Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Spring component that provides tension for the freezer door handle mechanism. Replace if spring is broken, missing, or no longer holding proper tension.
I looked at the blow up drawing to figure out what parts I might need. I then watched a you tube video to see how to take the handle off. I kind of figured out on my own how to remove the ruined cap handle. It took me a few minutes to figure it out and more time to remove both the handle and the broken part. Turns out I did not need the spring nor the shaft cap handle. Very proud of myself. Saved a huge amount of money. Only problem was that I could only put in one screw as the previous... Read more
Replaces cracked, frozen, or leaking water reservoir in bottom-mount refrigerators. Installs behind crisper drawers. Includes dual tanks and connector.
Ordered tank and heater, installed, so far so good. Thanks for the speedy order Roman Read more
Fix water pooling under crisper drawers. This evaporator shield with drain pan stops leaks caused by corrosion. Moderate DIY repair with video guide.
Repair required removing all of the interior drawers & shelves and the interior back panel. There you will find the defrost heater. Behind the defrost heater is a metal plate as well as one on the back of the front interior cover. Both were corroded and in need of replacement. I ordered Samsung part #’s AP5577767, plate drain & AP5587916, evaporator plate and replaced both. Read more
Center cap covers the middle hinge on French door refrigerator mullions. Replaces broken, cracked, or missing caps for a clean finished look.
In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps... Read more
Replacement rail assembly for refrigerator vegetable drawers. Installs on the side wall to support drawer gliding. Needed when original is cracked or broken.
Removed the bottom shelf by releasing the 2 clips near the water filter, then lifted the front of the shelf and slid it out. Removed 2 screws from the broken Vegetable Rail and replaced it with the new one. Slid the shelf back into place and locked it down into the clips. Done. Took longer to remove everything from the shelf than it did to fix it. Less than 5 minute repair. Read more
Fix frozen water tanks and no water from door dispenser. This heater prevents ice buildup in storage tanks. DIY-friendly repair with video guide.
Maintains an airtight seal to keep cold air inside your refrigerator. Replace if you notice frost buildup, warm spots, or condensation. Confirm fit with your model number before ordering.
Found AppliancePartsPros.com by googling my model # (RF26XAEBP/XAA) and problem. Was hesitant, but ordered the gasket and not only did it arrive in a couple days, it was the right part, and super easy to install. I used the manual to figure out how to get the freezer drawer and basket out and then realized there were four bolts holding the door on that needed to come out. It was super easy to do with someone helping to hold things level for install and removal. Pull the old seal out, and... Read more
Replacement vegetable drawer rail assembly for bottom-mount refrigerators. Installs in the crisper compartment to support produce drawers. Needed when broken or snapped.
I removed the broken rail saving the 2 Phillips head screws for installation of new drawer rail. Removal of the shelf above the drawers was required and was accomplished by pushing a button on the front of the shelf support. The installation was a snap and took about 10 minutes after removal of food items. The part was the correct one as verified by the model number on the inside of the refrigerator door. Thanks AppliancePartsPros.com! Read more
The Refrigerator Screw-Tapping is an essential component for maintaining your Samsung refrigerator's functionality. This genuine OEM part ensures precise threading, allowing screws to be securely fastened without damaging the surrounding materials. Designed specifically for Samsung refrigerators, it guarantees a perfect fit and reliable performance. Whether you are replacing a damaged screw-tapping or performing a repair, this Refrigerator Screw-Tapping simplifies the process, saving you time and effort. Its high-quality construction provides durability and long-lasting support for your appliance. By choosing the Refrigerator Screw-Tapping , you ensure your refrigerator remains sturdy and functional, enhancing its overall lifespan. This genuine OEM part is easy to install and seamlessly integrates with your existing setup, making it an ideal choice for DIY repairs. Trust in the quality and compatibility of this Samsung part to keep your refrigerator operating smoothly and efficiently.
The start button had been tricky to use. You had to push it in just a certain way to get the dryer to start. Eventually it was non-responsive. All other controls worked and there was no error code displayed. The repair was to replace the whole control board which cost around $100. Heavy sigh.. Be sure to keep track of all your screws. BTW it was not the thermal fuse. All the online videos say this is the first thing to look for when the dryer will not start. Be sure to check with the person... Read more
Creates an airtight seal to maintain proper temperature and keep food fresh. Replace if torn, leaking air, or not sealing properly. Confirm fit with model.
