Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix water pooling under crisper drawers. This evaporator shield with drain pan stops leaks caused by corrosion. Moderate DIY repair with video guide.
Repair required removing all of the interior drawers & shelves and the interior back panel. There you will find the defrost heater. Behind the defrost heater is a metal plate as well as one on the back of the front interior cover. Both were corroded and in need of replacement. I ordered Samsung part #’s AP5577767, plate drain & AP5587916, evaporator plate and replaced both. Read more
Center cap covers the middle hinge on French door refrigerator mullions. Replaces broken, cracked, or missing caps for a clean finished look.
In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps... Read more
Replacement rail assembly for refrigerator vegetable drawers. Installs on the side wall to support drawer gliding. Needed when original is cracked or broken.
Removed the bottom shelf by releasing the 2 clips near the water filter, then lifted the front of the shelf and slid it out. Removed 2 screws from the broken Vegetable Rail and replaced it with the new one. Slid the shelf back into place and locked it down into the clips. Done. Took longer to remove everything from the shelf than it did to fix it. Less than 5 minute repair. Read more
Replacement vegetable drawer assembly for your refrigerator's crisper compartment. Needed when the original drawer is cracked, broken, or damaged.
Ordered new drawer which the picture made the face of the drawer appear gray. Called an operator she said it appears all drawers are fac tory gray face border. Ordered two day shipping and was pleasantly surprised when drawer arrived on time with white face border and matched original happy happy happy. Read more
The Refrigerator Dispenser Cover Assembly is designed to seamlessly replace your existing dispenser cover, ensuring your Samsung refrigerator maintains its sleek appearance and functionality. This genuine OEM part is crafted with high-quality materials, providing durability and a perfect fit for a range of Samsung refrigerator models. Installing this cover assembly not only restores the original look of your appliance but also protects the dispenser area from spills and debris, making maintenance easier. The easy installation process allows you to quickly upgrade your refrigerator without the need for professional assistance. By choosing the Refrigerator Dispenser Cover Assembly, you ensure compatibility and reliability, enhancing the overall user experience of your Samsung refrigerator. Whether your original cover is cracked, damaged, or missing, this genuine OEM part offers a dependable solution to keep your refrigerator looking and working like new. Trust in the quality and precision of this replacement part to deliver long-lasting performance and maintain the efficiency of your appliance.
Simply removed one screw pulled dispenser control panel straight forward disengaged electrical connection and reassembled. Literally was a 3 minute job. Read more
Houses water filter and valves for clean water and ice. Replace if cracked, leaking, or valves fail. Includes hoses and connectors. Verify fit by model.
After troubleshooting the system changing the filter, checking the lower ice tray and resetting the lower ice maker, I came to the conclusion that the ice maker was not getting water. I ordered the DA97-11435A Filter Assembly. Unit arrived in less than a week. There are no instructions, so you're on your own to figure out how this thing comes out. I was surprised at how large this assembly was. Located the old assembly between the drawers. Removed the drawers and the glass shelf to expose... Read more
Fix fluctuating temperatures or food freezing in your refrigerator with a new pantry temperature sensor. Common fix for uneven cooling issues.
Replaced sensors and heater element. We'll see if that fixes the problem. It usually happens every 3 months. Read more
Replacement vegetable drawer rail assembly for bottom-mount refrigerators. Installs in the crisper compartment to support produce drawers. Needed when broken or snapped.
I removed the broken rail saving the 2 Phillips head screws for installation of new drawer rail. Removal of the shelf above the drawers was required and was accomplished by pushing a button on the front of the shelf support. The installation was a snap and took about 10 minutes after removal of food items. The part was the correct one as verified by the model number on the inside of the refrigerator door. Thanks AppliancePartsPros.com! Read more
The Refrigerator Screw-Tapping is an essential component for maintaining your Samsung refrigerator's functionality. This genuine OEM part ensures precise threading, allowing screws to be securely fastened without damaging the surrounding materials. Designed specifically for Samsung refrigerators, it guarantees a perfect fit and reliable performance. Whether you are replacing a damaged screw-tapping or performing a repair, this Refrigerator Screw-Tapping simplifies the process, saving you time and effort. Its high-quality construction provides durability and long-lasting support for your appliance. By choosing the Refrigerator Screw-Tapping , you ensure your refrigerator remains sturdy and functional, enhancing its overall lifespan. This genuine OEM part is easy to install and seamlessly integrates with your existing setup, making it an ideal choice for DIY repairs. Trust in the quality and compatibility of this Samsung part to keep your refrigerator operating smoothly and efficiently.
