Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Tine Row Holder is an OEM part for Bosch dishwashers. It is designed to hold and secure the tines in place within the dishwasher rack, allowing you to organize dishes efficiently for optimal cleaning. This holder ensures that the tines remain upright and stable, providing proper spacing for dishes and preventing them from shifting during the wash cycle.
Causes of a bad tine row holder can include regular wear and tear from frequent use, damage from heavy or improperly loaded dishes, or brittleness from prolonged exposure to high temperatures and detergent. These issues can lead to the tine row holder breaking or failing to secure the tines properly.
Symptoms of a bad tine row holder include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
I only needed a flat head screwdriver to remove the clips holding the parts in. It took all of 10 minutes and the dish washer is running great now. Read more
The Diverter Valve Seal is an OEM part for Bosch dishwashers. This rubber seal sits within the diverter valve assembly to protect internal components from liquid, debris and other particles during operation.
Causes of a bad diverter valve seal can include degradation of the rubber material over time from continuous exposure to hot water and detergents. Small cracks or splits can develop and widen.
Symptoms of a bad seal include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
"Watertap" E15 error code indicated leaking. Dried it all out to allow it to run again. Ran dishwasher with front and bottom panels off to get a visual on leak causing the styrofoam float to set off the code. Saw it was coming from the diverter area. Ordered this assembly -- which DOES include the seal ring, by the way -- pulled dishwasher all the way out to replace it, and VOILA. No more leaking or error code. (This took a few days to analyze and receive the part, so in the meantime we... Read more
The Tine Row Holder is an OEM part for Bosch dishwashers. It is designed to securely hold the tines in place within the dishwasher rack, allowing for optimal organization and stability of dishes during the wash cycle.
You should replace this tine row holder if it becomes damaged or fails to secure the tines properly. Causes of a bad tine row holder can include breakage due to heavy loads, wear and tear from frequent use, or damage from accidental impacts.
The Sump Assembly is an OEM part for Bosch dishwashers. It collects and channels water to the pump, ensuring proper circulation and drainage during the wash cycle.
Over time, the sump assembly can become clogged with debris, suffer damage, or wear out, leading to compromised performance. Causes of a bad sump assembly include buildup of food particles and mineral deposits, physical damage from sharp objects, or wear from continuous use.
Symptoms of a bad sump assembly include:
Leak was slow but becoming gradually worse. Pulled dishwasher out from under counter then visually inspected sump while it ran. As soon as the water got very hot, I could see the sump leaking where it meets the stainless pan. Searched for the correct sump gasket without success. Turns out that the gasket is built into the sump for this model. The built-in gasket is very narrow (under-engineered IMHO which is probably why it developed a leak). Thanks to Simon's excellent videos at... Read more
The Door Cable Guide is an OEM part for Bosch dishwashers. This guide ensures the door cables are properly aligned and move smoothly when opening and closing the dishwasher door, helping to maintain the door's balance and functionality.
Causes of a bad door cable guide can include regular wear and tear from frequent use, damage from improper handling, or accumulation of debris that hinders smooth movement. A damaged guide can lead to improper door operation and potential strain on the door cables.
Symptoms of a bad door cable guide include:
Got new replacement spring and cord for our Bosch compact dishwasher. A plastic retaining bracket that held the old spring also was broke but the new spring had its own piece that fit into a slot in the plastic frame, so i just popped it in there, connected the cord, and bingo. The door now works. I tried using the old spring, but it would not work because of the broke bracket. Read more
The Right Door Hinge Lever is an OEM component specifically designed for Bosch dishwashers. It provides stability and positioning for the lower right side of the dishwasher door during opening and closing. Symptoms of a bad right door hinge lever include:
Causes of failure relate to repetitive stresses placed on metal hinges through thousands of door cycles. Over time, fatigue leads to loose fits or stripping that compromise secure engagement. This OEM Bosch part is compatible with Thermador, Gaggenau and some Kenmore models using Bosch components.
It was surprisingly easy to remove the door, remove the hinges, then install the new hinges. On my model, the right hinge has a wiring harness attached, but I just removed from the old hinge and attached it to the new one. You need to be careful about moving the door too far the the cabinet because of attached wires. I needed a torx bit for the screws and a flathead screwdriver for prying the hinges off their pins. Also, a needle-nose pliers helped for pinching the wiring harness clip to... Read more
The Fill Hose is an OEM part for Bosch dishwashers. This hose supplies water from the household plumbing to the dishwasher, ensuring that the appliance has the necessary water for each wash cycle. It is designed to handle the water pressure and ensure a reliable connection to prevent leaks.
Over time, the fill hose can become damaged due to wear and tear, kinks, or exposure to hard water and chemicals. If the hose is compromised, it can lead to water supply issues and potential leaks.
Symptoms of a bad fill hose include:
The Left Door Hinge Lever is an OEM part for Bosch dishwashers. It plays a role in the smooth operation of the dishwasher door, ensuring it opens and closes with ease and security. This part is essential for maintaining the proper alignment of the door, thereby preventing leaks and ensuring the dishwasher operates efficiently.
Causes of a bad Left Door Hinge Lever include normal wear and tear from frequent use, accidental damage, or exposure to high loads that can lead to bending or breaking of the hinge.
Symptoms of a bad Left Door Hinge Lever include:
Originally had a repair done by a local, highly rated, repair service. One year later, door flopped open again. This time I ordered parts from AppliancePartsPro which arrive in two days. Repair was accomplished in one hour, after watching their YouTube video. Parts used by original repair service were not Bosch, were totally inferior. Thank you AppliancePartsPro. Read more
The Check Valve is an OEM part for Bosch dishwashers. This component prevents dirty water from flowing back into the dishwasher from the drain hose, ensuring that the dishwasher maintains proper hygiene and efficient cleaning cycles. It is installed in the drain pump and plays a crucial role in the overall drainage system of the dishwasher.
