Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Kbudt486a02 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Dryer Thermal Fuse
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3392519

Stop dryer downtime in its tracks — install the Whirlpool WP3392519 OEM Thermal Fuse in minutes.

OEM Quality Fast 1–2 Day Shipping* Free Tech Help

Why choose this fuse?

  • Guaranteed OEM: built by Whirlpool to Whirlpool specs — no risky aftermarket clones.
  • Broad compatibility: works with Whirlpool, Kenmore, Maytag, KitchenAid, Roper & more.
  • Quick delivery: over 94 % of APP orders arrive in 2 days or less.

Fixes these common dryer problems

Problem How the fuse is involved
Dryer won’t start Blown fuse interrupts motor circuit
No heat / not enough heat Heater circuit disabled for safety
Cycle ends early Over-temp trip stops cycle
Control panel dead Power to controls interrupted


4-step DIY installation (≈10 min)

  1. Unplug dryer and remove rear panel.
  2. Locate thermal fuse on blower housing.
  3. Transfer wires; secure new fuse with ¼-inch nut-driver.
  4. Clean the vent & lint path before testing to prevent repeat failure.

*Video tutorial below.

Ready to get heat back?
Click Add to Cart now & enjoy industry-leading 1–2 day delivery on

This part fixes the following symptoms
  • Won't start
  • Timer will not advance
  • No heat or not enough heat
  • Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You No heat   Dennis G. • Kearny , NJ • January 14, 2017

I did the recommended checks of parts as listed on the website. I would recommend as one other person did but I did not listen the first time and that is to check all the parts don't stop at the first part you find bad. As I had to make two orders paying shipping twice because I thought I found a bad part when testing the igniter but the thermal fuse was also bad and since in a different part of the machine I did not take the time to check it, bad mistake. Also one tool mentioned in the video... Read more

More
$16.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dishwasher Upper Rack Adjuster Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: W10712395

Replacement upper rack adjuster kit for dishwashers. Includes left and right side adjusters with rollers. Needed when original adjusters crack or break.

Do-It-Yourself Stories from Customers like You Top rack wheels broken off one side   Mike C. • Bowling Green , KY • January 03, 2020

The repair kit has everything needed for both sides of the rack but there were no instructions so it took me some time to figure out how it all mounted on the basket. The original design was totally different than the repair kit so it would have been very beneficial to have at least a diagram that showed how everything fit together. That being said, once I figured out how all the parts fit, then it was a very easy repair. You won't reuse any of the old parts except for the end caps that snap... Read more

More
$55.30

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Drum Belt 92-1/4" 4-Rib
Genuine Whirlpool part
By: Whirlpool
Part Number: 341241

Get your dryer spinning smoothly again - install the Whirlpool 341241 OEM Drum Belt in minutes.

Why this belt?

  • Exact factory spec: 92 ¼-inch length × ¼-inch width, 4 ribs / 3 grooves - built to Whirlpool standards, not a generic copy.
  • Broad compatibility: Fits most Whirlpool-made dryers - Kenmore 110-series, Roper, Estate, Maytag, KitchenAid, Admiral, Crosley, Amana & more.
  • Quiet, durable rubber: Reinforced EPDM resists cracking and stretch for years of reliable tumbling.

Fixes these common dryer problems

Problem How the belt solves it
Drum won’t turn Transfers motor rotation to drum
Loud squealing / thumping Replaces stretched or frayed belt
Burning-rubber smell New belt stops slippage & heat build-up
Damp clothes / long cycles Restores correct drum speed & airflow


DIY install — about 15 minutes

  1. Unplug dryer; remove lint screen housing & front panel.
  2. Release belt tension at idler pulley; lift drum slightly to slide old belt off.
  3. Loop new belt around drum, idler pulley and motor pulley (ribbed side down).
  4. Re-assemble, run test cycle - enjoy quiet, consistent tumbling.

This part fixes the following symptoms
  • Heat stays on after drum has stopped
  • Will not tumble
  • Touchpad does not respond
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You Broken dryer belt   Bob B. • St Louis , MO • September 12, 2015

Unpluged dryer first. Then took the lint filter out and removed the two philips screws inside the lint filter lid. Then take a paint scraper just under the top of the dryer two inches from the left front corner and pushed in a little to release the snap connector and did the same on the right side. Then lifted top over. Then take a 5/16 socket or nut driver and remove the two screws on on the left inside panel, then the right side. Lean front out a little and remove the two wires one the back... Read more

More
$14.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Range Bake Element
Genuine Frigidaire part
By: Frigidaire
Part Number: 316075103

Oven won't heat or bake properly? This bottom bake element converts electricity to heat for even baking. Simple DIY fix—2 screws, 2 wire terminals.

