Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Lset80ace Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Range Rotary Switch
Genuine Lg part
By: Lg
Part Number: EBF62174906

Burner won't turn off or runs too hot? This rotary switch controls heating elements and temperature settings. Straightforward DIY replacement.

Do-It-Yourself Stories from Customers like You Burner would only run on highest setting   William L. • Fishkill , NY • March 06, 2026

Replaced knob controller. Read more

More
$97.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Lint Filter Screen
Genuine Whirlpool part
By: Whirlpool
Part Number: WP33001003

Traps lint and debris during drying cycles to prevent exhaust clogs and maintain efficiency. Replace when torn, damaged, or not catching lint properly.

Do-It-Yourself Stories from Customers like You Motor failure noisy squealing bearing followed by failure to run buzzing noise when start pressed   Kurt K. • La Center , WA • September 19, 2014

This was a Maytag DE312 actually a Whirlpool labeled as Maytag) and is 27 years old. Replaced motor, drive belt and drum rollers. One tricky part was the motor because the new motor comes with integral starter and it was necessary to cut off existing female spade connectors on some wires and crimp on new connectors. Instructions were adequate but need to be carefully followed and a decent electrical stripping and crimping tool must be at hand. I bought a new motor drive pulley because another... Read more

More
$30.54

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Thermostat
Genuine Lg part
By: Lg
Part Number: 6930W1A003X

The Magnetron Thermostat is an OEM part for LG microwaves and built-in ranges. Its primary function is to monitor the temperature and ensure that it remains within a safe operating range. If the temperature exceeds the preset limit, the thermostat will interrupt the power supply to the magnetron, preventing overheating and potential damage.

Causes of a faulty magnetron thermostat can include electrical malfunctions, component failures, or physical damage. These factors can result in issues such as erratic heating, microwave not heating properly, or the appliance shutting off unexpectedly.

Symptoms of a bad magnetron thermostat may include:

  • Microwave not heating food evenly or at all
  • Inconsistent or weak heating performance
  • Microwave shutting off or displaying error codes related to temperature issues

This OEM LG part can also be used on Kenmore/Sears appliances. 

This part fixes the following symptoms
  • Won't start
  • No heat
  • not self-cleaning
See more...
Do-It-Yourself Stories from Customers like You High temperature thermostat went bad after running self clean function   John V. • Longmont , CO • September 09, 2014

Did some Google searches and most comments concerning this issue on LG stoves indicated the high temperature thermostat malfunctions when using the self cleaning function. This malfunction causes complete loss of power for the entire stove and locks the oven door. Since I wasn't completely sure if it was the thermostat or where it was for that matter, I called a service tech to troubleshoot the stove. He was able to determine it was the thermostat and further tested his findings by... Read more

More
$23.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Washer Tub Bearing Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 6-2040130

Supports the inner tub for smooth spinning during wash cycles. Replace when you hear grinding noise or see water leaking from bottom center of tub.

Do-It-Yourself Stories from Customers like You Leakage from tub seal   Gabriel S. • Petaluma , CA • March 15, 2015

I ordered the tub seal and stem seal kits along with the much needed spanner wrench. After viewing the video online several times and taking notes along the way I was ready to tackle the repair. After taking everything apart, I cleaned all areas thoroughly then addressed the rusty areas and mineral deposits found in the tub. Soaking the tub in vinegar and baking soda overnight helped loosen the built up deposits enough so I could carefully scrape them off with a spatula. This was very time... Read more

More
$70.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Drum Roller Shaft Washer
Genuine Whirlpool part
By: Whirlpool
Part Number: WP312535

This is a small fiber washer that fits on the drum support roller shaft inside the dryer. It acts as a spacer and bearing surface to reduce friction and keep the drum roller properly positioned. Replace this washer if the dryer makes squealing, thumping, or scraping noises during operation, or if the drum rollers appear to wobble or wear unevenly.

This part fixes the following symptoms
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Very concerning loud thumping noise while running our dryer.   William M. • Sudbury , MA • July 20, 2019

In the past, I replaced some electronic components on our gas dryer, the solenoid and the electronic ignitor, but the rest of the dryer looked more difficult to repair if needed in the future. I was wrong. I went unto AppliancePartsPros.com and watched some repair videos on dryers like mine that make big thumping sounds while drying. This happened when I googled my dryer model number in an attempt to find out is capacity, because I wanted our new dryer to have the same capacity. I found out... Read more

More
$7.37

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Idler Arm Sleeve
Genuine Whirlpool part
By: Whirlpool
Part Number: WP315772

Protects the idler arm and ensures smooth belt tension operation in your dryer. Replace if you hear grinding noises or notice excessive arm movement.

