought me here. Super easy to look up model #’s and locate parts by type/location with the appliance map. I needed to change the racks and the doorstop. The racks were super simple. I would have succeeded with the doorstop too, but the holes at the bottom are stripped and the doorstop wasn’t secured correctly in the first place. So that’s frustrating, but appliance parts pros were easy to use, parts came quickly and The video from... Read more

One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more

• Won't start
• Freezer section too warm

Looked for obvious signs of mal-function, burned wires, etc. I found that the compressor controller(attached to the compressor) had an obvious burned-out spot. Took a chance that was the problem (it was); ordered all new OEM parts, including a new timer and run capacitor (a part that kicks in every time the compressor starts). I received the parts at 1 PM EST; by 1:48 PM I had the freezer working. Easily saved $250.00. A nice aside was that an Internet competitor was asking $53.00 for the same... Read more

Removed complete housing, including the actuator to dispense ice; plastic cemented, with reinforcing strips of cloth to reinforce repair on left hand side of assembly. Then installed new actuator part from Appliance Parts, plugged in wires, then had to plastic cement the pack on back of the new actuator back on, as it had come loose. Reassembled all, and finally managed to get the water discharge tube back through the hole, than replaced the flat strip connector & replaced all screws. Works... Read more

• No heat or not enough heat

I ordered the parts through AppliancePartsPros.com. They were delivered the next day. I installed them and the dryer works great. Read more

I ordered a freezer temperature control. I ordered from you because parts are certified. Last thing I wanted was to go through the replacement process with a part that didn’t work. I’m not a handy person by nature, and I have zero common sense. I watched the awesome instructional video that you provided with my order several times. Before receiving or even opening the package, I felt that I knew what to expect because I watched the video so many times. Before beginning, I made sure I had as... Read more

This issue was with a refrigerator that we acquired with a house we bought. The freezer was cold, making ice well, overall doing great. The refrigerator was not cold however. I had this issue with our own refrigerator in the past, and it was related to the defrost fan not working and the coils freezing up. However this refrigerator's coils had no ice buildup. Doing some searching on the internet I was able to narrow it down to the damper between the freezer and refrigerator not opening... Read more

Went to site at 4pm central, found part, watched repair video, ordered part, part arrived NEXT MORNING, replaced part, door works perfectly. Total time for web research, ordering AND repair: Less than 30 minutes. Total cost with delivery: $21.66. Door works just like new. It doesn't get any better than this folks. Read more

I wasn't sure if it was the door being warped, the spring return being worn, or the rotary damper failing, so I ordered all to update the door mechanism. I also ordered a new micro switch since one of the switches had started to require more and more pressure to actuate. Figured I'd fix it at the same time. Repair was very straightforward and the videos available on this and other repair sites were very helpful. I found a video that showed replacing the door mechanism on a nearly identical... Read more