Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix warm fridge temps and ice buildup with this evaporator fan motor. Common when fan makes grinding noise or stops running. DIY repair in 2-3 hours.
I took all the items out of the refrigerator. Removed the screws that hold the cover over the evaporator motor. Than for three hours used a hair drier to remove ice. The panel was frozen on if you pull on it it will break. Soaked up all the water removed the panel and took the fan blade off. That was difficult because it looks like a regular screw head however, you need to push in that which will cause it to release the blades and than push it onto the new motor. Than replace the panel put the... Read more
Fix ice buildup behind the refrigerator back panel and restore proper airflow. Includes fan, sensor, and insulation. Moderate DIY repair, 1-2 hours.
I found several posting regarding this problem for my Samsung refrigerator model which were very helpful. I could probably have just defrosted the refrigerator to see if the fan would restart but I also had a long term fix I wanted to try (see below) which I would need to remove the cover to do anyway. I also could have only purchased a new fan (in case it was burnt out from being stuck with ice) but I know my limited skills/patience when it comes to things like this and figured I'd just buy... Read more
Replace your cracked, broken, or missing freezer drawer handle. This plastic handle installs on the pull-out freezer drawer for easy opening and closing.
Using the website, I was able to locate the part and order it Read more
Fixes cracked or leaking ice bucket causing melted ice. Direct replacement for the ice tray assembly. Easy DIY install in under 5 minutes with 2 screws.
Our ice bucket was leaking as it was cracked and the ice was melting. So I ordered and replaced the ice bucket assembly. The item was shipped with blazing speed which really helped. Thank you! Read more
Fix ice or water that won't stop dispensing with this dispenser control switch. Resolves stuck dispenser issues. DIY repair in under 30 minutes.
First, I modified old butter knife by bending a 90° angle about 3/4" from the tip. I slid the bent in up under the bottom of the switch cover and worked it to one side. I then rotated the knife downward using the bent end to pry the cover off. The switch is held by plastic arms on each side. The bottom right arm has a locating pin that fits into the switch. Unplugged the switch and re-installed. Read more
Replacement rear caster wheel for refrigerators. Restores mobility when original wheel is broken, cracked, or damaged. Mounts to bottom rear of unit.
I have a large Samsung 4 door refrigerator. One of the rear wheels broke. To replace it, you need the wheel and the shaft. To lift the refrigerator for the repair, I had my wife stand in front of it with her foot on a board that was wedged against the front wheels. I then pushed the refrigerator up from behind and slid a 3/4" piece of plywood underneath the bottom with my foot. This gives you enough space to do the repair. After removing the back cover, it's best just to knock out the broken... Read more
Ice maker not working or door not closing properly? This refrigerator door interlock switch detects door position to control ice production. DIY-friendly fix.
Replacement door shelf guard assembly for refrigerator doors. Installs on door bin to hold items securely. Needed when original is cracked or broken.
I watched the videos and bought the parts I needed then replaced them Read more
Replacement cap for French door refrigerator center hinge assembly. Covers hinge mechanism on door frame. Needed when original is cracked or broken.
In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps... Read more
Connects your refrigerator to the wall outlet. Replace if the cord is severed, the plug prongs are broken, or the ground terminal is damaged or missing.
I started by replacing the water filter assembly since it was leaking after I attempted to install a non-name-brand filter. The new assembly didn't fix the problem (but was hard to find, and AppliancePartsPros was amazing in being able to get one). Further, while replacing that I noticed that the previous owner had literally cut out the grounding pin from the power cord. I decided to replace the power cord and the Ice Maker Assembly. None of the online stores seemed to have either part listed... Read more
Replacement axle pin that secures roller wheels to the refrigerator base. Needed when original pin is damaged, corroded, or broken during wheel replacement.
Samsung does not make it easy to replace the casters. The shafts holding the casters are crimped at the ends and had to be cut off with little room for any tools. I had to jack up the fridge and I used a hacksaw blade with a handle to cut through the wheel shafts. I didn't want to use a reciprocating saw. I couldn't find a way to crimp the new shafts so I drilled small holes at the ends and used cotter pins to retain the shafts in place.The rear caster had no room to slide the new one in... Read more
Replaces broken or loose French door flipper assembly on refrigerators. Installs at top of left door to ensure proper closure and seal between doors.
Purchased modular unit. Installed and functional in about 15 minutes. Read more
Front caster wheel for refrigerators. Installs at the base to allow smooth rolling and repositioning. Replace if wheel is cracked, broken, or won't roll.
Used the video with the parts and replaced the wheels. The only thing we did wrong was using the front wheel axle instead of the back wheel axle on the back wheels. I will just order two more front wheel axles which are longer than the back axle. Thank you for the video, it made this repair easier. Read more
Replace your worn refrigerator door gasket to restore the airtight seal and prevent cold air loss. Fixes torn or damaged seals. Confirm fit by model number.
Replaced the gasket. It really didn't take more than 5 minutes to remove and replace. Read more
Fix a refrigerator that won't cool or runs warm. This condenser fan motor assembly replaces failed motors causing cooling problems. DIY-friendly repair.
Replaced the condenser fan. Read more
Secures refrigerator door handle to the door panel. Replace if plate is cracked, stripped threads prevent handle attachment, or handle loosens repeatedly.
Replaced cap handle. Repair took less than 5 minutes. Read more