Do-It-Yourself Stories from Customers like You The motor burned up after 28 years   Robert M. • Paw Paw , MI • December 20, 2016

I replaced the motor and all other moving components along with the felt drum seals.drum glides and drive belt. The wiring instruction is where i had the most problems. Because my wiring had only 4 wires in the harness not 5, and one was a different color then the instructions call out, I believe was because it might have been and older model. the instruction called for a gray wire but mine was white with a blue piggy back wire attached. but after finding a few videos on line i figured that the... Read more

More
$11.78

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Drum Felt Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WP314820

Prevents lint buildup and moisture escape between drum and front panel. Replace when cracked, flaking, or separated. Confirm fit with your model number.

Do-It-Yourself Stories from Customers like You Broken dryer drum belt in Maytag model lde8200acw   Jack H. • Kent , WA • December 24, 2019

Started my Maytag dryer (model LDE8200ACW) with a large load early Saturday morning and immediately heard a noticeable thumping noise as the drum turned. Opened the door and checked to make sure some of the laundry hadn’t wadded up and was causing the thumping. Restarted it but the thumping was still present. Did a google search for obvious possible causes for the symptoms but the only suggestion that made sense was to check and make sure the dryer wasn’t rocking on its feet. Checked and found... Read more

More
$30.54

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Water Inlet Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: 205613

The Water Inlet Valve is an OEM replacement part for Whirlpool washing machines. It is responsible for controlling the flow of water into the washer tub, ensuring the proper water level and supply for each wash cycle.

Causes of a bad water inlet valve can include sediment buildup or obstructions, electrical malfunctions, or normal wear and tear over time, leading to valve failure or improper operation.

Symptoms of a faulty water inlet valve include:

  • The washer not filling with water or filling slowly
  • Incorrect or inconsistent water levels during wash cycles
  • Water leaks around the valve or inlet area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models. 

This part fixes the following symptoms
  • No hot or cold water
  • Will not fill with water
  • Will not stop filling with water
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You 1 water leaking on the floor at left side and 2 occasionally tub filling a number of inches when sitting   Kenneth S. • San Carlos , CA • April 15, 2016

1. Sleeve for input, Injector valve, nozzle and seal for input fixed this problem. Probably the main part that was the trouble was a deformed Injector Valve which is a rubber tube with an internal retention groove at the wide part that grips the Nozzle. The Sleeve and the Nozzle are hard plastic parts that basically looked fine, but I replaced them anyway while I was in there. Additionally I replaced the rubber Seal for Input which seals the plastic input fitting to the tub just to make sure... Read more

More
$79.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Range Oven Knob Lever Support
Genuine Lg part
By: Lg
Part Number: MJH64334701

This is a lever supporter that sits behind the control knob on a range, providing structural support for the knob shaft and ensuring the knob engages properly with the selector switch or valve stem. It helps maintain correct knob alignment and rotational feel. Replace this part if the control knob feels loose, spins freely without engaging, or if the original support is cracked or broken.

Do-It-Yourself Stories from Customers like You Broke lever supporter on LG oven control knob.   Mark N. • Downingtown , PA • December 22, 2021

Replaced the cheap plastic lever supporter with another LG OEM cheap plastic lever supporter. I should have bought two as I can see this problem happening again. Job was a simple fix and only required a Phillips head screwdriver. I did not need to remove any connections as there was enough room and wire to pull out the oven control assembly and make the repair. One word of caution is to be careful as the sheet metal internal cover and bottom of the control knob panel is razor... Read more

More
$23.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Washer Damper Pad Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 203956

Three-pad kit that cushions and stabilizes the wash tub assembly. Replace when pads are worn, compressed, or missing to restore proper vibration dampening.

Do-It-Yourself Stories from Customers like You May tag washer bumper pads wore out   Larry W. • Hookstown , PA • November 18, 2014

I ordered parts from appliance parts pro at 3:30 on Friday and they were delivered at bout noon on Saturday the next day. Took the machine apart removed the old pads. With the directions in the packages put it back together and the wife ran 5 loads of clothes through it. Works great. Was awesome to get the parts so quick Read more

More
$38.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Washer Injector Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: WP216201

Fix water leaking from detergent dispenser area or inlet connections with this washer injector valve. Acts as siphon break in water supply system.

Do-It-Yourself Stories from Customers like You 1 water leaking on the floor at left side and 2 occasionally tub filling a number of inches when sitting   Kenneth S. • San Carlos , CA • April 15, 2016

1. Sleeve for input, Injector valve, nozzle and seal for input fixed this problem. Probably the main part that was the trouble was a deformed Injector Valve which is a rubber tube with an internal retention groove at the wide part that grips the Nozzle. The Sleeve and the Nozzle are hard plastic parts that basically looked fine, but I replaced them anyway while I was in there. Additionally I replaced the rubber Seal for Input which seals the plastic input fitting to the tub just to make sure... Read more

More
$20.38

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer High Limit Thermostat
Genuine Whirlpool part
By: Whirlpool
Part Number: WP303395

Dryer won't heat or overheats? High limit thermostat prevents overheating by shutting off heat at high temps. Easy DIY repair with video guide.