Causes of a bad check valve can include wear and tear from regular use, accumulation of debris or mineral deposits, or damage from improper installation or handling. A faulty check valve can lead to issues with draining and water contamination within the dishwasher.
Symptoms of a bad check valve include:
It finally gave E15 code, then after drying out the E15 code came back within 5 minutes of running. I dried out the base then I ran the dishwasher and observed water coming down the overflow chute after running only 5 minutes.There is a water inlet (clear water chamber on the side of the machine). It had some gunk inside that was stopping a black float shut-off from moving. I replaced the water inlet chamber. I also suspected the non return valve (also called a check valve). From the parts... Read more
The Water Level Float is an OEM part for Bosch dishwashers. It is a component inside the dishwasher which detects the water level during fill cycles. The float activates sensors to allow for controlled water intake at the proper levels.
Causes of a bad float can include mineral or biofilm buildup affecting mobility, cracks that compromise sealing integrity, or damage to the sensors in the sump area.
Symptoms of a bad water level float include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau, and select Kenmore models.
The Sump to Water Inlet Hose is an OEM replacement part for Bosch dishwashers. This hose provides a pathway connecting the dishwasher's sump and water inlet valve. It allows the sump to fill with water during different dishwashing cycles, facilitating key functions like rinsing, spraying cycles, and final rinses. Proper connection between these components via this hose is required for the dishwasher to operate efficiently.
Causes of a faulty sump to water inlet hose include cracking, leaking, or kinking over repeated use and cycles. Hoses can become damaged due to pinching in the dishwasher or exposure to high water pressures over time.
Symptoms of a bad sump to water inlet hose include:
This replacement part is also compatible with some Thermador, Gaggenau, and Kenmore models.
The Drain Pump LID is an OEM part for Bosch dishwashers, designed to securely cover and protect the drain pump assembly. This crucial component ensures that the drain pump is shielded from debris and damage, allowing it to efficiently remove used water from the dishwasher at the end of each cycle.
Causes of these symptoms can range from physical damage due to impact or wear and tear over time, leading to cracks, warping, or a degraded seal.
Symptoms of a bad Drain Pump LID include:
After fighting, attempting to clean filer a few times, we gave up and ordered one, one with a lid for the drain pump. Dishwasher is running great now. Easy to order. Got the correct part first time. Great Experience! Read more
The Hinge Bushing is an OEM component for Bosch dishwasher models. This bushing acts as a guide and support component for the dishwasher door hinge assembly. It facilitates smooth and quiet opening and closing of the door.
Symptoms of a bad hinge bushing include:
Causes of a bad hinge bushing can be normal wear and tear over the life of the appliance. Small metal particles embedded in the bushing material during manufacturing may also cause premature wear.
Checked out the AppliancePartsPros.com online parts/assembly diagrams for our Bosch dishwasher model and ordered the two sided set of new springs + connector ropes + connector-to-door ... plus a couple of other relatively inexpensive adjoining parts that might have become worn over time, just in case they were needed. The extra parts arrived in two days with standard shipping. Called about the "back ordered" primary set of parts (which had been listed as being "in stock" when I placed the... Read more
The Pump to Heater Hose Clamp is an OEM part for Bosch dishwashers. This clamp secures the hose that connects the pump to the heater, ensuring a tight and leak-free connection. It plays a crucial role in maintaining the integrity of the water flow within the dishwasher, preventing leaks and ensuring efficient operation.
Causes of a bad hose clamp can include wear and tear over time, loosening due to vibrations, or damage from repeated tightening and loosening. A faulty clamp can lead to water leaks, which can cause further damage to the dishwasher.
Symptoms of a bad pump to heater hose clamp include:
On my Bosch she55m15uc/64, the cycle would take 3-4 hours, with the machine stuck on "1 minute" for a long time. The interior was getting moldy and smelly, and the dishes had a white film. At first, I thought it was the heater relay on the control board, but I pulled that relay and it seemed to be working. I could get an ohmmeter on the heater element without taking the bottom off the dishwasher, and the resistance was infinite. Replacing the heater did the trick. On my unit there was a... Read more
The On/Off Switch is an OEM part for Bosch dishwashers. This switch controls the power to the dishwasher, allowing the user to turn the appliance on and off. It is typically located on the control panel and is essential for initiating and halting the wash cycles.
Causes of a bad On/Off switch can include wear and tear from regular use, electrical malfunctions, or physical damage such as cracks or breaks. When the switch fails, it can prevent the dishwasher from powering on or off correctly, disrupting the appliance's functionality.
Symptoms of a bad On/Off switch include:
I bought a new power switch and replaced the old switch. Read more
The Screw Kit (Inner Door) is an OEM part for Bosch dishwashers. It is a comprehensive kit that includes 6 screws required for securing and maintaining the inner door assembly of the dishwasher.
Symptoms of needing a new screw kit:
Causes of a bad screw kit can include missing or stripped screws, corrosion or wear over time, or damage during repair or maintenance work.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwasher models.
Repair estimate was $250 parts, $250 labor to change out the circulating pump. I decided to do it myself. Pump was $166 from AppliancePartsPros. It arrived in 4 days. I looked at the video on their website, followed the instructions step by step and did it myself. They estimated 45 minutes. It took 2 hours.There are always minor differences so always take photos of yours. Suggest that you bag up all screws and pieces from each part as you take them off and label the bag. I had 12 bags with 2 to... Read more