Do-It-Yourself Stories from Customers like You Bake element caught on fire and burned until it broke apart at one spot   Steve M. • Merritt Island , FL • July 04, 2014

It took no time to find where the problem was! I got my Frigidaire model number and got on-line with AppliancePartsPros.com where I have gone for over a decade for all my household repairs. Why? because they are honest, helpful, considerate, fast, and its easy to locate and SEE the exact part I need. 10 minutes after the burning of my element, one was in my cart and ordered! Done. TWO days later, the part arrived. I turned off the circuit breaker, unscrewed the two 1/4" screws and pulled off... Read more

More
$37.36

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Drive Belt
Genuine Ge part
By: Ge
Part Number: WE03X29897

Transfers power from motor to drum in your dryer. Replace if squeaking, not spinning, or visibly worn. Confirm fit with your model number before ordering.

Do-It-Yourself Stories from Customers like You Broken drum drive belt   Bourque, N. • Rosenberg , TX • October 31, 2016

First, I did a search based on the problem I had with my model of dryer. The model number was on the door frame and was visible when I opened the dryer door. The problem was, when I pressed the button to start a dryer cycle, I heard a clicking noise and the indicator text changed to "Drying", but I could not hear or see the dryer drum turning. The search led me to a page that indicated my problem was usually one of 3 common causes. 1. Faulty door switch 2. Broken Drum drive belt 3. burned out... Read more

More
$46.46

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dishwasher Cleaner Tablets, 6 Count
Genuine Whirlpool part
By: Whirlpool
Part Number: W10549851

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Do-It-Yourself Stories from Customers like You Color change went from black to stainless steel   Wayne J. • Harleysville , PA • January 12, 2019

Very smooth. I ordered the door and the control panel. It is helpful to have an extra set of hands when removing the screws from the door or place something under it so it doesn’t drop. The door comes off with about 10 screws. They are different length. Short screws go into steel, long go into plastic. Remove the door and upper facia/control panel. You’ll need to disconnect the wires. The panel has two parts that need to be transferred. 1. The electronic panel. It’s white and has a row of... Read more

More
$9.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dishwasher Lower Spray Arm
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304517203

Replaces a cracked, broken, or damaged lower spray arm in your dishwasher. Snaps into the bottom sump assembly. Essential for proper water distribution.

Do-It-Yourself Stories from Customers like You Lower spray arm on the dishwasher had broke   Michael K. • Hardyville , KY • August 26, 2017

Ordered replacement part. came within 6 days , it fit perfectly, and was easily installed. the right fix at a great price, very happy with results Read more

More
$43.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Run Capacitor
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10662129

The Run Capacitor is an OEM part for Whirlpool appliances, designed to provide the necessary electrical charge to start and run the compressor motor. This part attaches to the compressor to aids in maintaining a consistent motor speed and ensuring smooth operation. The run capacitor plays a crucial role in the appliance's electrical system, storing and releasing energy as needed to power the motor.

Causes of a bad Run Capacitor include electrical surges, wear and tear over time, or overheating, which can lead to a failure in providing the necessary start-up energy or maintaining motor speed.

Symptoms of a bad Run Capacitor include:

  • The appliance does not start.
  • The motor shuts off shortly after starting.
  • The appliance is humming but not running.
  • Increased energy consumption.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Too warm
  • Clicking sound
  • Won't start
  • Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You Both the freezer and refrigerator stopped cooling   Raymond O. • Kerrville , TX • April 11, 2015

I have a Kitchen Aid side by side refrigerator/freezer which is 8 years old. One day it just stopped cooling. At first I was just going to junk it and purchase a new one. However, I took off the lower back cover and noticed the compressor was not running. I knew from experience that these compressors need a starter capacitor and relay and it is not uncommon for these parts to fail. I looked on the Internet for a video which showed how to remove the parts. I also found a video which showed how... Read more

More
$45.30

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dishwasher Heating Element
Genuine Ge part
By: Ge
Part Number: WD05X30818

Dishes not drying or staying wet after cycle? This heating element heats water during wash and dries dishes after rinse. DIY-friendly replacement part.

Do-It-Yourself Stories from Customers like You Dishwasher was not heating water and dishes were coming out wet and cold no steam at all   James C. • Lubbock , TX • February 15, 2019

I followed the directions on several websites for repairs. The obvious place to start is the heating coil and thermostat. I checked the continuity of the coil and it was good with a reading of almost zero resistance. Next I read that there is no thermostat controls on my GE dishwasher so I followed another webpage that said the Sensor Turbidity Assembly acts like a thermostat so I replaced that. Wasted effort as that switch sensor was OK. Normally it has a light on when it is working, a... Read more

More
$54.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Refrigerator Defrost Thermostat
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10225581

Freezer icing up or not defrosting? This refrigerator defrost thermostat monitors evaporator coil temperature. DIY repair in 15-30 minutes with video.

This part fixes the following symptoms
  • Frost buildup
  • Freezer not defrosting
  • Freezer section too warm
  • Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You Fridge side wasn't staying cold massive ice build up in freezer ice blockage in fan duct   Christopher M. • Yorba Linda , CA • December 15, 2014

Condenser was encased in solid block of ice due to automatic defrost not working. Replaced thermostat and ADC control board. Working fine now. Most tedious part was using a heat gun to melt all the ice off the condenser coils. You will need a couple small wire nuts to splice the new thermostat into the existing harness (they are not included). Service tech wanted over $400 to repair, fixed it myself for half that. Thanks ! Read more

More
$34.75

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Refrigerator Dispenser Control Bracket
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2180226

Control bracket secures switches and components in your refrigerator door dispenser panel. Replace if cracked, broken, or switch pins are damaged.