Do-It-Yourself Stories from Customers like You Would run fine but would not dry clothes something would not allow the dryer to heat   Todd K. • Burr Oak , MI • March 10, 2017

For several months we could smell a slight odor of propane in the laundry room and wondered why, just didn't seem like it was enough to be overly concerned, but thought something must be wrong with the dryer, but it was still working. We just didn't know how inefficiently. Then the extra time it took to dry a load of clothes progressively seemed to get longer, but things still seemed to work fine and the clothes got dried, given enough time. Then approximately 3 weeks ago we noticed the dryer... Read more

More
$38.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Washer Water Inlet Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001274

Washer not filling or filling slowly? The water inlet valve controls water flow into your machine. Common DIY repair takes 30 minutes with basic tools.

This part fixes the following symptoms
  • No hot or cold water
  • Will not fill with water
  • Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You Water dripping in tub thru fill spout while not in use   H Gene P. • Muskogee , OK • June 24, 2019

Replaced the water valve. Easy repair. The repair video was spot-on. Tools needed: Slip joint pliers for removing and attaching the hoses and moving the hose clip. 5/16 nut driver. Phone to take a picture so I could get the wires put back right. Shut off the water and unplug from power. Remove the hoses. Using a 5/16 nut driver remove the single screw that holds the bracket, lift bracket slightly and pull from the washer. There is a little slack in wires and fill hose to work with. Take a... Read more

More
$124.61

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP312967

The Clamp is an OEM part for Whirlpool dryers. This clamp ensures tight and secure connections within the dryer, particularly in securing ducts and vents that are essential for proper airflow and operation. 

Clamps may need replacement due to loss of tension, corrosion, or damage from regular use. A compromised clamp can lead to operational issues such as prolonged drying times or excessive noise, resulting from loose parts or improper ventilation.

Symptoms of a bad Clamp include:

  • Loose or detached vents or hoses, leading to inefficient dryer operation.
  • Increased drying times, as a result of compromised airflow from unsecured ducts.
  • Unusual vibrations or noise, indicating that internal components may not be securely fastened.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms
  • No heat or not enough heat
  • Takes too long to dry
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Lack of heat and long drying times   Allan H. • Baroda , MI • March 06, 2016

Our Maytag gas clothes dryer was not drying like it should/used to and was making a lot of noise. After researching online I figured the vent was partially blocked and/or the blower wheel was bad. When I took it apart, the vent had very little lint in the lower elbow exiting the back of the dryer but the blower wheel was loose on the shaft and was missing the clamp. I cleaned out the vent and put a hose clamp on the blower wheel to tighten it to the shaft and tried it again. The noise was... Read more

More
$11.78

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Hose Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP596669

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

  • Leaks at the hose connection points
  • Hoses slipping off the connections
  • Visible rust or damage on the clamp
  • Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Will not stop filling with water
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You My washing machine smelt horrible   Bryan W. • Ogdensburg , NY • August 20, 2018

First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available.... Read more

More
$7.48

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
E Ring
Genuine Whirlpool part
By: Whirlpool
Part Number: WP354987

The Idler Shaft Retaining Ring is an OEM replacement part for Whirlpool dryers. Also called an "E" ring, it is a sealing gasket positioned between the front and rear housing omponents. Maintaining an airtight seal prevents gas leakage and promotes efficient drying performance.  

Causes of a bad retaining ring commonly involve compression loss of the rubber gasket material over many years of heating cycles. Exposure to petroleum-based cleaners may prematurely deteriorate the seal as well.

Symptoms of a failed 'E' ring include: 

  • Gas leaks emitting foul odors around seams or vents   
  • Reduced heat conductivity hampering dryer functioning
  • Moisture accumulation shortens fabric lifespan  
  •  Drafts compromising indoor air quality and energy bills

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models. 

This part fixes the following symptoms
  • Will not tumble
See more...
Do-It-Yourself Stories from Customers like You Loud squealing noise   William B. • Rocky Mount , NC • December 17, 2018

First replaced the drum rollers...that wasn't it..took dryer back apart and spun the belt tension wheel by hand (should have done this the first time I took the dryer apart) and it squeaked. so I ordered the full parts: wheel, idler arm, idler spring, arm sleeve, E ring..Put it back together and whoa..no more squealing!! Read more

More
$12.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google