Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice maker stopped working or not making ice? This complete ice maker assembly restores production. DIY install in 20-30 minutes with basic tools.
I replaced the ice maker after replacing the ice try and before that the ice chute gasket. All easy fixes. However, I am still seeing some frost build-up leading me to believe that the issue is just a faulty design, which I have read other posts on. Just too much warm air gets in the ice maker because it is located in the refrigerator, plus warm air probably finds its way from the outside dispenser, up the chute into the ice maker. Oh well, nothing the occasional hair dryer won't take care of,... Read more
Ice dispenser jammed or cracked bucket? This ice bucket assembly stores ice and feeds the dispenser. Easy DIY fix in under 10 minutes for most models.
I noticed that the bottom of the plastic bucket was cracked even though it was less than two years old. I called Samsung and they wanted to charge me almost $200. Instead, I found the part at appliance parts pros for half that cost. Since I replaced the ice tray bucket assembly, my ice maker is working perfectly! Read more
Fix ice buildup on evaporator coils or inconsistent cooling with this refrigerator temperature sensor. Easy DIY repair with our video guide.
Poped off plastics caseing inside the frigerator. Unscrewed 4 screws holding black fan inplace. Followed yellow wire to locate white sensor. Need to be careful not to break styrofoam, don't force it, it should seporate from plastic easy as long as the 4 screws are out. Swap it for the new one and button it back up. While I was in there I replaced the defrost sensor and the other sensor next to the heating rod. Also I know there is an issue with drain hole plugging up with ice so I extended the... Read more
Ice maker stopped working or making loud popping sounds? This assembly restores ice production. DIY-friendly repair—just unscrew, unplug, and swap.
Since I could not find the correct thermistor from the schematic provided, I ordered the thermistor harness for the evaporator. I cut the harness and spliced it to the sheared thermistor wires on the roof of the freezer compartment. It now works fine with a little "farmer ingenuity" help. Samsung was absolutely no help at all, but the guy that I spoke with over the phone at APP sure was. This site is now my "go to" for appliance parts! Tip for others with this model. Do not overfill the upper... Read more
If your refrigerator has ice buildup on coils or water under crisper drawers, the defrost thermostat may have failed. DIY-friendly repair part.
Replacement right door bin shelf assembly for refrigerators. Installs on right door for beverage and condiment storage. Replace if cracked or broken.
Slid out old bin and replaced it with the new one. No tools were required. Read more
Removes chlorine, lead, and mercury for clean, fresh-tasting water. Replace every 6 months or when flow decreases. Confirm fit with your model number.
I called your company with the serial number of the fridge, and had the best service locating the exact items i needed. I placed by order . and company called to confirm my order and the method of my payment. Thank you very much Read more
Refrigerator not cooling or ice building up? The evaporator fan motor circulates cold air. Common DIY repair when fridge runs warm or makes noise.
Replaced fan motor, temperature sensor and defrost thermostat. Note: I had to replace connector on new defrost thermostat. Connector on new part did not fit mating connector in refrigerator.. spliced in old connector for new one. Read more
The Refrigerator Auto-Close Lever Assembly is essential for maintaining the seamless operation of your Samsung refrigerator door. This assembly ensures that the refrigerator door closes automatically, enhancing energy efficiency and keeping your food fresh. Crafted as a genuine OEM part, it guarantees a perfect fit and reliable performance for your appliance. Designed specifically for Samsung refrigerators, the Auto-Close Lever Assembly is easy to install, allowing you to restore your refrigeratorGÇÖs functionality without hassle. By replacing a faulty or worn lever, you can prevent unnecessary energy loss and ensure your refrigerator operates smoothly. This genuine OEM part provides durability and precision, meeting the exact specifications of your Samsung refrigerator. Enhance your fridgeGÇÖs performance and enjoy the convenience of an automatically closing door with the Refrigerator Auto-Close Lever Assembly , ensuring your appliance runs efficiently and effectively for years to come.
Repair went great thanks for your service Read more
The Refrigerator Flap Door Hinge is a crucial component for ensuring your Samsung refrigerator operates smoothly and efficiently. Designed specifically for Samsung refrigerator models, this genuine OEM part guarantees a perfect fit and reliable performance. The hinge facilitates seamless opening and closing of the flap door, maintaining proper alignment and preventing any unwanted gaps that could affect your applianceGÇÖs cooling efficiency. Made from durable materials, the Refrigerator Flap Door Hinge is built to withstand regular use, ensuring long-lasting functionality. Installing this hinge is straightforward, allowing you to restore your refrigeratorGÇÖs performance without hassle. By choosing this genuine OEM part, you ensure that your refrigerator continues to operate as intended, preserving the freshness of your stored items and enhancing the overall user experience. Whether your existing hinge is worn out or damaged, the Refrigerator Flap Door Hinge provides a dependable solution to keep your Samsung refrigerator in optimal condition.