Ordered replacement gasket. Old one was removed bybgrabbing a corner and pulling. It is a simple push in gasket. No disassembly of the door required. No tools other than my fingers needed it install the new gasket. Quick and easy. Read more
Covers the heater assembly on French door refrigerators. Replace if the hinged cover is cracked, broken, or missing. Installs on the center mullion.
Removed broken piece, installed new piece. Read more
Ensures clean, fresh-tasting water and ice. Replace every 6 months or when flow decreases. Confirm fit with your model number before ordering.
Put the right Samsung filter in the fridge. Read more
The Refrigerator Flapper Door Hinge Cover is designed to restore the functionality and appearance of your Samsung refrigerator. This genuine OEM part ensures a precise fit, seamlessly integrating with your applianceGÇÖs door hinge system. Crafted from durable materials, it provides reliable protection against daily wear and tear, extending the lifespan of your refrigerator. Installing the Flapper Door Hinge Cover is straightforward, allowing you to replace a damaged or missing component without the need for professional assistance. This cover not only enhances the aesthetic of your refrigerator but also maintains the smooth operation of the door, preventing issues such as wobbling or misalignment. Compatible with a wide range of Samsung refrigerator models, this genuine OEM part guarantees optimal performance and durability. By choosing the Refrigerator Flapper Door Hinge Cover , you ensure that your appliance functions efficiently and looks its best. Whether you are addressing a broken hinge cover or simply upgrading your refrigeratorGÇÖs components, this part offers a dependable solution to keep your kitchen running smoothly.
I replaced the spring and door heater cover. The video was a life saver on what was needed and how to also the customer Representative was very knowledgeable and sent a video like with my conformation. Read more
The Refrigerator Door Switch is an essential component designed to maintain the optimal performance of your Samsung refrigerator. This genuine OEM part features a reliable switch reed mechanism that accurately detects when the refrigerator door is opened or closed. By ensuring the door is properly sealed, it helps regulate the internal temperature, keeping your food fresh and your appliance running efficiently. The Refrigerator Door Switch is compatible with a wide range of Samsung refrigerator models, making it a versatile choice for your repair needs. Installing this switch is straightforward, allowing you to quickly restore your refrigerator's functionality without hassle. Whether your current switch is malfunctioning, causing the door light to stay on, or affecting the cooling performance, the Refrigerator Door Switch provides a dependable solution. Trust in this genuine OEM part to deliver consistent performance and extend the lifespan of your refrigerator, ensuring a reliable and efficient kitchen appliance for years to come.
I called ApplianceParts Pros and 'chatted' with Robin, described the cover and reed sensor and she found the parts for me. The parts were promptly shipped and arrived when promised. The parts were what I needed and twenty minutes later the refrigerator was fully operational! Thanks ApplianceParts Pro for a great shopping experience. Read more
Ice buildup on refrigerator back wall? A faulty defrost heater sheath may be the cause. This repair typically takes 45 minutes with proper defrosting.
Completely defrosted the refrigerator ,took 2days then replaced temp sensor and heater the repair took about 45 minutes so far everything is working fine Read more
The Refrigerator Door Handle Shaft is essential for maintaining the functionality of your Samsung refrigerator. This genuine OEM part ensures a perfect fit and smooth operation, matching the original quality of your appliance. Crafted with durable materials, the door handle shaft provides reliable support for opening and closing your fridge door effortlessly. Its precise design minimizes wear and tear, extending the lifespan of your refrigerator's handle mechanism. Installing the Refrigerator Door Handle Shaft is straightforward, allowing you to restore your fridge's appearance and usability quickly. Compatible with various Samsung refrigerator models, this genuine OEM part guarantees seamless integration and dependable performance. Whether your current handle shaft is broken, loose, or missing, this replacement part offers a practical solution to keep your refrigerator functioning optimally. Enhance your kitchen's efficiency and ensure a secure, functional handle with the Refrigerator Door Handle Shaft .
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.