Maytag Lsg7804aam Parts

Best Seller

Genuine Whirlpool part

Appliance Fastener Screw

By: Whirlpool

Part Number: WPY014874

Factory fastener screw secures panels, brackets, and trim inside appliances. Replace missing, stripped, or damaged screws to restore tight fit.

Do-It-Yourself Stories from Customers like You Loud squealing noise William B. • Rocky Mount , NC • December 17, 2018

First replaced the drum rollers...that wasn't it..took dryer back apart and spun the belt tension wheel by hand (should have done this the first time I took the dryer apart) and it squeaked. so I ordered the full parts: wheel, idler arm, idler spring, arm sleeve, E ring..Put it back together and whoa..no more squealing!! Read more

$7.56

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Hex Nut

4.9 (20)

By: Whirlpool

Part Number: WP33001443

This Hex Nut is a small but critical fastener used to secure brackets, panels, and internal assemblies in your appliance. Replacing a stripped, corroded, or missing nut restores a tight, rattle-free, and safe installation.

Threads onto a matching bolt or stud to clamp parts together
Helps maintain alignment and reduce vibration-related loosening
Commonly used on panels, brackets, supports, and internal assemblies
Replace when threads are damaged, hex flats are rounded, or hardware is missing
Symptoms can include loose or rattling components or hardware that won't stay tight

What's included: One hex nut. Install notes:

Disconnect power and, if applicable, shut off gas or water before servicing
Use the correct-size nut driver or wrench to avoid rounding the hex
Start the nut by hand to prevent cross-threading; tighten snugly without over-torquing
Inspect and replace any damaged mating bolt/stud or washer for a secure repair

Do-It-Yourself Stories from Customers like You The rollers needed to be replaced, the axles for the rollers needed to be replaced, the tension pulley roller needed to be replaced, the belt needed to be replaced Richard G. • El Paso , TX • December 18, 2018

It took me about 2 hours to take everything apart and get it back together & running again with no problems. All the parts I ordered were exactly what I needed to fix everything. Thank you all !!! Read more

$5.95

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Washer Tub Cover Gasket

4.7 (6)

By: Whirlpool

Part Number: WP22001007

Seals the tub cover to prevent leaks during wash and spin cycles. Replace if water leaks from the top of the tub. Confirm fit with your model number.

Do-It-Yourself Stories from Customers like You Leaking water from washing tub E M. • Danville , KY • May 22, 2016

Replaced mounting stem and tub bearings Read more

$60.52

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Washer Siphon Break Elbow

4.8 (9)

By: Whirlpool

Part Number: WPW10116738

90-degree drain connector that creates an air break in the drain path. Replace if cracked, broken, or leaking to restore proper water drainage.

Do-It-Yourself Stories from Customers like You Syphonbreak was leaking James O. • Bryant , AL • September 04, 2015

We ordered parts from appliance parts pros and I fixed it. Read more

$26.95

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Screw, 1 Piece

4.9 (18)

By: Whirlpool

Part Number: W11233072

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

Fastens panels, brackets, covers, or internal parts to the chassis or frame
Helps maintain alignment and support, reducing rattle, vibration, or looseness
Replaces missing or damaged screws that have backed out, broken, or stripped
Restores secure mounting after service when original hardware is lost

What's included: 1 screw Install notes:

Disconnect power; shut off water or gas supplies before servicing
Use the correct driver; start threads by hand to avoid cross-threading
Match length and thread to the original location; do not substitute with longer hardware
Tighten snugly; do not overtighten into plastic or thin metal

Do-It-Yourself Stories from Customers like You Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

$21.46

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Leveling Leg Pad

5.0 (8)

By: Whirlpool

Part Number: WP210684

The Leveling Leg Pad is an OEM replacement part for Whirlpool washing machines. This small but essential component fits beneath the leveling legs, providing stability and preventing the appliance from moving or vibrating excessively during operation. It also protects flooring surfaces from potential scratches or damage.

Symptoms of a bad Leveling Leg Pad include:

Increased vibration or noise during the wash or spin cycle
The washing machine wobbling or becoming unsteady
Visible wear, cracks, or damage to the pad

Causes of a failing Leveling Leg Pad can include wear and tear from prolonged use, exposure to moisture, or excessive weight causing deformation. Replacing worn pads helps maintain the appliance's balance and efficiency.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

For the leveling leg order 22003428.