This part fixes the following symptoms
  • Not dispensing water
See more...
Do-It-Yourself Stories from Customers like You Water dispenser stopped working.   Mark S. • Eliot , ME • January 13, 2021

I watched the Appliance Parts Pros repair video and decided to remove the front panel to diagnose the problem. While the repair video is excellent, I could not remove the ice/water dispenser front panel with a putty knife. On my model, 106.56234400, there is no clip that can be released by sliding a putty knife up under the front panel. It took a little effort but I was able to pop the left lower corner clip just by pulling it out with my fingers. Once the cover was off I could see that the... Read more

More
$16.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Light Bulb
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22002263

Illuminates the dryer drum for better visibility when loading and unloading. Replace when bulb burns out or fails to light. Confirm fit with your model.

Do-It-Yourself Stories from Customers like You Squeaky noise and not fully drying   David H. • Santa Clarita , CA • September 20, 2019

Originally the dryer was squeaking a lot, so I purchased a new belt tensioner, but the original tensioner was an old-style no wheel tensioner, so that wasn't the source of the squeaking. I saw a lot of lint had built up inside the unit where there shouldn't have been that much. So I viewed a few videos on the Appliance Pros site and saw that the rear wheel guides were the cause of the squeaking and the rear felt drum and blower housing seal needed to be replaced. The rear blower housing was... Read more

More
$19.31

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Refrigerator Door Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: W11384469

Refrigerator light won't turn off or on? The door switch detects when the door opens and closes. Easy 5-minute DIY repair with a pick tool or scraper.

Do-It-Yourself Stories from Customers like You Fridge interior light kept going out   Phil D. • Phoenix , AZ • June 16, 2014

Replaced door switch - it took less than 5 minutes - works perfectly Read more

More
$30.54

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Drive Shaft Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2198628

The Drive Shaft Seal is an OEM part for Whirlpool washing machines. It plays a role in preventing water from leaking out of the tub and onto the drive system. This seal ensures that the connection between the drive shaft and the washing machine tub remains watertight, protecting the mechanical components from water damage and corrosion.

Causes of a bad drive shaft seal include aging and deterioration of the material, excessive load sizes that strain the washer, and foreign objects caught between the seal and the shaft, which can lead to tears or breaks.

Symptoms of a bad Drive Shaft Seal include:

  • Water leakage from the underside of the washing machine
  • Unusual noises during the spin cycle
  • A visible tear or damage to the seal itself
  • Increased vibration and movement of the machine during operation

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Ice would not dispense   Annie V. • Missouri City , TX • February 23, 2016

My refrigerator was not dispensing ice. I could hear the motor activating but noticed the ice auger was not turning. My old drive shaft was stripped on both ends. Video was very helpful and it was an easy fix for someone with little handyman experience. Received my order much faster than expected! The parts arrived the next day and paid for the standard shipping charge. I live in Texas. Read more

More
$12.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Refrigerator Water Filter
Genuine Whirlpool part
By: Whirlpool
Part Number: EDR5RXD1

Replace your refrigerator water filter every 6 months for clean, fresh-tasting water and ice. Simple twist installation. Verify fit with your model number.

This part fixes the following symptoms
  • Ice maker dispenses too little ice
  • Not dispensing water
  • Touchpad does not respond
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Blue light was on on the front of the refrigerator door   Elinor G. • Westhampton Beach , NY • August 25, 2014

I'm such a pro, I figured I needed a new hose for my water dispenser so I ordered it. When it arrived I called my handyman. He told me I did not need a hose I needed A cartridge. So I had to return the hose and order the cartridge! Your company was so cooperative and made the return so easy Thank you! Next time I call the handyman first! Read more

More
$64.50

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Refrigerator Ice Dispenser Guide
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2180224

Guides ice from the bucket through the dispenser chute. Replace if cracked, broken, or missing to prevent ice jams and ensure smooth dispensing.

This part fixes the following symptoms
  • Ice maker dispenses too much ice
See more...
Do-It-Yourself Stories from Customers like You Ice cube dispenser/flap was broken not actuating the ice bucket motor.   Peter P. • Sonoma , CA • July 24, 2023

Ice Door Kit, Control Bracket, and Ice Dispenser Guide were purchased. I followed two videos on replacing the parts. The Control Bracket WP2180226 / AP6005965, was straight forward and I discovered a snapped pin on the old bracket causing an electric switch to be out of place... that repair was easy. When it came to the hinges of the ice chute, I discovered the snap-in, on right side, of the hinge was cracked... this is why the pin escaped. This cracked part is molded into the entire... Read more

More
$16.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google