Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Seals the ice chute assembly in your refrigerator's dispenser door. Replace if cracked, broken, or missing to prevent frost buildup and air leaks.
Replaced chute gasket and ice bin. Has worked great so far. Fingers crossed. Read more
Flipper assembly that installs vertically on the French door liner to seal the center gap. Replace if cracked, broken, or no longer closing properly.
Looked at new part and realized there were only 2 screws that held the flap onto the door. Removed 2 caps off of screws with small knife and saved them. Removed 2 screws and the flap fell off into my hands. Disconnected wire harness. Connected wire harness for new flap and carefully pushed harness back into recess in door. Put screws back with caps. Closed the door to test and another wonderful job completed by homeowner! Read more
Replaces cracked or clogged drain cap assembly in refrigerator compartment. Installs behind rear wall to prevent water buildup under crisper drawer.
Found one of the drain valves was clogged causing condensation to overflow on the floor behind the refrigerator. Order the parts on Monday morning and they arrived tuesday afternoon. Replace both of the valves in 15 minutes. Easy repair and save a bundle over a service call. Read more
Ice maker not producing ice or water flow stopped? The fill tube heater prevents freezing in the water line. Moderate DIY repair with video guide.
Turn off the water to the ice maker. Unload the freezer and remove the freezer door so you have room to work. Remove the ice maker by removing 2 screws in the front then pull the unit toward the front and unplug the wiring connection. The pipe will now be exposed. Remove the flexible piece from the front of the pipe that directs the water flow to the ice cube tray. Remove the wire tie on the front of the pipe and peel off the insulation surrounding the pipe. The heater will now be exposed.... Read more
The Evaporator Defrost Heater Bracket for Refrigerator is essential for maintaining your Samsung refrigerator's optimal performance. This genuine OEM part securely holds the evaporator defrost heater in place, ensuring effective defrost cycles that prevent frost buildup. By maintaining proper heater alignment, it helps your refrigerator operate efficiently, reducing energy consumption and extending the appliance's lifespan. Specifically designed for Samsung refrigerator models, this bracket guarantees a perfect fit and seamless integration with your existing system. Installing the Evaporator Defrost Heater Bracket restores the defrost mechanism's reliability, ensuring your fridge stays cool and your food remains fresh. Made from durable materials, this genuine OEM part withstands regular use and provides long-lasting support. Whether you're replacing a worn or damaged bracket, this component is the ideal solution to keep your refrigerator functioning smoothly. Trust in the Evaporator Defrost Heater Bracket for Refrigerator to deliver consistent performance and enhance your appliance's defrosting capabilities.
Replaced sensors and heater element. We'll see if that fixes the problem. It usually happens every 3 months. Read more
Fix warm fridge temps and ice buildup with this evaporator fan motor. Common when fan makes grinding noise or stops running. DIY repair in 2-3 hours.
I took all the items out of the refrigerator. Removed the screws that hold the cover over the evaporator motor. Than for three hours used a hair drier to remove ice. The panel was frozen on if you pull on it it will break. Soaked up all the water removed the panel and took the fan blade off. That was difficult because it looks like a regular screw head however, you need to push in that which will cause it to release the blades and than push it onto the new motor. Than replace the panel put the... Read more
The Refrigerator Temperature Sensor Bracket is an essential component for maintaining optimal performance in your Samsung refrigerator. This genuine OEM part ensures precise temperature monitoring, which is crucial for keeping your food fresh and your appliance running efficiently. Designed specifically for Samsung refrigerators, the sensor bracket provides a secure and stable mounting point for the temperature sensor, enhancing its accuracy and reliability. By replacing a worn or damaged sensor bracket with this high-quality genuine OEM part, you can prevent temperature fluctuations and avoid potential cooling issues. Installation is straightforward, allowing you to restore your refrigerator's functionality quickly and easily. Investing in the Refrigerator Temperature Sensor Bracket means trusting in a durable and compatible solution that supports the longevity and efficiency of your Samsung appliance. Experience the peace of mind that comes with using a part designed to meet the exact specifications of your refrigerator, ensuring consistent performance and a better overall cooling experience.
Samsung refrrigerator. it started when the setting was on cubes but was putting out crushed ice. then months later the water refill was running down into the ice bucket causing a massive block of ice in the bucket. look closely at the first two or three cubes in the ice tray after they unload. mine were not dumping and staying in the tray. when the water refill kicked on it would overfill the tray (because of the leftover cubes remaining in the tray) and would run down into the ice bucket... Read more
Fix ice or water that won't stop dispensing with this dispenser control switch. Resolves stuck dispenser issues. DIY repair in under 30 minutes.