This part fixes the following symptoms

Shakes and moves

Do-It-Yourself Stories from Customers like You Washer "bucking" while in spin cycle Luis P. • Loveland , CO • June 27, 2017

New leveler pads Read more

$11.78

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Adjustable Leg

5.0 (5)

By: Whirlpool

Part Number: 22003428

Leg, adjustable (w/nut)

This part fixes the following symptoms

Shakes and moves

Do-It-Yourself Stories from Customers like You Needed new support adjustable legs for my maytag washer Rodger M. • San Clemente , CA • November 17, 2014

Took off the old parts and replaced with the new parts Read more

$16.95

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Washer Agitator Seal Assembly

5.0 (1)

By: Whirlpool

Part Number: WP6-0A57420

Seals the agitator shaft opening to prevent leaks and protect internal components. Replace if you see water leaking from the center post during wash cycles.

Do-It-Yourself Stories from Customers like You Washer would only spin. Byron V. • Bellevue , MI • February 04, 2020

Found the wonderful parts diagrams you most generously share online and a couple of YouTube videos . I determined it should be repairable. In my cast the agitator shaft was frozen (rusted) in place. I was very fortunate to have been able to eventually remove it with the use of a lot of BP penetrating oil and heat. Long and short the replacement parts fit perfectly and the washer is running like new. Special thanks to the online support make my repair possible. Read more

$23.95

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Washer Hose Clamp

5.0 (6)

By: Whirlpool

Part Number: WP3367052

Hose clamp for securing water supply and drain hoses on the washer. Provides leak-free seal at hose connection points.

Do-It-Yourself Stories from Customers like You Fill hose leaking at crimp fitting by faucet connector faucet adapter leaking (whirlpool portable dishwasher) Ralph P. • San Antonio , TX • August 21, 2016

Replace faucet adapter, replace fill and drain hose assembly. You must remove outer cabinet to be able to route new hoses and access hose connections under tub. Read more

$5.95

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Hose Clamp

5.0 (6)

By: Whirlpool

Part Number: WP489503

This hose clamp secures a rubber or plastic hose to its fitting to maintain a tight, leak-resistant seal. Replace a worn or missing clamp to stop drips and keep appliance water connections secure.

Fastens a hose to a barb or port to prevent leaks
Helps keep hoses from slipping off due to vibration or pressure
Restores proper sealing when a clamp is rusted, bent, or stripped
Common symptoms: water dripping at a hose joint, loose hose connection, or a clamp that won't tighten

What's included: 1 hose clamp Install notes:

Disconnect power and shut off the water supply before servicing
Place a towel to catch residual water when removing hoses
Position the clamp just behind the hose barb/bead and secure with the appropriate tool
Restore water and power, then run a quick check for leaks at the connection

This part fixes the following symptoms

Leaking

Do-It-Yourself Stories from Customers like You Leaking bleach tube Mike C. • Willow Grove , PA • May 21, 2017

Replaced the tube and the clamp Read more

$7.49

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Dryer Motor Clip

4.7 (3)

By: Whirlpool

Part Number: WPY015825

This is a metal clip that secures the drive motor in place within the dryer cabinet. It clamps around the motor housing to prevent movement during operation. Replace this clip if it is broken, missing, or bent, which can cause the motor to shift and create excessive vibration, rattling noises, or belt misalignment.

Do-It-Yourself Stories from Customers like You Maytag dryer after 38 years started making loud squealing noises Art W. • Fenton , MO • December 03, 2015

We took the dryer out of the laundry room and took it apart, after reviewing numerous videos at Appliance Parts Pros for direction. Removed front panel, front bulkhead and drum. Then removed exhaust duct, blower assembly and finally motor. (Use large flat blade screw-driver to press very hard down and out on motor mount to remove). After reinstalling all components....motor, new exhaust duct work,front bearings in front bulkhead, and blower assembly, all went back together great. The most... Read more

$14.41

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Washer Lower Water Injector

4.5 (4)

By: Whirlpool

Part Number: WP22001186

Leaking water at the tub ring during fill? This lower water injector channels incoming water into the tub. Simple 30-minute DIY repair with basic tools.

