Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix a dishwasher that won't heat water or dry dishes properly. This heating element restores hot water cycles and sanitization. Moderate DIY repair.
After reviewing the other repair stories related to this "7 blinking light" syndrome, I contacted their support staff via Chat. I relayed my symptoms along with model number of dishwasher. She indicated that this would normally mean an issue with either the heating element, the high limit thermostat, or the control board. Since the control board was so expensive and (luckily) out of stock, I ordered only the heating element and the thermostat. After pulling out the dishwasher and removing... Read more
Fix standing water in your dishwasher bottom with a check valve replacement. Prevents backflow and improves cleaning. DIY repair in 30-60 minutes.
The odor in the dishwasher was due to scum buildup in the walls, the racks, and in the lower part of the drain below the lower rotating arm. One of the valves in the vertical tube was stuck in the open position; since the valves cannot be replaced, the entire tube needed replacement. The check valve probably needed no replacement, but once I opened the bottom part, I decided to replace it anyway. I used this Youtube video to replace the tube, open and clean the drainage part of the washer: ... Read more
Replacement wheel assembly for dishwasher lower rack. Snaps onto rack to allow smooth gliding along tracks. Replace if cracked, broken, or missing.
Parts snapped into place very easily. Appliance Parts Pros have always delivered on the right part, timely delivery and videos to help. I wouldn't go anywhere else. Read more
The Upper Dishrack Rail is an OEM replacement part for Whirlpool dishwashers. It guides upper racks in and out for easy access to dishes.
Causes of faulty rails can include worn rollers, broken clips, or stress cracks in modules after repeated cycles.
Symptoms of a bad upper dishrack rail include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Ordered the parts and followed the instruction videos that Sears provide, Initially tried to order parts from Sears directly but the web-page kept complaining about my shipping address. Their loss- no wonder they're going out of business. Also, should note that the original assembly was plastic but the replacement was metal. Sure sign of a crappy cost-cutting decision. Overall, very happy with Appliance Parts Pros! Read more
The Filter Assembly is an OEM part for Whirlpool dishwashers. This component is responsible for trapping food particles and debris, preventing them from recirculating during the wash cycle and ensuring that dishes come out clean.
Causes of a bad filter assembly can include accumulated debris, regular wear from repeated use, or damage from harsh cleaning agents. A compromised filter can reduce the dishwasher’s cleaning performance and lead to buildup inside the machine.
Symptoms of a bad filter assembly include:
Replaced filter. It works great now, no more brown spots. Read more
Dishwasher won't turn on or has no power? This thermal fuse kit protects against overheating. Simple DIY fix takes about 20 minutes with basic tools.
Checked online with app and figured out the most common cause of the problem after checking the most obvious causes. Ordered the fuse received on the second day. Installation was very simple and the dishwasher was again functional. Read more
Fix loud droning noise, poor cleaning, or groaning sounds. This dishwasher circulation pump and motor ensures water flows to spray arms. DIY repair in 45 min.
Replaced sump, wash pump, drain pump, diverter motor, and thermostat. Read more
Fix a dishwasher not filling with water by replacing the water level float lever. This lever regulates water levels and prevents leaks. Easy 15-minute DIY repair.
Ordered 6 parts from you thanks to your fantastic web schematic parts diagram received parts very fast changed parts easily and that leak stopped. Your company is a 5* operation hands down. Read more
The Tub Wheel Assembly is an OEM part for Whirlpool dishwashers. It consists of the wheels and their mounting components that facilitate the smooth gliding of the dishwasher rack in and out of the unit. This assembly is critical for the operation of loading and unloading dishes, ensuring that the racks move smoothly without jamming or causing damage to the dishwasher interior.
Symptoms of a faulty tub wheel assembly include:
The primary causes of wear or damage to the tub wheel assembly can include regular use, excessive load on the racks, or accidental force applied when loading or unloading dishes. These can lead to broken wheels or dislodged fittings, necessitating replacement to maintain functionality.
Replaced rollers which were easy except i had to pull the dishwasher about half way out of the cabinet Read more
Replacement upper dishrack for dishwashers. Holds dishes, glasses, and utensils during wash cycles. Replace if rusted, cracked, or broken tines damage items.
Kitchen Aid dishwasher is 11 years old, and the tines have been rusting and biting the dust one by over the last few years. Rather than further destroy my dishes by abrading them with rust particles, I decided to get new racks. They are terribly expensive, and I pondered getting a new dishwasher. It wouldn't be that much more expensive. But I love mine and how well it washes. It has a stainless interior, and all of the seals are in excellent shape. I didn't need any tools. (Although I'm a... Read more
Seals the dishwasher air vent to prevent water leaks during operation. Replace if you notice dripping under the vent or wet insulation behind the panel.
First tried replacing the seal around the door as that was the simple and most logical fix. Still leaked. Removed the front and upper panel to inspect. Found calcium deposit running down from under the Air Vent Assembly and wet behind the black stick-on insulation. Easy to trace the leak to the bottom of the door. => Ordered new Air Vent Assembly, gasket and Vent Deflector. Parts arrived. Took 5 minutes to remove upper panel. Removed the two wires from the Air Vent Assembly. Inserted a... Read more
Replaces cracked, broken, or missing lower spray arm in your dishwasher. Installs at the bottom of the tub to distribute water during wash cycles.
Screwed the new spray arm on. This dishwasher has been through 2 control panels, a spray arm, rack roller assembly, rollers, and far too much of my time, patience, and money. I'll never purchase another KitchenAid product. Read more
Fix blinking lights, won't start, or cycles not finishing? Replace your dishwasher's electronic control board. This 15-30 minute DIY repair can save $300.
We purchased the electronic control board (for 1/2 of what the technician wanted for the part), opened up the door to the dishwasher, took out the old board and put in the new one. It was a 15 minute repair and we saved almost $300 doing it ourselves! (Thanks to AppliancePartsPros.com and YouTube!) Read more
The Air Inlet is an OEM part for Whirlpool dishwashers. It draws in ambient room air to assist in drying dishes after wash cycles have been completed. With openings around its base, the air inlet facilitates airflow through the dish rack to evaporate residual moisture left on rinsed dishes. Causes of a bad air inlet can include cracks in the plastic preventing proper draw of air currents, or obstructions blocking air pathways. Symptoms of a bad air inlet include:
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
I replaced the seal which turned out to be a little tougher job than it was supposed to. Small screws and very limited space to get into. Use a magic nut driver or something to hold the screw. Read more
Bracket that secures the water level switch in your dishwasher. Replace if cracked, broken, or damaged, causing the switch to shift out of position.
Fix water leaking from the bottom or poor cleaning in lower rack. This dishwasher diverter cover protects internal valve components. Moderate DIY repair.
Replaced sump because the seal is not sold separately. You will need a skinny clamp after cutting the original swaged clamp off. Also Had to replace the cover as its seal is not sold separately either. Used dish soap on seals during assembly. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.