First, I modified old butter knife by bending a 90° angle about 3/4" from the tip. I slid the bent in up under the bottom of the switch cover and worked it to one side. I then rotated the knife downward using the bent end to pry the cover off. The switch is held by plastic arms on each side. The bottom right arm has a locating pin that fits into the switch. Unplugged the switch and re-installed. Read more
Ice buildup on evaporator coils blocking airflow? This defrost heater melts frost during cycles. Moderate DIY repair—allow overnight thaw time first.
I replaced the temperature sensor, the thermo fuse, and the heating element that thaws the evaporator on a cycle to keep the evaporator from freezing up. The most time consuming part of the repair was waiting for the fridge to thaw out so that I could remove the cover. I disconnected the fridge the night before and placed a fan on low with the doors open so that it was thawed out when I awoke. It was easy to remove the evaporator cover once I removed all of the shelves. I took pics as i was... Read more
Replacement rear caster wheel for refrigerators. Restores mobility when original wheel is broken, cracked, or damaged. Mounts to bottom rear of unit.
I have a large Samsung 4 door refrigerator. One of the rear wheels broke. To replace it, you need the wheel and the shaft. To lift the refrigerator for the repair, I had my wife stand in front of it with her foot on a board that was wedged against the front wheels. I then pushed the refrigerator up from behind and slid a 3/4" piece of plywood underneath the bottom with my foot. This gives you enough space to do the repair. After removing the back cover, it's best just to knock out the broken... Read more
Plastic grommet that cushions the hinge pin on refrigerator doors. Replace if cracked, worn, missing, or causing door alignment issues.
I removed the door and the hinge assembly from the right side; it turns out the grommet had never been installed and this is what was causing the door to grind down the metal hinge. It was remarkably easy to replace and my door is working perfectly! Read more
Replacement axle pin that secures roller wheels to the refrigerator base. Needed when original pin is damaged, corroded, or broken during wheel replacement.
Samsung does not make it easy to replace the casters. The shafts holding the casters are crimped at the ends and had to be cut off with little room for any tools. I had to jack up the fridge and I used a hacksaw blade with a handle to cut through the wheel shafts. I didn't want to use a reciprocating saw. I couldn't find a way to crimp the new shafts so I drilled small holes at the ends and used cotter pins to retain the shafts in place.The rear caster had no room to slide the new one in... Read more
Connects your refrigerator to the wall outlet. Replace if the cord is severed, the plug prongs are broken, or the ground terminal is damaged or missing.
I started by replacing the water filter assembly since it was leaking after I attempted to install a non-name-brand filter. The new assembly didn't fix the problem (but was hard to find, and AppliancePartsPros was amazing in being able to get one). Further, while replacing that I noticed that the previous owner had literally cut out the grounding pin from the power cord. I decided to replace the power cord and the Ice Maker Assembly. None of the online stores seemed to have either part listed... Read more
Houses and secures your water filter for clean drinking water and ice. Replace if cracked, leaking, or causing slow flow. Confirm fit with your model number.
New filters did not fix issue and lines were clear. No need to pull fridge out, Changing this part fixed completely and took about an hour. Mostly because I did not find a good step by step to follow. FIRST: Shut off water, but leave power on for inside fridge lighting. 1. Remove two crisper drawers 2. Squeeze two white tabs just under glass shelf in middle filter housing while pulling off front filter cover (has big hole for filter in middle of it). This requires slotted screwdriver to LIGHTLY... Read more
The Refrigerator Fresh Food Evaporator Cover Assembly is essential for maintaining the optimal performance of your Samsung refrigerator. This genuine OEM part is designed to replace a worn or damaged evaporator cover, ensuring your appliance continues to operate efficiently. Crafted with high-quality materials, the cover assembly provides robust protection for the evaporator, helping to regulate temperature and maintain consistent cooling in the fresh food compartment. Installing the Refrigerator Fresh Food Evaporator Cover Assembly is straightforward, allowing you to restore your refrigeratorGÇÖs functionality without hassle. This part is specifically compatible with a wide range of Samsung refrigerator models, guaranteeing a perfect fit and seamless integration with your appliance. By choosing this genuine OEM part, you ensure reliable performance and longevity, protecting your investment in a Samsung refrigerator. Enhancing the efficiency of your fridge, the Fresh Food Evaporator Cover helps prevent frost buildup and maintains the proper airflow, contributing to a fresher environment for your groceries. Whether you are replacing a cracked, missing, or damaged cover, this assembly is the ideal solution to keep your refrigerator running smoothly and your food fresh.
Replaced the evaporator cover. Read more
Fix a refrigerator that won't cool or runs warm. This condenser fan motor assembly replaces failed motors causing cooling problems. DIY-friendly repair.
Replaced the condenser fan. Read more