The start button had been tricky to use. You had to push it in just a certain way to get the dryer to start. Eventually it was non-responsive. All other controls worked and there was no error code displayed. The repair was to replace the whole control board which cost around $100. Heavy sigh.. Be sure to keep track of all your screws. BTW it was not the thermal fuse. All the online videos say this is the first thing to look for when the dryer will not start. Be sure to check with the person... Read more
Fix a broken ice dispenser lever with this dispenser lever spring. Tricky to install—tape in place before reassembling. Moderate DIY difficulty.
Ordered replacement & used on line videos for guidance Read more
Missing or lost your dispenser drip tray? This replacement tray catches drips and spills from your refrigerator's water dispenser. Easy DIY installation.
This had been going on for several years. Thought it was due to switching to non-Samsung filters as it was very hit and miss whether I could get the dispenser working well after a filter change. Dispenser worked great if I removed the filter. It finally got bad enough that it was obvious the filter was not the issue. This turned out to be a pretty easy part replacement. The water filter and tank assembly is held in place by the shelf above and a T shaped tab below. It just slides forward... Read more
Ice not dispensing or weak flow? This dispenser door assembly restores proper ice chute function. Moderate DIY repair with basic tools in 30-45 minutes.
Removed Phillips head screw from bottom side. Next I removed front electronic interface panel, carefully. The plastic clips holding it in place are designed to pop lose on the right side first.then unplug wiring from back of interface panel. Remove two Phillips head screws holding ice/water dispensing unit in place. Carefully remove dispensing unit from leaving multiple wiring plugs connected. Carefully apply pressure to the side of the ice chute door frame to remove the ice chute door/flap.... Read more
Replace your cracked or broken refrigerator door shelf guard assembly. This bin slides onto the door to hold condiments and small items securely in place.
I ordered 3 replacement shelves for my fridge. Promptly received the shipment, but one of the items was damaged (the lid for the butter try shelf). I went online and started a chat with the rep from APP, and they were great. Gave them my information and told them the issue. Replacement part sent out on Monday! Great service. Read more
The Refrigerator Door Flapper Guide is an essential component designed to ensure the smooth operation of your Samsung refrigerator door. This genuine OEM part helps maintain the proper alignment and movement of the door flapper, preventing unnecessary wear and tear. Crafted with high-quality materials, the flapper guide provides durability and long-lasting performance, ensuring your refrigerator door opens and closes seamlessly every time. Installing this part can enhance the overall efficiency of your appliance, reducing energy consumption by maintaining a consistent seal. It is specifically compatible with a variety of Samsung refrigerator models, guaranteeing a perfect fit and easy installation process. By replacing a worn or damaged flapper guide with this genuine OEM part, you can restore your refrigerator's functionality and extend its lifespan. Customers will appreciate the reliable performance and the peace of mind that comes with using a part designed to meet Samsung's exacting standards. Upgrade your refrigerator today with the Refrigerator Door Flapper Guide and enjoy improved performance and longevity.
New flap housing with a new spring and the new replaceable guide. I didn't know the screw to hold the guide to the housing and forgot to add the spring bushing to my cart during checkout. It was pretty simple, only reason I didn't give it an easy rating is because having to pop off the hinge caps was making me think I was going to snap some of the cheap plastic, kinda have to be careful Read more
Replace your cracked or drooping refrigerator folding shelf insert. This assembly installs in the fresh food section, restoring shelf support and storage.
The circulating fan stopped. Fairly easy to fix, but only after watching Appliancepartspros video. Had to let frig. set for a day to thaw out. Time to fix obviously does not include thaw time or waiting for parts to arrive from Appliancepartspros. Fortunately, I had a backup frig. in the garage. Read more
The Refrigerator Door Switch is an essential component designed to maintain the optimal performance of your Samsung refrigerator. This genuine OEM part features a reliable switch reed mechanism that accurately detects when the refrigerator door is opened or closed. By ensuring the door is properly sealed, it helps regulate the internal temperature, keeping your food fresh and your appliance running efficiently. The Refrigerator Door Switch is compatible with a wide range of Samsung refrigerator models, making it a versatile choice for your repair needs. Installing this switch is straightforward, allowing you to quickly restore your refrigerator's functionality without hassle. Whether your current switch is malfunctioning, causing the door light to stay on, or affecting the cooling performance, the Refrigerator Door Switch provides a dependable solution. Trust in this genuine OEM part to deliver consistent performance and extend the lifespan of your refrigerator, ensuring a reliable and efficient kitchen appliance for years to come.
Replaced the reed switch Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.