I loosened middle hinge by the 2 screws which holds a power cord that clips together, then slid the hinge flap upward to release from the door. My bottom clip hinge was broken away from spring and the only way to attach a new hinge clip was to carefully separate the hinge flap. This can be done by squeezing the flap to see where the separation seams are. Small narrow screwdrivers along with a spatula will do without damaging the plastic. This allowed for acess to the spring which connects to a... Read more
Ice maker stopped working or water line freezing up? This fill tube assembly with built-in heater restores ice production. DIY-friendly repair.
My husband figured that the line to the icemaker was either clogged or had frozen over. We found some posts of people defrosting the icemaker by just leaving the freezer door open or with a hairdryer or space heater, but this seemed to be only a temporary fix so we didn’t do that. Lots of videos out there for Samsung through-the-door top icemaker as, but it was difficult to find any advice for our bottom freezer style (RF261BEAESR). But the parts diagrams on Appliancepartpros are very useful... Read more
The Refrigerator Defrost Heater Metal Sheath is an essential component for maintaining the efficiency of your refrigerator. This genuine OEM part is specifically designed to work seamlessly with Samsung refrigerator models, ensuring a perfect fit and reliable performance. The HEATER METAL SHEATH plays a crucial role in the defrosting process by evenly distributing heat to prevent ice buildup. This helps maintain optimal cooling levels and extends the lifespan of your appliance. Installing the Refrigerator Defrost Heater Metal Sheath can resolve issues related to excessive frost accumulation, leading to better energy efficiency and consistent temperature control. Its durable construction ensures long-lasting functionality, providing you with peace of mind and reducing the need for frequent repairs. Whether you are replacing a faulty heater or upgrading your refrigeratorGÇÖs performance, this genuine OEM part offers a dependable solution to keep your Samsung refrigerator running smoothly. Enhance your refrigerator's performance with the Refrigerator Defrost Heater Metal Sheath and enjoy a more efficient and reliable appliance.
Replaced sensors and heater element. We'll see if that fixes the problem. It usually happens every 3 months. Read more
This is a thermistor-style temperature sensor that monitors the internal temperature of the refrigerator compartment and sends readings to the control board. The control board uses this data to regulate the compressor and defrost cycles. Replace this sensor if the refrigerator is too warm, too cold, runs constantly, or displays error codes related to temperature sensing.
I replaced all three sensors behind the Defroster cover since I was not able to test them. Problem solved. Read more
Seals the ice chute assembly in your refrigerator's dispenser door. Replace if cracked, broken, or missing to prevent frost buildup and air leaks.
Replaced chute gasket and ice bin. Has worked great so far. Fingers crossed. Read more
This is a mounting screw used to secure the door handle to the refrigerator door. It threads into the handle bracket to keep the handle firmly attached. Replace this screw if the door handle feels loose, wobbles, or if the original screw is stripped or missing.
Replaced broken handle support bracket (part #AP5620448) and cap (part #AP5620751). Used a phillips head screwdriver and allen wrench. Pliers also came in very handy. If replacing cap and support bracket, be sure to install cap before support bracket, otherwise you'll have trouble installing the cap. I ended up not needing to replace the fixer handle (part #AP4372038), but I'll keep it around just in case. Read more
The Refrigerator Sensor Cover is an essential component for maintaining the optimal performance of your Samsung refrigerator. This genuine OEM part is designed to protect the sensor, ensuring accurate temperature readings and efficient operation of your appliance. Constructed with high-quality materials, the Sensor Cover provides durability and a perfect fit for a range of Samsung refrigerator models. By safeguarding the sensor from dust, spills, and everyday wear, this cover helps extend the lifespan of your refrigeratorGÇÖs sensitive components. Installing the Refrigerator Sensor Cover is straightforward, allowing you to restore your fridgeGÇÖs functionality quickly and easily. Whether you need to replace a cracked, missing, or damaged cover, this genuine OEM part guarantees reliable performance and compatibility. Enhance your refrigeratorGÇÖs efficiency and maintain a consistent cooling environment with the Refrigerator Sensor Cover , ensuring your food stays fresh and your appliance operates smoothly.
Samsung refrrigerator. it started when the setting was on cubes but was putting out crushed ice. then months later the water refill was running down into the ice bucket causing a massive block of ice in the bucket. look closely at the first two or three cubes in the ice tray after they unload. mine were not dumping and staying in the tray. when the water refill kicked on it would overfill the tray (because of the leftover cubes remaining in the tray) and would run down into the ice bucket... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.