Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Six-screw kit for securing the inner door assembly in your dishwasher. Replace missing, stripped, or lost screws to properly fasten door panels.
Repair estimate was $250 parts, $250 labor to change out the circulating pump. I decided to do it myself. Pump was $166 from AppliancePartsPros. It arrived in 4 days. I looked at the video on their website, followed the instructions step by step and did it myself. They estimated 45 minutes. It took 2 hours.There are always minor differences so always take photos of yours. Suggest that you bag up all screws and pieces from each part as you take them off and label the bag. I had 12 bags with 2 to... Read more
Fix a detergent dispenser door that won't stay closed or pops open during the wash cycle. This lid replacement is a simple DIY repair with no tools needed.
After having seen the video I installed the new lid and it worked. Read more
Prevents water leaks by creating an airtight seal around your dishwasher door. Replace if you notice leaking, warping, or tears. Confirm fit with your model.
Purchased seals from appliance parts pros and watched videos to replace. The website and videos made the install a breeze. I am a huge fan of your website and videos. I have used them for years to fix all sorts of home appliances. Read more
The Middle Spray Arm is an OEM replacement part for Bosch dishwashers. It is a rotating component located in the lower dishwasher rack that assists in evenly distributing water across dishes during the wash cycle.
Symptoms of a bad spray arm include:
Causes of spray arm failure can be worn out or damaged arm brackets preventing proper rotation, cracks in the arm itself inhibiting water coverage, or mineral buildup inhibiting 360-degree rotation.
This OEM Bosch replacement part is also compatible with some Thermador, Gaggenau, and Kenmore dishwashers.
Simple snap in replacement. Read more
Fix a dishwasher that won't fill with water or leaks during filling. This water inlet valve controls water flow into your dishwasher. DIY repair.
My husband replaced the inlet valve and it no longer leaks! Read more
The 4 x 16 Screw is an OEM component for Bosch dishwashers.
Common causes of faulty screws include standard wear from years of housing vibrations during wash cycles. Mineral deposits lingering around screw heads also risk eventual corrosion and seizing issues.
Symptoms of potentially loose or damaged screws comprise:
This screw type is additionally suited for Thermador, Gaggenau as well as some premium Kenmore dishwashers.
Ordered replacement parts from AP diagram Read more
Replace your dishwasher's upper dishrack assembly if the coating has rusted, cracked, or chipped. Includes wheels and tines. Installs in the top position.
We ordered new top & bottom trays. The dishwasher is 5 years old, so we needed to decide put cost of new trays or replace unit. We are trying to be "green" and not throw away people. So we shopped the internet. We are so glad and happy that we found AppliancePartsPros. The price was good but the service and speed of us getting the parts was exceptional. Can't say enough from the helpful and knowledgeable agent to the speedy shipping. Will use again next time parts are needed. Read more
Dishwasher won't start or door won't latch? This door lock assembly with microswitch fixes startup issues. Moderate DIY repair, 15-30 minutes install.
REPLACED DOOR LATCH AND DOOR LATCH ASSEMBLY. EVERYTHING WORKS AGAIN. Read more
The Turbidity Sensor is an OEM part for Bosch dishwashers. It is a component located inside the dishwasher that plays a key role in monitoring water quality during each wash cycle. The turbidity sensor detects small food particles and residue in the water, relaying this information to adjust water temperatures, spray pressures, and cycle times accordingly to achieve optimal cleaning results. Causes of failure could be normal wear and tear over time, mineral buildup affecting the sensor's ability to read water quality accurately, or damage from electrical faults. Symptoms of a bad turbidity sensor include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Ordered and replaced sump pump, backflow preventer valve and turbidity sensor on Bosch dishwasher. The latter two parts were recommended when ordering the sump pump and did need replacing. The videos showing how to remove and replace each part are great. The project went well and the dishwasher is fixed for less than 1/4 of what it would cost to get a repairman out here. In all fairness we do live in a remote location and do not have any local appliance repairmen. This is the third project I... Read more
Dishwasher won't fill or keeps overfilling? The float switch detects water levels for proper filling and draining. Accessible repair in under 30 minutes.
I checked continuity at the float switch since I knew the inlet valve was working when direct wired to 120v. Switch did not have continuity. Replaced switch and inlet valve worked at start of cycle. Read more
Replace your cracked, ruptured, or leaking dishwasher drain hose. Connects the tub to your home's drain line. Common damage from overtightening or age.
Once the problem had been identified, I ordered a new drain hose from Appliance Part Pros. I received exactly the part I needed, and it was easy to replace the damaged hose with the new one. Read more
Protective cover panel for the bottom front of your dishwasher. Replaces cracked, bent, missing, or discolored kickplates to restore appearance.
The How-to videos on YouTube from appliance parts pros are very easy to follow. Read more
Interior side trim strip for dishwashers. Lines the sides of the tub for a finished look. Replace if cracked, bent, folded, or missing. Easy DIY install.
One of the side trim strips was folded over on itself, which made latching the door difficult. It was an easy fix: used a Torx screwdriver to remove 2 screws on each side, and just replaced it on each side. I also ordered the door gasket and the trim strip at top of the door, while I was at it. Glad I replaced the door gasket: it was wearing down and very, very dirty! Very quick repair. Also, the shipping was incredibly fast, ordered it over a weekend and arrived Monday or Tuesday, very... Read more
Secures internal components and mounting brackets in your dishwasher. Replace if missing, stripped, or lost during installation or cabinet remodeling.
Somehow one of the mounting brackets disappeared after I had the cabinets and counter replaced, but these were a perfect replacement. They don't stick out as wide as the original brackets, but I think these are a better design. Also, the I found the original brackets online, but they were way overpriced, so i was glad to find these. Read more
Fix dishes not drying or cycles taking 3+ hours. This heating element heats wash water and enables drying. Moderate DIY repair with video guide.
Ordered new heater/thermostat piece. Read more
The Pump and Motor Assembly is an OEM part for Bosch dishwashers. This assembly includes both the circulation pump and motor, which work together to move water through the dishwasher during the cleaning cycle.
Causes of a bad pump and motor assembly can include wear and tear from regular use, debris or foreign objects obstructing the pump, or electrical issues that affect the motor's performance.
Symptoms of a bad pump and motor assembly include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Replaced the pump. Found ground wire not hooked up on dishwasher. Fixed that then replaced the pump. Little bit of work getting it out but got it done. Dishwasher runs good now. Read more