Do-It-Yourself Stories from Customers like You Broken injector Matt M. • Wheat Ridge , CO • June 28, 2019

An easy fix for the most part. I had no idea what I was doing, but glad I bought both upper and lower injectors. Not sure why these are separate parts? Cheap plastic. I did not get the hose clamp because I didn't think I would need it. You probably do, so go ahead and just order it or grab one if you have one laying around. Mine is hooked up without it for now which I'm sure I will regret later but I needed to get our washer running immediately due to a bed bug situation in our house. Read more

$51.62

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Washer Stop Lug

4.3 (3)

By: Whirlpool

Part Number: WP22003555

Washer making noise or controls not stopping correctly? This stop lug limits component movement to prevent over-travel. Simple snap-in repair.

Do-It-Yourself Stories from Customers like You Lip seal was leaking oil which is at the part of the transmission housing shaft. Gary B. • Hamilton , OH • April 07, 2017

I emailed appliancepartspros.com with what my problem was and they informed me what was wrong they gave me a part number to order, tools needed and a brief explanation how replace the seal. they also have online video's for different repairs. I watched the video for lip seal(part # 207843) replacement.I also had to remove the brake assembly in order to replace the seal so I watched that video also. I went online and got the part numbers for items I needed to make my repairs.Just follow the... Read more

$14.50

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Laundry Center Drive Motor

5.0 (3)

By: Whirlpool

Part Number: W10411000

Fix a laundry center that won't spin, agitate, or hums without moving. This drive motor replacement requires moderate skill and 2-3 hours to install.

Do-It-Yourself Stories from Customers like You Dryer motor failed Randall S. • Huntsville , TX • October 03, 2014

I've read several reports about how "easy and quick" it was to replace the motor. All I can say is, "nonsense". It wasn't as easy as others reported, but for someone with decent tool skills, it was a very doable home repair - just be prepared to spend some time on it. First, the motor needs to be accessed from the FRONT of the dryer. This means removing the two cover panels to access the interior. NOTE: take photos as you go of how all interior pieces for together to make reassembly easier -... Read more

$200.56

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Washer Inlet Hose Gasket

5.0 (3)

By: Whirlpool

Part Number: WPY013783

This is a rubber gasket that sits inside the water inlet hose connection on your washing machine. It creates a watertight seal between the hose fitting and the water supply valve to prevent leaks. Replace this gasket if you notice water dripping from the hose connections at the back of the washer.

This part fixes the following symptoms

Leaking

Do-It-Yourself Stories from Customers like You Pretty much everything Charlotteanne Y. • Kingston , IL • August 06, 2018

Here's the story. All my appliances except the dryer broke. Yeah. talk about bad luck. First I tried to fix the refrigerator. Replaced both motherboard and inverter board. Now it wakes up but the compressor does not kick in. Need another part. The washer, well I have to pull out the sink to get enough room to pull out the washer to fix it. Since the refriigerator is still in the middle of the kitchen, I don't need to tear apart another room. Nevertheless, let me say this, I love my "older"... Read more

$6.72

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Laundry Center Mounting Bolt

4.8 (4)

By: Whirlpool

Part Number: W10175939

Mounting bolt secures the tub and internal components in your laundry center. Replace if stripped, rusted, or missing to restore stable assembly fit.

Do-It-Yourself Stories from Customers like You Washer was leaking water from the tub seal area. David D. • San Diego , CA • October 11, 2020

Purchased and installed new tub bearing and seals. Decided to replace the tub bolts as well, since I had it apart. Now if I could just find a new outer tub (which the manufacturer has discontinued). Appliance parts pros has a great "how to" video which made it simple! Read more

$2.20

IN STOCK

Ships Monday Guaranteed

Add to Cart

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Maytag Lsg7804aam Parts

Appliance Fastener Screw

Hex Nut

Washer Tub Cover Gasket

Washer Siphon Break Elbow

Screw, 1 Piece

Leveling Leg Pad

Adjustable Leg

Washer Agitator Seal Assembly

Washer Hose Clamp

Hose Clamp

Dryer Motor Clip

Washer Lower Water Injector

Washer Stop Lug

Laundry Center Drive Motor

Washer Inlet Hose Gasket

Laundry Center Mounting Bolt